Roinside Electric Scooter UP8 User Manual

Introduction

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your Roinside Electric Scooter UP8. Please read this manual thoroughly before first use to ensure proper function and safety.

Image: The Roinside Electric Scooter, shown both in its upright riding position and folded for portability. This illustrates the scooter's design and compact storage capability.

Safety Guidelines

Your safety is paramount. Adhere to all local traffic laws and regulations. Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and gloves, to minimize injury risk in case of a fall.

• The scooter is designed for adult use.
• Ensure the scooter has passed UL2272 certification tests for electrical safety.
• Do not exceed the maximum weight limit of 265 pounds (120 kg).
• Utilize the double braking system (disc braking and EABS regenerative anti-lock braking) for effective stopping.
• Avoid riding in adverse weather conditions or on slippery surfaces.
• Do not expose the battery to freezing temperatures.
• Only one rider at a time.
• Be cautious of wires during assembly and maintenance to prevent damage.

Package Contents

Verify that all items are present in the package:

• Roinside Electric Scooter UP8
• Charger
• User Manual (this document)
• Assembly Tools (if required for handlebar attachment)

Setup

1. Assembly

1. Carefully remove the scooter and all components from the packaging.
2. Attach the handlebar to the main shaft. Ensure the wires connecting the handlebar to the scooter's body are not pinched or damaged during this process. Gently tuck the cable into the shaft.
3. Secure the handlebar with the provided screws.
4. Ensure the folding mechanism is securely locked in the upright position before use.

2. Initial Charging

• Locate the charging port, typically covered by a rubber cap, at the front, bottom left of the scooter.
• Connect the charger to the scooter and then to a power outlet.
• The charger's indicator light will turn red during charging and green when fully charged.
• Initial charging typically takes approximately 5 hours. Do not operate the scooter while it is charging.
• Place the charger in a cool, well-ventilated area during charging to prevent overheating.

3. App Pairing (Optional)

• Download the official Roinside app from your device's app store.
• Follow the in-app instructions to pair your scooter. During pairing, a serial number will be displayed once; it is recommended to screenshot this for future reference, especially for theft reporting.
• Note: Once paired, manual controls may be locked, requiring the app to unlock and operate the scooter.

Operating Instructions

1. Power On/Off

• To power on, press and hold the power button on the handlebar display.
• To power off, press and hold the power button again.

2. Starting Modes

• Electric Start Mode: The scooter accelerates directly from a standstill using the throttle.
• Glide Start Mode: (Requires activation in the app) Push off with your foot to gain initial momentum before engaging the throttle.

3. Acceleration and Braking

• Acceleration: Use the thumb lever on the right side of the handlebar to control speed.
• Braking: The brake lever is on the left side of the handlebar. This activates the double braking system (disc brake and EABS regenerative anti-lock braking). There is also a rear foot brake. Use the handle brake primarily to minimize wear on the rear tire.
• Before riding, lift the front wheel and test the controls, especially the brake, to ensure they are functioning correctly.

4. Speed Modes

Click the power button twice quickly to cycle through speed modes:

• Eco Mode: Approximately 8 mph (13 km/h) - For extended range and beginner riders.
• D Mode: Approximately 11 mph (18 km/h) - Standard mode for balanced performance.
• S Mode: Approximately 19 mph (31 km/h) - Maximum speed for experienced riders. Note: Maximum speed may exceed local legal limits in some areas.

Image: Close-up of the scooter's digital display, illustrating the different speed modes (9 mph, 12.5 mph, 19 mph) and battery charge indicator.

5. Lights and Bell

• Headlight and Taillight: Click the power button once to toggle the white headlight and red taillight on/off for night riding. The taillight flashes when braking.
• Bell: Use the manual thumb lever bell on the left side of the handlebar to alert others.

Image: Detailed view of the scooter's front LED luminous light and rear brake lights, highlighting the integrated safety lighting system.

6. Folding Mechanism

To fold the scooter for storage or transport, locate the folding button/lever near the base of the steering column. Release the lock and fold the stem down until it clicks into place. The mechanism may be stiff initially; ensure no wires are caught.

Image: The Roinside Electric Scooter shown with its dimensions (44 inches upright, 17 inches folded height, 42 inches length) and a person carrying it, demonstrating its portable and foldable design.

Maintenance

• Tires: The scooter features 8.5-inch solid rubber tires, which are puncture-resistant and require minimal maintenance. Regularly inspect them for wear and tear.
• Cleaning: Wipe the scooter with a damp cloth. Avoid using high-pressure water jets or harsh chemicals.
• Battery Care: Charge the battery regularly, even if not in use, to maintain its lifespan. Avoid fully discharging the battery. Store the scooter in a cool, dry place.
• Brakes: Periodically check the brake system for proper function and adjust if necessary.
• General Inspection: Regularly check all screws and fasteners to ensure they are tight. Inspect for any signs of damage or unusual wear.

Image: An internal diagram illustrating the 36V battery pack of the Roinside Electric Scooter, emphasizing its high life and powerful capacity, with a stated 19-mile range and overheating protection.

Troubleshooting

Specifications

Image: An exploded view highlighting the 350W powerful motor of the Roinside Electric Scooter, indicating its 19 mph max speed, 350W max power, and 25% hill grade capability.

Warranty and Support

The Roinside Electric Scooter UP8 comes with a 1-year limited warranty covering manufacturing defects. Additionally, 12 months of service is provided for various parts.

For warranty claims, technical support, or any questions regarding your scooter, please contact Roinside customer service. Refer to the contact information provided on the product packaging or the official Roinside website.

Please have your purchase receipt and scooter serial number ready when contacting support.