AZDOME GS63H Pro Dash Cam User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AZDOME GS63H Pro WiFi 4K Dash Cam. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The AZDOME GS63H Pro is a high-performance dual dash camera system designed to record video in front UHD 4K (3840*2160P) and rear FHD 1080P (1920*1080P), offering enhanced road safety and evidence recording capabilities.

2. Package Contents

Please verify that all items are present in the package:

• AZDOME GS63H Pro Front Dash Cam
• Rear Camera
• 3-Lead USB Type-C Hardwire Kit (JYX05)
• 64GB Class 10 U3 A2 Memory Card
• Suction Cup Mount
• User Manual

Image: Overview of the AZDOME GS63H Pro Dash Cam and its included accessories, such as the main camera unit, rear camera, hardwire kit, and a 64GB memory card.

3. Setup and Installation

3.1. Inserting the Memory Card

The dash cam comes with a free 64GB Class 10 U3 A2 memory card. Insert the memory card into the designated slot on the dash cam until it clicks into place. Ensure the card is inserted correctly to avoid damage.

Image: A visual representation of inserting the 64GB memory card into the AZDOME dash cam, highlighting the memory card slot and the card itself.

3.2. Mounting the Front Dash Cam

1. Clean the windshield area where you intend to mount the dash cam.
2. Attach the suction cup mount to the front dash cam.
3. Press the suction cup firmly against the windshield and flip the lever to secure it.
4. Adjust the camera angle to ensure a clear view of the road ahead.

3.3. Installing the Rear Camera

Connect the rear camera to the main dash cam unit using the provided cable. Route the cable neatly along the vehicle's interior trim to the rear window. Mount the rear camera on the rear windshield, ensuring it has a clear view.

3.4. Connecting the JYX05 Hardwire Kit

The JYX05 3-Lead USB Type-C Hardwire Kit is included for continuous power and parking mode functionality. This kit converts 12V-24V vehicle power to 5V/2.5A Max for the dash cam.

1. Connect the yellow wire to a constant power source (B+).
2. Connect the red wire to an ACC (ignition switched) power source.
3. Connect the black wire to a ground point (GND).
4. Plug the Type-C connector into the dash cam's power input.

Note: Professional installation is recommended for hardwiring to avoid vehicle electrical issues.

Image: Diagram illustrating the universal compatibility of the JYX05 3-Lead Hardwire Kit, specifically highlighting its Type-C connector for power input to the dash cam.

4. Operating Instructions

4.1. Powering On/Off

The dash cam will automatically power on and begin recording when connected to power and the vehicle ignition is turned on. It will power off automatically when the ignition is turned off (if hardwired correctly).

4.2. Recording Modes

• Loop Recording: The camera continuously records video in short segments (e.g., 1, 3, or 5 minutes). When the memory card is full, it automatically overwrites the oldest unlocked files.
• G-Sensor (Emergency Lock): In the event of a sudden impact or collision, the built-in G-sensor will automatically detect the event and lock the current video segment, preventing it from being overwritten.

Image: Illustrates the dual recording capability of the AZDOME dash cam, showing 4K resolution for the front camera and 1080P for the rear camera, with example road views.

4.3. Parking Mode (with Hardwire Kit)

The AZDOME GS63H Pro offers three parking modes when connected via the hardwire kit:

• Collision Detection Parking Mode: The G-sensor detects impacts and automatically records and locks video.
• Time-Lapse Parking Mode: The dash camera records continuously at a low frame rate for 24 hours, compressing long periods into short videos.
• Motion Detection Parking Mode: The camera automatically starts recording when motion is detected in front of the vehicle.

The system also features low power protection, automatically stopping recording if the vehicle battery voltage drops too low, preventing battery drain.

Image: Visual explanation of the 24-hour parking mode features, including collision detection, motion detection, and time-lapse monitoring, along with low power protection and voice alerts.

4.4. WiFi Connectivity and App Control

The dash cam features built-in WiFi 6 for faster data transmission. Download the AZDOME app on your smartphone to connect to the dash cam.

1. Enable WiFi on your dash cam.
2. Connect your smartphone to the dash cam's WiFi network (SSID and password displayed on the camera screen).
3. Open the AZDOME app to view live footage, playback recordings, download files, and adjust settings.

Image: Depicts the AZDOME dash cam connected to a smartphone via WiFi 6, showcasing the app interface for viewing and managing recordings, emphasizing faster transmission speeds.

5. Maintenance

• Memory Card Formatting: It is recommended to format the memory card regularly (e.g., once a month) within the dash cam settings to ensure optimal performance and prevent data corruption.
• Lens Cleaning: Use a soft, lint-free cloth to gently clean the camera lenses to ensure clear video recordings. Avoid abrasive materials.
• Firmware Updates: Check the AZDOME official website periodically for firmware updates. Updating the firmware can improve performance and add new features.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information and technical support, please visit the official AZDOME website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty claims.

AZDOME Official Website: www.azdome.hk