GEARGO Basic-50amp

GEARGO RV Surge Protector 50 Amp Instruction Manual

Model: Basic-50amp

1. Introduction

This manual provides essential instructions for the safe and effective use of your GEARGO RV Surge Protector 50 Amp. This device is designed to protect your recreational vehicle's electrical system from power surges and to analyze the campground power pedestal for wiring faults before connection.

GEARGO RV Surge Protector 50 Amp

Image 1.1: The GEARGO RV Surge Protector 50 Amp, featuring an ergonomic design and clear indicator lights.

2. Product Features

  • High Surge Protection: Provides up to 15000 Joules of surge protection, safeguarding your RV from high/low voltage and weather-related power fluctuations.
  • RV Circuit Analyzer: Verifies correct wiring and detects common wiring faults such as open ground, open neutral, reverse polarity, reverse hot/ground, and no power.
  • Durable and Weatherproof: Constructed with flame-retardant materials and features IP68 waterproofing, ensuring reliable operation in various weather conditions. The rugged enclosure minimizes fire risks from circuit issues.
  • Ergonomic Design: Equipped with right-angle male plugs for easy connection and disconnection between the power supply and the RV interface.
15000 Joules Surge Protection

Image 2.1: Visual representation of the 15000 Joules surge protection capability, highlighting enhanced safety for RVs.

RV Surge Protector Weather Protection

Image 2.2: The surge protector offers protection against sun exposure, electrical surges, and rain, ensuring durability in outdoor environments.

3. Setup and Installation

Follow these steps to properly connect your GEARGO RV Surge Protector:

  1. Step 1: Connect to AC Power. Plug the male end of the surge protector into the campground's AC power pedestal.
  2. Step 2: Verify Power and Wiring. Observe the indicator lights on the surge protector. Ensure the green light is illuminated, indicating correct wiring. If other lights are on, refer to the "Circuit Analyzer Indicators" section for troubleshooting. Do not proceed if a fault is detected.
  3. Step 3: Connect to RV. Once correct wiring is confirmed (green light on), plug your RV's power cord into the female receptacle of the surge protector.
RV Surge Protector Connection Steps

Image 3.1: Step-by-step guide for connecting the RV surge protector to the power source and then to the RV.

4. Operating Instructions: Circuit Analyzer Indicators

The GEARGO RV Surge Protector features indicator lights that provide immediate feedback on the power pedestal's wiring status. Interpret these lights as follows:

Circuit Analyzer Indicator Light Chart

Image 4.1: Diagram illustrating various indicator light patterns and their corresponding wiring conditions and recommended actions.

Circuit Analyzer Indicator Light Guide
PatternIndicatesResultNext Step
Green, Green, GreenPower onCorrect wiringPlug in your RV
Green, Grey, GreenOpen NeutralWiring faultDo not plug in and check the circuit
Green, Green, GreyOpen GroundWiring faultDo not plug in and check the circuit
Green, Grey, GreyMissing L1 120VWiring faultDo not plug in and check the circuit
Grey, Green, GreyMissing L2 120VWiring faultDo not plug in and check the circuit
Red, Green, GreenReverse PolarityWiring faultDo not plug in and check the circuit
Red, Grey, GreenL1 & Gnd ReversedWiring faultDo not plug in and check the circuit
Red, Green, GreyL2 & Gnd ReversedWiring faultDo not plug in and check the circuit
Grey, Grey, GreyOpen CircuitNo powerDo not plug in and check the circuit

Warning: No surge protection is active when the indicator lights are off.

5. Maintenance

The GEARGO RV Surge Protector is designed for durability and minimal maintenance. To ensure optimal performance and longevity:

  • Regular Inspection: Periodically inspect the unit for any signs of physical damage, such as cracks in the casing or frayed cables.
  • Cleaning: If necessary, gently wipe the exterior of the unit with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is unplugged before cleaning.
  • Weather Protection: The IP68 rating provides significant weather resistance. However, for prolonged exposure to extreme conditions, consider additional shielding to extend the product's lifespan.
RV Surge Protector in Rain

Image 5.1: The surge protector is designed to withstand various weather conditions, including rain, due to its IP68 waterproof rating.

6. Troubleshooting

If the indicator lights show a fault condition (not all green), do not connect your RV. Refer to the "Circuit Analyzer Indicator Light Guide" in Section 4 for specific fault patterns and their meanings. Common troubleshooting steps include:

  • Open Ground/Neutral/Missing Voltage: These indicate issues with the power pedestal's wiring. Contact campground management or a qualified electrician to inspect the power source.
  • Reverse Polarity/Reversed Wires: This is a critical safety issue. Immediately disconnect the surge protector and notify campground management. Do not use the power pedestal until the issue is resolved by a professional.
  • No Power (All lights off): Ensure the power pedestal breaker is on. If still no power, the pedestal may be faulty.

If the surge protector itself appears damaged or is not functioning as expected even with a known good power source, discontinue use and contact customer support.

7. Specifications

SpecificationDetail
BrandGEARGO
ModelBasic-50amp
Item Model NumberRV-02
Amperage50 Amp
Surge Protection15000 Joules
Waterproof RatingIP68
Product Dimensions (L x W x H)10 x 7 x 6 inches
Item Weight3.34 pounds
RV Surge Protector Dimensions

Image 7.1: Product dimensions, illustrating the compact size of the surge protector.

30 Amp vs 50 Amp RV Surge Protector Comparison

Image 7.2: Comparison between 30 Amp (3 plugs) and 50 Amp (4 plugs) RV surge protectors, helping users identify their specific model.

8. Warranty and Support

The GEARGO RV Surge Protector comes with a 3-Year Warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact GEARGO customer service through their official channels or the retailer where the product was purchased.

9. What's in the Box

  • GEARGO RV Surge Protector (50 Amp) x 1
  • User Manual x 1
Contents of the GEARGO RV Surge Protector Box

Image 9.1: The package includes one GEARGO RV Surge Protector and one user manual.

Related Documents - Basic-50amp

Preview GEARGO FC-06 RV Surge Protector User Manual and Specifications
Comprehensive user manual for the GEARGO FC-06 RV Surge Protector, including operating instructions, app connectivity, technical specifications, LED indicators, installation guide, and warranty information. Protect your RV's electrical system from power surges.
Preview MiniBar Crowbar Circuit Basic Kit User Manual
User manual for the MiniBar crowbar circuit basic kit, designed by WA2IVD and manufactured by A2Z Tech LLC. This document details the introduction, board layout, schematic, and wiring options for protecting electronic equipment from over-voltage.
Preview Eisco Basic Electricity Kit Experiment Guide
A comprehensive experiment guide for the Eisco Basic Electricity Kit (CAT NO. BKEPH2011), covering fundamental concepts of electricity through hands-on experiments with circuits, cells, bulbs, switches, ammeters, and voltmeters.
Preview TAPCON® 230 basic Voltage Regulator Operating Instructions
Operating instructions for the TAPCON® 230 basic voltage regulator by Maschinenfabrik Reinhausen. Covers installation, connection, commissioning, operation, and fault elimination for industrial applications.
Preview T238 Digital Trigger Unit V2&V3 BASIC - Programmable MOSFET for Airsoft/Gel Blasters
Comprehensive guide for the T238 Digital Trigger Unit V2&V3 BASIC, a programmable MOSFET for Airsoft and Gel Blaster AEGs. Features include binary trigger, auto-loading, short-circuit protection, overheat protection, and active brake. Includes installation, programming, and troubleshooting instructions.