PET MARVEL F2

PET MARVEL F2 V2 Wireless Sensing Pet Water Fountain Instruction Manual

Model: F2 V2

Introduction

The PET MARVEL F2 V2 Wireless Sensing Pet Water Fountain is designed to provide fresh, filtered water for your pets. This manual contains important information regarding the setup, operation, and maintenance of your new pet water fountain. Please read it thoroughly before use and retain it for future reference.

PET Marvel F2 V2 Wireless Sensing Pet Water Fountain with a golden retriever and a cat.
PET Marvel F2 V2 Wireless Sensing Pet Water Fountain with a golden retriever and a cat.

Package Contents

Please check the package to ensure all the following components are included:

Exploded view of the PET Marvel F2 V2 water fountain components, including the water tank, stainless steel bowl, wireless pump, and filter.
Exploded view of the PET Marvel F2 V2 water fountain components, including the water tank, stainless steel bowl, wireless pump, and filter.

Setup Instructions

  1. Unpack and Inspect: Carefully remove all components from the packaging and ensure they are free from damage.
  2. Clean Components: Wash the stainless steel bowl, water outlet tray, and water tank with mild soap and water. Rinse thoroughly to remove any residue. Do not wash the base unit or the wireless pump.
  3. Install Filter: Place one F2V2 filter cartridge into its designated slot within the water outlet tray. Ensure it is seated correctly.
  4. Assemble Pump: Position the wireless pump securely into the designated area within the water tank.
  5. Fill Water Tank: Fill the water tank with clean, fresh water up to the 'MAX' line. The maximum capacity is 7 liters (1.8 gallons / 230 ounces).
  6. Assemble Top Section: Place the stainless steel bowl on top of the water tank, followed by the water outlet tray. Ensure all parts fit snugly.
  7. Power Connection: The fountain can operate on its internal 5200mAh Li-ion battery or be continuously powered via an electrical outlet. For initial use, it is recommended to fully charge the battery (approximately 8 hours with a 5V1A charger, or 4.5 hours with a 5V2A charger) or connect the unit to an electrical outlet for continuous operation.
A dog drinking from the PET Marvel F2 V2 water fountain, illustrating the three working modes: Sensor, Time, and Continuous.
A dog drinking from the PET Marvel F2 V2 water fountain, illustrating the three working modes: Sensor, Time, and Continuous.

Operating Instructions

The PET MARVEL F2 V2 offers three distinct operating modes to suit your pet's needs:

Water Shortage Alert: The semi-transparent water tank allows for easy visual monitoring of the water level. Should the water level become too low, a red indicator light will activate as a warning, and the pump will automatically stop to prevent dry burning and damage to the unit.

The PET Marvel F2 V2 water fountain demonstrating its 120-degree intelligent sensing system, which activates water flow when a pet approaches.
The PET Marvel F2 V2 water fountain demonstrating its 120-degree intelligent sensing system, which activates water flow when a pet approaches.
The PET Marvel F2 V2 water fountain showing a red light indicator for a water shortage alert, with a cat in the background.
The PET Marvel F2 V2 water fountain showing a red light indicator for a water shortage alert, with a cat in the background.

Maintenance

Regular maintenance is crucial for the longevity and hygienic operation of your pet water fountain.

Diagram showing the PET Marvel F2 V2 water fountain being disassembled for cleaning, highlighting the 304 stainless steel bowl.
Diagram showing the PET Marvel F2 V2 water fountain being disassembled for cleaning, highlighting the 304 stainless steel bowl.
An illustration detailing the three layers of the PET Marvel F2 V2 water fountain's filtration system: microporous filter cotton, ion exchange resin, and coconut shell activated carbon.
An illustration detailing the three layers of the PET Marvel F2 V2 water fountain's filtration system: microporous filter cotton, ion exchange resin, and coconut shell activated carbon.

