Introduction
Thank you for choosing Linkind Solar Lights. These outdoor solar spotlights are designed to provide efficient and versatile lighting for your garden, yard, patio, and pathways. Featuring 60 ultra-bright LEDs, dual color temperature options (3000K warm white and 6500K cool white), and a sensitive motion sensor with multiple lighting modes, these IP67 waterproof lights offer reliable and energy-saving illumination. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your Linkind solar lights.
What's in the Box
- Solar Landscape Lights ×4
- Plastic Anchor ×4, Plastic Rod ×4
- Knob ×4, Nut ×8
- Gecko Screw ×12, Screw ×12
- User Manual ×1
Key Features
- Upgraded Solar Lights Outdoor: Equipped with 60 ultra-bright LEDs, supporting free switching between cool white (3000K) and warm light (6500K). Features a unique green indicator for energy conversion.
- 3 Lighting Modes & Motion Sensor: Built-in sensitive PIR motion sensor for easy motion capture.
- Waterproof & Multi Applications: IP67 waterproof performance withstands harsh weather (-13℉ to 113℉). Ideal for garden, yard, patio, lawn, pathway, and security lighting.
- Ultra Energy Conversion & Long Lighting Time: Impressive energy conversion rate of up to 30%. Max lighting time of 48 hours in sensor mode.
- 2-in-1 & Easy to Install: Supports both ground insertion and wall mounting without wiring or power support.
Overview of Linkind Solar Light key features including LED count, brightness, color options, and detection capabilities.
Demonstration of the dual color temperature options: 3000K warm white and 6500K cool white.
Visual representation of the three distinct lighting modes available.
Illustration of the efficient charging and long working hours, with a visible charging indicator.
Details on the sensitive motion detection capabilities of the solar lights.
Setup
Your Linkind solar lights offer two convenient installation options: ground insertion and wall mounting.
Ground Insertion
- Attach the plastic rod to the light unit using the provided knob and nut.
- Ensure the connection is secure.
- Insert the assembled light firmly into the ground in your desired location.
- Adjust the angle of the solar panel to maximize sun exposure.
Step-by-step guide for ground insertion installation.
Wall Mounting
- Mark the desired drilling points on the wall.
- Drill holes and insert the plastic anchors.
- Secure the mounting bracket to the wall using the screws.
- Attach the light unit to the mounting bracket.
- Adjust the angle of the light for optimal illumination.
Step-by-step guide for wall mounting installation.
The light offers flexible adjustment for optimal positioning.
Operating Instructions
Power On/Off
Locate the power button on the back of the light unit. Press the button to turn the light on or off.
Switching Color Temperature
The Linkind solar lights support free switching between 3000K warm white and 6500K cool white. Long press the power button for 3 seconds to toggle between the two color temperatures.
Selecting Lighting Modes
The lights feature three distinct lighting modes, selectable by short pressing the power button:
- Mode 1 (Dim Light Mode): The light remains dimly lit throughout the night. The motion sensor is inactive in this mode.
- Mode 2 (Dim Light Sensor Mode): The light stays at a low brightness. When motion is detected, it switches to high brightness for a period (e.g., 20 seconds), then returns to low brightness.
- Mode 3 (Sensor Mode): The light remains off. When motion is detected, it switches to high brightness for a period (e.g., 20 seconds), then turns off again.
Visual guide to the three operational lighting modes.
Maintenance
Cleaning
Regularly clean the solar panel and light surface with a soft, damp cloth to ensure optimal charging efficiency and light output. Avoid using abrasive cleaners or harsh chemicals.
Battery Care
The integrated Lithium Ion batteries are designed for long-term use. For best performance, ensure the solar panel receives direct sunlight for at least 6-8 hours daily. If the lights are stored for an extended period, fully charge them before storage and recharge every few months to maintain battery health.
Weather Resistance
These lights are IP67 waterproof, designed to withstand rain, snow, and extreme temperatures from -13℉ to 113℉. While highly durable, avoid submerging the lights in water for prolonged periods.
The IP67 rating ensures high water resistance and durability against various weather conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel is in a location that receives 6-8 hours of direct sunlight daily. Clean the solar panel surface. |
| Light is dim or only stays on for a short period. | Partial charge or aging battery. | Relocate the light to a sunnier spot. Allow several days for a full charge. If issues persist after extended use, the battery may need replacement (contact support). |
| Motion sensor not detecting. | Obstruction or incorrect mode. | Ensure the sensor lens is clean and unobstructed. Verify the light is in Mode 2 or Mode 3. |
| Light flickers. | Low battery or loose connection. | Allow the light to fully charge. Check all connections for tightness. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Linkind |
| Model Name | LL18001-SP004 |
| Part Number | LL18001-SP004M |
| Color | Motion-Dualcolor (Cool White, Warm White) |
| Material | Acrylonitrile Butadiene Styrene |
| Light Source Type | LED (60 LEDs) |
| Brightness | 800 Lumen |
| Power Source | Solar Powered |
| Energy Conversion Efficiency | 30% |
| Water Resistance Level | IP67 Waterproof |
| Product Dimensions | 2.36"L x 4.41"W x 3.94"H |
| Item Weight | 1.8 Pounds |
| Batteries | 4 Lithium Ion batteries (included) |
| Installation Type | Ground Inserted, Wall Mount |
| Control Method | Push Button |
Warranty and Support
Linkind is committed to providing high-quality lighting products and excellent customer service. Our team has extensive expertise in lighting solutions, ensuring innovative and reliable products.
- Quick Response: We aim to provide a quick response within 24 hours for any inquiries.
- 30 Days Return: Enjoy a 30-day no-reason return policy.
- 12 Months Replacement: Unconditional replacement for you within 12 months.
- Lifetime Warranty: We provide permanent service and technical support for our products.
For any questions, technical assistance, or warranty claims, please contact Linkind customer support through your purchase platform or visit the official Linkind store.
Linkind's commitment to customer service and product support.