Arcchio 10017512

Arcchio LED High-Voltage Recessed Spotlight Aryx

User Manual

Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Arcchio LED High-Voltage Recessed Spotlight Aryx. Please read these instructions carefully before installation and keep them for future reference.

The Aryx LED downlight is designed for indoor use, providing warm white illumination. It features a round design and is constructed from durable die-cast aluminum.

Safety Instructions

  • Installation must be performed by a qualified electrician in accordance with local wiring regulations.
  • Ensure the power supply is disconnected before installation, maintenance, or cleaning.
  • Do not modify the product in any way.
  • This product is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction.
  • The product operates on 230V.

Setup and Installation

Follow these steps for proper installation of your recessed spotlight:

  1. Prepare the Installation Area: Ensure the ceiling material is suitable for recessed lighting. The required installation depth is 4.5 cm.
  2. Cut the Opening: Create a circular opening in the ceiling with a diameter of approximately 8.2 cm. Refer to the dimensions diagram for precise measurements.
  3. Wiring: Connect the spotlight's wires to your main power supply (230V) according to electrical safety standards. Ensure all connections are secure.
  4. Insert the Spotlight: Fold back the spring clips on the sides of the spotlight. Carefully push the spotlight into the prepared opening until the clips spring back and secure the fixture in place.
  5. Test: Restore power and test the functionality of the spotlight.
Diagram showing the dimensions of the Arcchio Aryx recessed spotlight, with a diameter of 8.2 cm, a height of 0.4 cm for the visible part, and an installation depth of 4.5 cm.

Dimensions of the Arcchio Aryx recessed spotlight, indicating a diameter of 8.2 cm, a visible height of 0.4 cm, and an installation depth of 4.5 cm.

Arcchio Aryx recessed spotlight installed flush in a white ceiling, emitting warm white light, blending seamlessly with the modern interior.

The Arcchio Aryx recessed spotlight installed in a ceiling, demonstrating its flush fit and warm white illumination.

Operating Instructions

The Arcchio Aryx LED Recessed Spotlight is designed for simple operation.

  • Power On/Off: The spotlight is controlled by a standard wall switch connected to its power supply. Flip the switch to turn the light on or off.
  • Light Output: The integrated 6W LED provides a consistent warm white light (2700 Kelvin) with a brightness of 880 lumens.
Front view of the Arcchio Aryx LED recessed spotlight, showing its white aluminum housing and the central LED light source.

Front view of the Arcchio Aryx LED recessed spotlight.

Maintenance

To ensure the longevity and optimal performance of your Arcchio Aryx LED Recessed Spotlight, follow these simple maintenance guidelines:

  • Cleaning: Disconnect power before cleaning. Wipe the surface of the spotlight with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Light Source: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need to be replaced.
  • Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

Troubleshooting

If you encounter issues with your Arcchio Aryx LED Recessed Spotlight, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power supply; loose wiring; faulty switch.Check circuit breaker. Ensure all wiring connections are secure. Test or replace the wall switch.
Light flickers.Unstable power supply; loose connection.Check power supply stability. Inspect wiring for loose connections.
Light is dim.Not applicable for this product as LED output is fixed.Ensure the product is receiving full 230V.

If the problem persists after attempting these solutions, please contact a qualified electrician or the retailer for assistance.

Specifications

Detailed technical specifications for the Arcchio LED High-Voltage Recessed Spotlight Aryx (Model: 10017512):

FeatureSpecification
BrandArcchio
Product Dimensions8.2 x 8.2 x 0.4 cm
Weight208 grams
Model Number10017512
ManufacturerArcchio
Protection ClassIP65
Number of Items1
StyleModern
ColorWhite / Opal
ShapeCeiling Recessed
MaterialDie-cast Aluminum
Number of Light Sources1
Scope of DeliveryLight source included
Voltage230 Volts
Application AreaIndoor
Shade MaterialAluminum
Power Source & Plug TypeCorded Electric
Batteries IncludedNo
Batteries RequiredNo
Lamp TypeLED
Energy Efficiency ClassNot Rated
Luminous Flux880 lm
Power Consumption6 Watt
Color Temperature2700 Kelvin
Color Rendering Index (CRI)80.00
First Available on Amazon.deMay 23, 2024
Country of OriginChina
Energy efficiency label for Prios L9002862, showing a 'D' rating and 6 kWh/1000h energy consumption.

Energy efficiency label. For more details, visit: https://eprel.ec.europa.eu/qr/748379

Warranty and Support

Specific warranty details for the Arcchio LED High-Voltage Recessed Spotlight Aryx are not provided within this manual. Please refer to your purchase documentation, the retailer's website, or the official Arcchio website for information regarding warranty coverage and customer support.

For technical assistance or inquiries, please contact the point of purchase or the manufacturer directly.

© 2024 Arcchio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.