Troubleshooting

Q: What is the sensing range?
A: At a room temperature of 27 degrees Celsius, small animals are 100% sensed within a 50cm cone-shaped area. Human detection is possible within 3 meters. Sensing effectiveness can be influenced by ambient temperature and individual differences due to infrared pyroelectricity.
Q: How long can my pet drink from one full fill-up?
A: A 30 lb dog can drink for approximately 10 days, and a cat for approximately 25 days, depending on consumption rates.
Q: The product died soon after receiving it?
A: Due to the characteristics of lithium batteries, the factory power is typically around 50% and can deplete over time. It is recommended to fully charge the product before its first use to ensure optimal performance.
Q: Concern about charger cord overheating or fire hazard?
A: To ensure safety, always use the original or a certified compatible charger (5V1A for slow charge, 5V2A for fast charge). Discontinue use immediately if any signs of overheating, melting, or damage are observed on the charger or cord, and contact customer support for assistance.

Specifications

FeatureSpecification
Capacity7 Liters (1.8 Gallons / 230 Ounces)
Product Dimensions (L x W x H)14.5" x 12" x 8"
Item Weight6.82 pounds
MaterialsAcrylonitrile Butadiene Styrene (ABS), 304 Stainless Steel
Noise Level≤ 25 dB
Battery5200mAh Li-ion
Charging Time (5V1A)Approx. 8 hours
Charging Time (5V2A)Approx. 4.5 hours
Waterproof Rating (Base)IPX4 (Splash-proof)
The PET Marvel F2 V2 water fountain with dimensions labeled: 14.5 inches length, 12 inches width, and 8 inches height, highlighting its 7L capacity.
The PET Marvel F2 V2 water fountain with dimensions labeled: 14.5 inches length, 12 inches width, and 8 inches height, highlighting its 7L capacity.
Graphic illustrating the ultra-quiet operation of the PET Marvel F2 V2 water fountain, showing a noise level of ≤ 25 dB.
Graphic illustrating the ultra-quiet operation of the PET Marvel F2 V2 water fountain, showing a noise level of ≤ 25 dB.

Warranty and Support

Warranty Information: For details regarding the product warranty, please refer to the documentation included with your purchase or contact PET MARVEL customer support directly.

Customer Support: If you encounter any issues or have questions not covered in this manual, please contact PET MARVEL customer service through the retailer where the product was purchased or visit the official PET MARVEL website for support. Providing your product model (F2 V2) and purchase details will help expedite assistance.

Related Documents - F2

Preview Pet Marvel Pet Smart Drinking Fountain Light - Youth Edition User Manual
User manual and product information for the Pet Marvel Pet Smart Drinking Fountain Light - Youth Edition, including setup, usage, specifications, and warranty details.
Preview Pet Marvel Automatic 2-in-1 Pet Feeder & Water Dispenser User Manual
Comprehensive user manual for the Pet Marvel Automatic 2-in-1 Pet Feeder & Water Dispenser (Multi-pet Identification), model A7 Pro. Covers user instructions, product introduction, packing list, usage guide, maintenance, specifications, and warranty information.
Preview PET MARVEL Cordless Automatic Water Dispenser mini - User Manual and Specifications
Comprehensive user manual and specifications for the PET MARVEL Cordless Automatic Water Dispenser mini, including setup, operation, maintenance, and warranty information.
Preview Pet Marvel Smart Pet Feeder [Cubie M2] User Manual
Comprehensive user manual for the Pet Marvel Smart Pet Feeder [Cubie M2], covering setup, operation, maintenance, troubleshooting, and warranty information.
Preview PET MARVEL Smart Pet Feeder [Cubie M3] User Manual
Comprehensive user manual for the PET MARVEL Cubie M3 Smart Pet Feeder, covering setup, usage, maintenance, troubleshooting, and specifications. Learn how to connect to Wi-Fi, dispense food, and care for your device.
Preview Pet Marvel Smart Pet Feeder [Cubie M3] User Manual and Guide
Comprehensive user manual for the Pet Marvel Smart Pet Feeder [Cubie M3], covering setup, usage, maintenance, troubleshooting, and specifications. Learn how to use your smart pet feeder effectively.