Briidea Power Failure Alarm MK-125 User Manual

Introduction

The Briidea Power Failure Alarm MK-125 is designed to alert you immediately in the event of a power outage or failure. It features both an LED red light flash and an 80dB siren. This device is equipped with a built-in rechargeable lithium battery for continuous operation during power interruptions and an automatic charging function. It also includes an integrated access socket, allowing direct connection of an appliance. The alarm is suitable for monitoring various high-power electrical appliances such as refrigerators, freezers, sump pumps, and aquariums.

Overview of the Briidea Power Failure Alarm highlighting its key features.

Setup Instructions

1. Unpack the Device: Carefully remove the Briidea Power Failure Alarm from its packaging.
2. Select an Outlet: Choose a standard 120V AC wall outlet for installation. Ensure the outlet is easily accessible and located near the appliance you wish to monitor.
3. Plug in the Alarm: Insert the Briidea Power Failure Alarm directly into the chosen wall outlet. The device will begin charging its internal battery automatically.
4. Connect Appliance (Optional): If you need to power an appliance through the alarm, plug the appliance's power cord into the integrated access socket on the front of the alarm. The alarm is designed to not obstruct adjacent outlets.
5. Initial Charge: Allow the device to charge for at least 2-3 hours upon first use to ensure the internal lithium battery is fully charged. The LED indicator may show charging status.

The power failure alarm plugged into a wall outlet, ready to monitor an appliance.

The compact design of the Briidea alarm allows it to occupy minimal space on an outlet.

Operating Instructions

Normal Operation

• Once plugged into a live outlet, the alarm's internal battery will automatically charge.
• The device remains in a standby monitoring state, continuously checking for power supply.

Power Outage Alert

• In the event of a power failure, the alarm will activate immediately.
• The LED indicator light will flash red.
• A loud siren, up to 80dB, will sound to alert you.
• If the power failure is due to a tripped sub-switch for a connected high-power appliance, the alarm provides a targeted alert for that specific circuit problem.

Alarm Release

• To silence the alarm after a power outage, gently press the button located on the front of the device.
• The alarm will automatically reset and resume monitoring once power is restored.

Pressing the button to silence the alarm.

Maintenance

• Battery: The Briidea Power Failure Alarm features a built-in rechargeable lithium-ion battery. This battery is designed for long life and does not require frequent replacement. It charges automatically when the device is plugged into a live power outlet.
• Cleaning: To clean the device, unplug it from the wall outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or immerse the device in water.
• Storage: If storing the device for an extended period, ensure it is fully charged before storage. Store in a cool, dry place.

The alarm features a built-in rechargeable battery that charges automatically.

Troubleshooting

• Alarm does not sound during power outage:
  • Ensure the alarm is securely plugged into a functional wall outlet.
  • Verify the internal battery is charged. Allow several hours for charging if the device was recently unpacked or stored.
  • Test the alarm by temporarily unplugging it from the wall outlet. It should activate.
• Alarm sounds continuously without power outage:
  • Check if the power outlet itself is faulty or if a circuit breaker has tripped.
  • Press the alarm release button to silence it. If it reactivates without a power issue, contact customer support.
• Appliance connected to alarm is not receiving power:
  • Ensure the Briidea Power Failure Alarm is firmly plugged into a live wall outlet.
  • Verify the appliance itself is functioning correctly by plugging it directly into a known working outlet.
  • Check if the appliance's power consumption exceeds the alarm's rated current (16A).

Specifications

Physical dimensions and electrical specifications of the alarm.

Examples of appliances compatible with the power failure alarm.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or contact Briidea directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase for any warranty claims.