OREiN 3500LM Motion Sensor Outdoor Flood Lights (Model OL3600330)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 3500LM Motion Sensor Outdoor Flood Lights. Please read this manual thoroughly before installation and retain it for future reference.

The OREiN Motion Sensor Outdoor Flood Light is designed to provide reliable and efficient outdoor illumination with advanced motion detection capabilities. It features adjustable light heads, multiple operating modes, and a durable, waterproof design suitable for various outdoor environments.

2. Safety Information

WARNING: To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.

• Always turn off the power supply at the circuit breaker before beginning installation or any maintenance.
• Ensure the fixture is properly grounded.
• Do not install near combustible materials.
• Consult a qualified electrician if you are unsure about the installation process.
• Wear safety glasses and gloves during installation.
• This product is designed for outdoor use and is IP65 waterproof.

3. Package Contents

Verify that all components are present before beginning installation:

• OREiN 3500LM Flood Lights (2 units for 2-pack)
• Instruction Manual
• Mounting Brackets
• Screws
• Wire Nuts

4. Product Features

• 3 Lighting Modes: TEST Mode, Dusk-to-Dawn (D2D) Mode, and AUTO (Motion) Mode.
• Wide Motion Detection: Equipped with two infrared detectors for a 240° sensing range and up to 40ft detection distance.
• High Brightness: 3500 Lumens at 5000K (Daylight) with 26W power consumption.
• Adjustable Light Heads: Three light panels with a 340° lighting angle for flexible coverage.
• Durable & Waterproof: IP65 rated for resistance against rain, snow, and wind, made from Acrylonitrile Butadiene Styrene.
• Efficient Heat Dissipation: Designed for long lifespan (50,000 hours).
• Hardwired Electric Powered: Provides stable power and consistent brightness without reliance on batteries or solar charging.

5. Setup and Installation

This flood light is hardwired and requires installation on a junction box. Please follow these steps carefully.

1. Turn off Power: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
2. Secure Mounting Bracket: Attach the metal mounting plate to your existing 2.75” or 3.5” junction box using the provided screws.
3. Connect Wires: Connect the fixture's wires to your household wiring. Typically, this involves connecting:
   • Black (Live) to Black (Live)
   • White (Neutral) to White (Neutral)
   • Green/Bare Copper (Ground) to Green/Bare Copper (Ground)
   Use the provided wire nuts to secure connections.
4. Secure the Light: Align the fixture with the mounting bracket and secure it in place.
5. Insert Waterproof Plug: Ensure all connections are sealed and insert the waterproof plug if applicable to prevent moisture ingress.
6. Restore Power: Once installation is complete, turn the power back on at the circuit breaker.

6. Operating Instructions

The OREiN flood light features an adjustable motion sensor with three operating modes and customizable time and sensitivity settings.

6.1. Adjusting Light Heads

The three light heads can be independently adjusted to direct illumination where needed. The motion sensor itself can also be angled to optimize detection coverage.

6.2. Mode Selection and Adjustments

The motion sensor unit has dials for selecting the operating mode, adjusting the light duration (Time), and setting the motion detection sensitivity (Sens).

• Mode Dial: Selects the operating mode.
  • TEST Mode: The light turns on for 5 seconds when motion is detected, regardless of ambient light conditions (day or night). This mode is for testing the sensor's coverage.
  • D2D (Dusk to Dawn) Mode: The light automatically turns on at dusk and off at dawn. Motion detection is not active in this mode.
  • AUTO (Motion) Mode: The light turns on only at night when motion is detected. The duration the light stays on and the detection distance are adjustable.
• Time Dial: (Applicable in AUTO Mode) Adjusts how long the light stays on after motion is detected. Options typically include 1 minute, 5 minutes, and 10 minutes.
• Sens (Sensitivity) Dial: (Applicable in AUTO Mode) Adjusts the motion detection range. Options typically include 10ft, 20ft, 30ft, and 40ft.

6.3. Product Videos

Watch these videos for a visual guide on the product's features and performance.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your flood light.

• Cleaning: Periodically wipe the light fixture and motion sensor lens with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
• Inspection: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections.
• Lens Care: The sensor filter lens uses ultrasonic technology for a tight seal. Avoid tampering with it.

8. Troubleshooting

If you encounter issues with your OREiN flood light, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information or technical support, please contact OREiN customer service. You can reach us through Amazon directly or by searching for our brand name online to find our official contact channels.

Contact Information:

• Amazon Contact: Visit the OREiN Store on Amazon
• General Support: Search "OREiN" online for official contact details.

We recommend retaining your purchase receipt for warranty claims.