Smartwares FSM-11410

Download PDF
Contents

Smartwares FSM-11410 Smoke Detector Instruction Manual

Model: FSM-11410

1. Introduction

This manual provides essential information for the safe and effective use of your Smartwares FSM-11410 Smoke Detector. This device features a photoelectric sensor designed to detect fire and smoldering fires, emitting an 85 dB alarm at 3 meters. It operates wirelessly with a replaceable 6F22 battery, offering a 1-year lifespan. The detector includes a test button and a silent mode for user convenience.

2. What's in the Box

Upon opening the package, please verify that all components are present:

  • Smartwares FSM-11410 Smoke Detector
  • Mounting material (screws and dowels)
  • 6F22 battery
  • Instructions for use (this manual)

3. Setup and Installation

Proper placement and installation are crucial for the effective operation of your smoke detector.

  1. Battery Insertion: Before mounting, insert the provided 6F22 battery into the designated compartment on the back of the detector. The device is designed not to be installed on its base until a battery is correctly inserted.
  2. Location Selection: Smartwares recommends installing at least one smoke detector per floor. Prioritize locations near sleeping areas, in corridors, and within living spaces. Avoid placing detectors in kitchens, bathrooms, or garages where steam, cooking fumes, or exhaust can cause false alarms.
  3. Coverage Area: Each detector covers an area of approximately 40 square meters. Calculate the number of smoke detectors needed based on the total surface area of your property.
  4. Mounting: Use the included screws and dowels to securely mount the detector to the ceiling. Ensure the detector is firmly attached and stable.
Smartwares FSM-11410 smoke detector mounted on a ceiling
Image: Smartwares FSM-11410 smoke detector mounted on a white ceiling, viewed from below. This illustrates a typical installation position for optimal smoke detection.

4. Operating Instructions

Understanding the functions of your smoke detector is essential for safety.

  • Test Button: The detector is equipped with a test button. Press and hold this button to activate a self-test. The alarm should sound loudly, indicating proper functionality. It is recommended to test your device immediately after installation and at least once a month thereafter.
  • Silent Mode: In the event of a non-emergency alarm (e.g., from cooking fumes), the device can be put into silent mode. Press the test/silent button briefly to temporarily silence the alarm. This mode provides several minutes to clear the smoke source before the detector automatically returns to normal monitoring mode.
Front view of Smartwares FSM-11410 smoke detector with test button
Image: Front view of the Smartwares FSM-11410 smoke detector, showing the central test/silence button and the 'S' logo. This button is used for monthly testing and temporary silencing of the alarm.

5. Maintenance

Regular maintenance ensures the longevity and reliability of your smoke detector.

  • Battery Replacement: The 6F22 battery has an approximate lifespan of 1 year. When the battery is low, the detector will emit a regular chirp to indicate that it needs replacement. Replace the battery promptly with a new 6F22 battery.
  • Cleaning: Dust and debris can interfere with the detector's sensor. It is recommended to clean your device regularly, at least once every six months, using a soft brush or a vacuum cleaner with a soft nozzle to remove any dust deposits from the vents.
  • Sensor Lifespan: The photoelectric sensor within the detector has a lifespan of 10 years. After 10 years from the date of manufacture (typically indicated on the device), the entire smoke detector should be replaced, even if it appears to be functioning. Mark the expiry date in your calendar to ensure timely replacement.
Rear view of Smartwares FSM-11410 smoke detector with battery compartment open
Image: Rear view of the Smartwares FSM-11410 smoke detector with the battery compartment open. This shows the location for inserting the 6F22 battery, which powers the device for approximately one year.

6. Troubleshooting

If you encounter issues with your smoke detector, consider the following:

  • False Alarms: If the alarm sounds without apparent smoke, ensure the device is clean and free from dust. Relocate the detector if it is too close to cooking appliances, fireplaces, or areas with high humidity.
  • No Alarm During Test: If the alarm does not sound when the test button is pressed, first check if the battery is correctly inserted and fully charged. Replace the battery if necessary. If the issue persists, the unit may need replacement.
  • Chirping Sound: A regular chirping sound indicates a low battery. Replace the 6F22 battery immediately.

7. Specifications

FeatureDetail
ManufacturerSmartwares
Model NumberFSM-11410
Product Dimensions3.5 x 10 x 10 cm
Item Weight72 g
Power Source6F22 battery
Battery Lifespan1 year (replaceable)
Sensor TypePhotoelectric
Alarm Volume85 dB at 3m
Sensor Lifespan10 years
Included ComponentsSmoke Detector, 6F22 battery, Mounting material, Instructions for use

8. Warranty and Support

No specific warranty information is provided within this instruction manual. For detailed warranty terms, conditions, or technical support, please refer to the documentation included with your original purchase or contact Smartwares customer service directly through their official website or contact channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.