Introduction
Thank you for choosing the HBEZON Medicine Cabinet with LED Lights and Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new cabinet. Please read it thoroughly before installation and keep it for future reference.
This cabinet features smart touch controls, adjustable brightness, three color lighting modes, an anti-fog function, and a memory function. It can be installed as either a wall-mounted or recessed unit, offering versatile placement options for your bathroom.
Important Safety Information
- Electrical Safety: Always turn off the main power supply at the circuit breaker before performing any adjustments or installation procedures involving the light settings or electrical connections.
- Wet Environments: Exercise caution when using the cabinet in wet bathroom environments. Ensure all electrical connections are properly sealed and protected from moisture.
- Installation: For safe installation, follow proper mounting techniques as described in the setup section. Due to the size and weight of the cabinet, it is recommended to have two people for handling and installation.
- ETL Certification: This medicine cabinet is ETL certified, ensuring it meets rigorous safety and performance standards.
Setup and Installation
Unpacking and Inspection
Carefully remove all components from the packaging. Inspect the cabinet and all parts for any damage. Do not proceed with installation if any damage is found. Contact customer support immediately.
Mounting Options
The HBEZON Medicine Cabinet offers two installation methods: wall-mounted or recessed-mounted.
- Wall-Mounted: The cabinet is mounted directly onto the wall surface.
- Recessed-Mounted: The cabinet is installed into a cutout in the wall for a seamless, flush appearance. Recessed installation is recommended for a more integrated look.
Note: If choosing recessed mounting, please remove the side panels of the cabinet before installation.
Figure 1: Recessed Mount vs. Surface Mount Installation
Dimensions and Cutout (for Recessed Mounting)
Refer to the diagram below for precise product and cutout dimensions. Accurate measurements are crucial for a successful recessed installation.
Figure 2: Medicine Cabinet Dimensions and Recessed Cutout Specifications
Electrical Connection
The cabinet requires a hardwired connection. Ensure power is turned off at the circuit breaker before making any electrical connections. Consult a qualified electrician if you are unsure about the wiring process.
Figure 3: Hardwired Connection Diagram
Adjustable Shelves
The cabinet includes two adjustable and removable tempered glass shelves. These can be positioned at various heights to accommodate items of different sizes. To adjust, carefully lift the shelf and reposition the support clips to the desired slots.
Figure 4: Adjustable Tempered Glass Shelves
Operating Instructions
The LED cabinet mirror is controlled by smart touch buttons located on the mirror surface. Ensure the cabinet is properly powered on before attempting to use the touch controls.
Smart Touch Control Overview
Figure 5: Smart Touch Control Icons
Power and Brightness Adjustment
- Turn On/Off: Short press the middle touch button (power icon) to turn the LED light on or off.
- Adjust Brightness: Long press the middle touch button to adjust the brightness. The brightness can be adjusted from 10% to 100%. Release the button when the desired brightness is reached.
Figure 6: Brightness Adjustment
3 Color Lighting Modes
The cabinet LED mirror features three color temperature modes: Warm Light (2700K), Natural Light (4000K), and Cold Light (6500K).
- Change Mode: Short press the right touch button (sun icon) to cycle through the three color lighting modes.
Figure 7: 3 Color Lighting Modes
Anti-fog Function
The built-in anti-fog function helps maintain a clear reflection, especially in steamy bathroom conditions. This function is controlled separately.
- Activate/Deactivate: Short press the left touch button (steam icon) to turn the anti-fog function on or off.
Figure 8: Anti-fog Function in Use
Memory Function
The cabinet is equipped with a memory function that retains the last used light settings (brightness and color temperature). When you turn the light on again, it will resume the previously set mode, eliminating the need to readjust it every time.
Official Product Video
Video 1: HBEZON Medicine Cabinet with LED Lights and Mirror - Features Overview. This video demonstrates the smart touch controls for brightness, color temperature, and anti-fog function, as well as the spacious interior storage.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your HBEZON Medicine Cabinet.
- Cleaning the Mirror: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the mirror surface. Avoid spraying cleaner directly onto the mirror; instead, apply it to the cloth first. Do not use harsh chemicals or abrasive materials that could scratch the mirror or damage the LED components.
- Cleaning the Cabinet: Wipe the metal frame and interior shelves with a damp cloth and mild soap. Dry thoroughly with a clean cloth.
- Electrical Components: Ensure all electrical connections remain dry. If any moisture is observed near electrical parts, disconnect power immediately and allow to dry completely before restoring power.
- Hinges: The cabinet features silent piano hinges. Periodically check hinges for smooth operation and tighten any loose screws if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | No power supply; loose electrical connection; faulty touch sensor. | Check the main power supply at the circuit breaker. Ensure all hardwired connections are secure. Try short pressing the power button firmly. |
| Brightness or color mode cannot be adjusted. | Incorrect touch control usage; temporary sensor malfunction. | Ensure you are long-pressing for brightness and short-pressing the correct button for color mode. Try turning the light off and on again. |
| Anti-fog function is not working. | Anti-fog function is not activated; electrical issue. | Short press the anti-fog touch button to activate. Check power supply. |
| Mirror surface remains foggy. | Anti-fog function not activated; extreme humidity. | Ensure the anti-fog function is turned on. Allow a few minutes for the defogger to work. In extremely humid conditions, it may take longer. |
| Cabinet door does not close smoothly. | Loose hinges; obstruction. | Check hinges for tightness and adjust if necessary. Ensure no items inside the cabinet are obstructing the door's path. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact HBEZON customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | HBEZON |
| Model Name | ARIS |
| Product Dimensions | 4.8"D x 16"W x 28"H |
| Color | Black |
| Material | Metal |
| Finish Type | Powder Coated |
| Mounting Type | Wall Mounted or Recessed Mounted |
| Number of Shelves | 3 (2 adjustable/removable tempered glass) |
| Special Features | Smart Touch Control, Lighting Memory Function, Dimmable (10-100%), 3 Color Lighting Modes (2700K, 4000K, 6500K), Defogger, Soft-close Hinges |
| Item Weight | 20 Pounds |
| Assembly Required | Yes |
| Certifications | ETL Listed |
Warranty and Support
For warranty information, please refer to the documentation included with your purchase or contact HBEZON customer support directly. Keep your purchase receipt as proof of purchase.
If you require assistance, have questions, or need to report an issue, please contact HBEZON customer support. Contact details can typically be found on the product packaging or the official HBEZON website.
