1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your allen + roth Flynn Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The allen + roth Flynn Pendant Light features a faux wood finish and clear seeded glass, designed for indoor use in damp locations. It includes an adjustable cord for customizable hanging height and is compatible with dimmer switches.
2. Safety Information
WARNING: Risk of Electric Shock. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about wiring procedures.
- Always disconnect power before installing, cleaning, or replacing the bulb.
- This fixture is approved for use in damp locations. Do not expose to direct water spray or submersion.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not exceed the maximum wattage specified for the bulb.
- This product is designed for 120 Volts (AC) electrical systems.
CALIFORNIA PROPOSITION 65 WARNING:
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Image Description: This image displays the back of the allen + roth Flynn Pendant Light packaging. It highlights required tools for installation, including screwdrivers, wire strippers, and a ladder. Important warnings, such as the California Proposition 65 notice, are also visible, along with details about dimmer compatibility and bulb requirements.
3. Package Contents
Carefully unpack the fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Pendant Light Fixture (1 unit)
- Mounting Hardware (includes canopy, mounting strap, screws, wire nuts)
Note: Bulb is sold separately. Refer to the Specifications section for recommended bulb type.
4. Required Tools (Not Included)
The following tools are typically required for installation:
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Electrical Tape
- Ladder
5. Setup and Installation
It is recommended to have two people for installation. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Turn Off Power: Locate the circuit breaker or fuse box for the room where you are installing the light and turn off the power. Verify the power is off using a voltage tester.
- Prepare Mounting: Attach the mounting strap to the electrical junction box in the ceiling using the provided screws.
- Adjust Cord Length: The pendant light features an adjustable cord up to 72 inches. Determine your desired hanging height and adjust the cord length by pushing the cord through the canopy. Secure the cord at the desired length.
- Wiring Connections: Carefully connect the fixture's wires to the corresponding house wires.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire from the fixture to the ground wire from the junction box (usually bare copper or green).
- Mount Fixture: Carefully tuck all wires into the junction box. Align the canopy with the mounting strap and secure it with the decorative nuts or screws provided.
- Install Bulb: Screw in an E26 Medium base LED bulb (max 60 watts, sold separately) into the socket.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.
Image Description: This image shows the allen + roth Flynn Pendant Light installed in a room, demonstrating its aesthetic appeal. The pendant light hangs from the ceiling, illuminating the space with its clear seeded glass shade and faux wood finish.
6. Operating Instructions
The allen + roth Flynn Pendant Light is designed for simple operation.
- Standard Operation: Once installed and powered, the light can be turned on and off using a standard wall switch.
- Dimmer Compatibility: This fixture is compatible with most standard dimmer switches. Ensure you use a dimmer switch appropriate for LED bulbs if you are using an LED bulb. Follow the dimmer switch manufacturer's instructions for installation and operation.
- Remote Control: The product specifications indicate a remote control method. If your specific model includes a remote, refer to the separate remote control instructions for pairing and operation.
7. Maintenance
Regular maintenance will help preserve the appearance and functionality of your pendant light.
- Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Bulb Replacement: Always turn off the power before replacing the bulb. Allow the bulb to cool completely before touching. Unscrew the old bulb and screw in a new E26 Medium base LED bulb (max 60 watts).
- Glass Care: The clear seeded glass shade can be carefully removed for more thorough cleaning if necessary. Handle with care to prevent breakage.
8. Troubleshooting
If you encounter issues with your pendant light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is on. |
| Loose wiring connection. | Turn off power, check all wire connections. | |
| Faulty bulb. | Replace bulb with a new one (E26 Medium, max 60W LED). | |
| Light flickers or dims improperly. | Incompatible dimmer switch or bulb. | Ensure dimmer is compatible with LED bulbs. Try a different bulb. |
| Loose wiring. | Turn off power, check all wire connections. |
If these steps do not resolve the issue, contact customer support or a qualified electrician.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | allen + roth |
| Model Name | FLYNN |
| Item Model Number | #CP111BNKW |
| UPC | 080629707153 |
| Light Fixture Form | Pendant |
| Material | Glass (Shade), Faux Wood Finish (Fixture) |
| Color | Clear |
| Style | American |
| Room Type | Kitchen (Recommended) |
| Product Dimensions | 72"L x 5.12"W x 72"H (Adjustable Cord) |
| Indoor/Outdoor Usage | Indoor (Damp Location Approved) |
| Power Source | Electric |
| Voltage | 120 Volts (AC) |
| Special Feature | Adjustable Height |
| Control Method | Remote (if applicable), Dimmer Switch Compatible |
| Light Source Type | LED (Recommended) |
| Bulb Base | E26 Medium |
| Max Wattage | 60 watts |
| Included Components | Mounting Hardware |
| Assembly Required | Yes |
| Item Weight | 2.89 pounds |
Image Description: This image shows the front of the allen + roth Flynn Pendant Light packaging. The light fixture, featuring a faux wood finish and clear seeded glass, is visible. The brand 'allen + roth' and model 'Flynn' are prominently displayed.
10. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact allen + roth customer service directly. Keep your purchase receipt for warranty claims.
For additional assistance, you may visit the manufacturer's website or contact their support line.
