CAMPINGAZ Super Comfort 7.5 Double Self-Inflating Mattress User Manual

1. Introduction

Thank you for choosing the CAMPINGAZ Super Comfort 7.5 Double Self-Inflating Mattress. This manual provides essential information for the safe and effective use, setup, maintenance, and storage of your mattress. Please read it thoroughly before first use and retain it for future reference.

1.1 Safety Warnings

• Weight Capacity: Do not exceed the maximum weight capacity of 250 kg (approximately 550 lbs). Exceeding this limit can damage the mattress and cause injury.
• Inflation/Deflation: Always follow the proper inflation and deflation procedures to prevent damage to the mattress or potential injury.
• Cleaning: For cleaning, wipe only with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Sharp Objects: Keep the mattress away from sharp objects, open flames, and extreme heat sources.
• Children: This product is not a toy. Adult supervision is recommended when children are near the mattress.

2. Product Overview

The CAMPINGAZ Super Comfort 7.5 Double Self-Inflating Mattress is designed for enhanced comfort during camping or outdoor sleeping. Its self-inflating mechanism simplifies setup, providing a convenient and comfortable sleeping surface.

Image 1: The CAMPINGAZ Super Comfort 7.5 Double Self-Inflating Mattress, showcasing its overall design and dimensions.

2.1 Components

• Self-inflating mattress body
• Integrated inflation/deflation valve
• Carry bag (typically included for storage and transport)

2.2 Key Features

• Self-Inflating: Automatically draws in air when unrolled and valve is opened.
• Double Size: Accommodates two adults comfortably.
• Comfortable Thickness: 7.5 cm (approximately 3 inches) for enhanced insulation and cushioning.
• Durable Material: Constructed from polyester for resilience in outdoor conditions.
• Compact Storage: Designed to roll up for easy transport and storage.

3. Setup Instructions

3.1 Unpacking

1. Remove the mattress from its carry bag.
2. Unroll the mattress completely on a clean, flat surface, ensuring there are no sharp objects underneath.

3.2 Inflation

1. Locate the inflation/deflation valve on the mattress.
2. Open the valve by twisting the cap counter-clockwise. The mattress will begin to self-inflate as air is drawn into the foam core.

Image 2: The mattress valve in the closed position, ready for transport or after inflation.

Image 3: The mattress valve opened, allowing air to enter for self-inflation.

3. Allow 10-15 minutes for the mattress to self-inflate. The time may vary depending on how long the mattress has been stored compressed.
4. For a firmer mattress, you may manually add air by blowing into the open valve until the desired firmness is achieved.
5. Once inflated to your preference, securely close the valve by twisting the cap clockwise until tight.

4. Operating Instructions

Once inflated, the CAMPINGAZ Super Comfort 7.5 Double Self-Inflating Mattress provides a comfortable sleeping or lounging surface. Ensure the valve is securely closed during use to maintain firmness.

Image 4: A couple sitting comfortably on the inflated mattress inside a tent, demonstrating its use for relaxation.

Image 5: Another view of a couple relaxing on the mattress, highlighting its spacious double design.

Image 6: A couple lying down on the mattress, illustrating its comfort for sleeping or leisure activities.

5. Maintenance

5.1 Cleaning

To clean the mattress, simply wipe the surface with a damp cloth. Do not submerge the mattress in water or use harsh detergents, as this may damage the material or internal foam.

5.2 Deflation and Storage

1. Open the inflation/deflation valve completely.

Image 7: The mattress valve opened for deflation, allowing air to escape.

2. Starting from the end opposite the valve, begin to roll the mattress tightly, pushing air out as you go. You may need to kneel on the mattress to expel as much air as possible.
3. Once rolled, close the valve to prevent air from re-entering.
4. Secure the rolled mattress with any included straps or place it directly into its carry bag.

Image 8: A person rolling up the mattress, demonstrating the deflation and packing process.

6. Troubleshooting

• Mattress not fully inflating: Ensure the valve is fully open. Allow more time for self-inflation, especially if stored compressed for a long period. Manually add air if desired.
• Mattress losing air: Check that the valve is securely closed. Inspect the mattress surface for any punctures or leaks. Small punctures can often be repaired with a patch kit (not included).
• Difficulty rolling up: Ensure the valve is fully open to allow air to escape. Roll slowly and apply pressure to expel air effectively.

7. Technical Specifications

8. Warranty and Support

For information regarding warranty coverage, product support, or spare parts availability, please refer to the documentation provided at the time of purchase or contact CAMPINGAZ customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.