AutoFull Gaming Chair C3 Instruction Manual

Introduction

This manual provides essential information for the setup, operation, and maintenance of your AutoFull C3 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your chair.

The AutoFull C3 Gaming Chair is designed for comfort during long hours of use, featuring an ergonomic wingless cushion, adjustable armrests, and a footrest for enhanced relaxation. Its sturdy construction ensures durability and stability.

Safety Information

For safe use, please follow the assembly instructions carefully and ensure the chair is used by a person within the maximum weight capacity of 350 pounds (158 kg).

Always ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners as needed.

Setup and Assembly

Your AutoFull C3 Gaming Chair requires assembly. Detailed assembly instructions are typically included in the product packaging. Please refer to those specific instructions for step-by-step guidance.

General Assembly Steps:

1. Unpack all components and verify against the parts list.
2. Assemble the chair base and attach the casters.
3. Insert the gas lift cylinder into the base.
4. Attach the seat mechanism to the bottom of the seat cushion.
5. Connect the backrest to the seat cushion.
6. Attach the armrests to the seat.
7. Place the assembled seat onto the gas lift cylinder.
8. Attach any additional accessories like lumbar and headrest pillows.

It is recommended to have two people for assembly to ensure stability and ease of handling larger components.

Image: The AutoFull C3 Gaming Chair, fully assembled and ready for use. This image shows the chair's overall design, including the headrest, lumbar support, and footrest.

Operating Instructions

The AutoFull C3 Gaming Chair offers several adjustable features to customize your seating experience.

Height Adjustment

To adjust the chair's height:

• To raise the seat: Lift the operating lever located on the lower right side of the chair while standing up. The seat will rise automatically.
• To lower the seat: Lift the operating lever while seated. The seat will lower under your weight.

Recline Function

The backrest can be reclined between 90° and 160° and locked at any angle.

• To recline: Lift the recliner wrench upward (typically on the left side) and lean back to your desired angle. Release the wrench to lock the position.
• To return to upright position: Lift the recliner wrench and lean forward. The backrest will return to the upright position.

Image: Illustration showing the 90-160° recline capability of the chair, suitable for PC gaming, mobile gaming, and resting.

Adjustable Armrests

The armrests can be adjusted for height and rotation.

• To adjust height: Move up the paddle on the outside of the armrest and lift or lower the armrest to your desired height. Release the paddle to lock.
• To rotate: Rotate the front end of the armrest left and right to achieve internal or external rotation.

Image: Diagram illustrating the 2.75-inch lift, 60° rotation, and U-shaped anti-skid features of the adjustable armrests.

Footrest Operation

The integrated footrest provides additional comfort for relaxation.

• To extend: Pull out the foot support from underneath the seat. Flip over the foot support to create a flat surface.
• To retract: Flip the foot support back and push it underneath the seat until it is fully stored.

Demonstration Video

Maintenance and Care

Proper care will extend the life and appearance of your AutoFull C3 Gaming Chair.

• Cleaning: Wipe clean with a damp cloth. For tougher stains on the PU leather, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and safety.
• Casters: Keep casters free of hair and debris to ensure smooth movement.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the PU leather to fade or crack.

Image: Close-up of the chair's 100,000 wear-resistant leather with an easy-clean coating, highlighting its durability and maintenance benefits.

Troubleshooting

If you encounter any issues with your AutoFull C3 Gaming Chair, please refer to the following common solutions:

• Chair Squeaks: Check all bolts and screws for tightness and re-tighten if loose. A small amount of silicone lubricant can be applied to moving parts if the squeaking persists.
• Difficulty Adjusting Height: Ensure the gas lift lever is fully engaged. If the chair does not rise or lower, the gas lift cylinder may need replacement. Contact customer support.
• Casters Not Rolling Smoothly: Inspect casters for trapped debris (hair, lint, etc.) and clean them thoroughly.
• Backrest Not Locking: Verify that the recline mechanism is free of obstructions and that the lever is fully released to engage the lock.

If these steps do not resolve the issue, please contact AutoFull customer support for further assistance.

Specifications

Image: Detailed diagram showing the dimensions of the AutoFull C3 Gaming Chair, including seat height, backrest height, and width, along with recommended user height and maximum load capacity.

Image: Cross-section view of the chair's cushion, highlighting the high-density styling cotton designed for long-term comfort and resistance to deformation.

Warranty and Support

AutoFull provides users with 36 months of parts replacement or repair service from the date of purchase. This warranty covers manufacturing defects and functional issues under normal use.

For warranty claims, technical support, or any suggestions regarding your chair, please contact AutoFull customer service. Keep your proof of purchase for warranty validation.

Contact Information: Please refer to the contact details provided in your product packaging or on the official AutoFull website.