1. Introduction
The Zafferano Poldina XXL is a versatile rechargeable cordless floor lamp designed for both indoor and outdoor use. Its modern design, touch controls, and adjustable height make it a practical lighting solution for various environments. This manual provides essential information for the safe and efficient use of your Poldina XXL lamp.
2. What's in the Box
- Poldina XXL Lamp Unit
- Contact Charging Base
- USB Cable and Power Adapter
- Lamp Shade Rod (3 pieces)
3. Setup & Assembly
The Poldina XXL lamp features an adjustable height mechanism. You can configure its height in three sizes: 27, 43, or 59 inches, using the provided rod pieces.
3.1. Assembling the Lamp
- Unpack all components from the box.
- Determine your desired lamp height (27, 43, or 59 inches).
- Connect the appropriate number of rod pieces to achieve the desired height. Ensure they are securely fastened.
- Attach the lamp head to the top of the assembled rod and the base to the bottom.


3.2. Assembly Video
Video: This video demonstrates the assembly process of the Zafferano Poldina XXL floor lamp, including how to attach the shade and adjust the height.
4. Operating Instructions
4.1. Power On/Off and Brightness Adjustment
The Poldina XXL features a touch button located on the top of the stem. To operate:
- Turn On/Off: Lightly tap the touch button to switch the lamp on or off.
- Adjust Brightness: Press and hold the touch button to dim or brighten the light. Release when the desired brightness is achieved.

4.2. Color Temperature Selection
The lamp allows you to select between two light color temperatures:
- 2700K (Warm White)
- 3000K (Neutral White)
To change the color temperature, tap the touch button rapidly twice. The lamp will cycle between the available color temperatures.
4.3. Charging the Battery
The Poldina XXL lamp is equipped with a rechargeable battery. To charge:
- Connect the USB cable to the power adapter and plug it into a standard electrical outlet.
- Place the lamp onto the contact charging base. Ensure proper alignment for charging to begin.
A full charge takes approximately 20 hours and provides over 15 hours of illumination. The lamp can be used while charging.

4.4. Battery Charge Monitoring
An electronic control system monitors the remaining battery life. This system helps optimize charges and prevents overcharging, ensuring the longevity of the battery.
5. Maintenance
5.1. Cleaning
To clean the lamp, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
5.2. Battery Replacement
The batteries are replaceable when they reach their end of life, typically after approximately 500 charges. Contact Zafferano customer support for information on replacement batteries and service.
6. Troubleshooting
- Lamp does not turn on: Ensure the battery is charged. Place the lamp on the charging base for at least 30 minutes, then try again.
- Lamp does not charge: Verify that the charging base is properly connected to the power adapter and the outlet. Ensure the lamp is correctly seated on the contact charging base.
- Light flickers or is dim: The battery may be low. Recharge the lamp.
- Inconsistent touch control response: Ensure the touch button is clean and dry. Avoid operating with wet hands.
If issues persist, please contact Zafferano customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Zafferano |
| Model Number | LD0360R3 |
| Product Dimensions | 11"D x 11"W x 59"H (Adjustable) |
| Material Type | Aluminum |
| Finish Type | Coated |
| Light Source Type | LED |
| Wattage | 10 watts |
| Color Temperature | 2700K - 3000K |
| Power Source | Battery Powered |
| Control Method | Touch |
| Indoor/Outdoor Usage | Indoor, Outdoor (IP54 rated) |
| Battery Life (Full Charge) | Over 15 hours |
| Charging Time | Approx. 20 hours |
8. Safety Information
- Do not expose the lamp or charging base to extreme temperatures.
- Keep out of reach of children and pets.
- Use only the provided charging base and adapter.
- Do not attempt to disassemble or repair the lamp yourself. Contact qualified personnel for service.
- Ensure the lamp is stable on a flat surface to prevent tipping.
9. Warranty & Support
For warranty information, technical support, or replacement parts, please visit the official Zafferano website or contact their customer service department. Keep your purchase receipt for warranty claims.
