URAQT LED Bicycle Lights User Manual

Introduction

The URAQT LED Bicycle Lights (Model KS-ZXCD240423-FBA) provide powerful illumination for night cycling and other outdoor activities. This set includes a super bright 9500 Lumen front light with 12 LED beads and a rear light, both USB rechargeable and IP65 waterproof. The front light features 5 lighting modes and an integrated horn with 6 sound options, while the rear light offers 4 modes. Designed for easy installation and removal, these lights enhance visibility and safety during your rides.

Image: The URAQT bicycle lights are suitable for various activities beyond cycling, such as camping, fishing, running, and dog walking, providing versatile illumination.

What's in the Box

• 1 x Bicycle Headlight
• 1 x Bicycle Taillight
• 1 x USB Data Cable
• 1 x Speaker Button Cable

Specifications

Image: This image illustrates the key specifications of both the bicycle headlight and taillight, including their LED count, battery capacity, lumen output, and waterproof rating.

Setup and Installation

1. Front Light Installation: Attach the mounting bracket securely to your bicycle handlebar. Slide the headlight onto the bracket until it clicks into place. Ensure the light is firmly attached and angled correctly to illuminate the path without blinding oncoming traffic.
2. Rear Light Installation: Attach the rear light to the seat post or another suitable location using its adjustable strap or clip. Ensure it is visible from behind for maximum safety.
3. Speaker Button Cable: Connect the speaker button cable to the designated port on the headlight. Position the horn button within easy reach on your handlebar for convenient operation.

Image: The URAQT headlight is shown securely mounted on a bicycle handlebar, illustrating the ease of installation.

Operating Instructions

1. Power On/Off: Press the power button on the headlight to turn it on. Press and hold the power button to turn it off.
2. Headlight Modes: While the headlight is on, press the power button repeatedly to cycle through the 5 available lighting modes: High, Medium, Low, Strobe, and SOS.
3. Taillight Modes: Press the button on the taillight to cycle through its 4 distinct lighting modes.
4. Horn Operation: Press the separate horn button to activate the integrated horn. To change the horn sound, press and hold the horn button for approximately 5 seconds.

Image: This diagram details the five operational modes of the headlight and highlights its integrated buzzer function, indicating a light travel distance of 150 meters.

Charging

The headlight features a built-in 1800mAh rechargeable lithium battery. For optimal performance, ensure the battery is fully charged before use.

• Connect the provided USB data cable to the Type-C input port on the headlight.
• Connect the other end of the USB cable to a compatible USB power source, such as a computer, power bank, car charger, or a wall adapter.
• The digital display on the headlight will show the current battery level during charging.
• A full charge typically takes approximately 4 hours.
• The headlight can also function as a power bank. Connect your mobile device to the USB output port for emergency charging when needed.

Image: The image demonstrates the USB charging capability of the URAQT bicycle lights, compatible with various power sources.

Image: This image highlights the dual interface design of the headlight, featuring a Type-C port for charging and a standard USB port for emergency mobile device charging.

Maintenance

• Cleaning: Wipe the lights with a soft, damp cloth to remove dirt and dust. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product's finish or internal components.
• Storage: When not in use for extended periods, store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery life, charge the battery regularly, even if the lights are not used frequently. Avoid fully discharging the battery for extended periods, as this can reduce its overall lifespan.

Troubleshooting

• Light Not Turning On:
  • Check if the battery is charged. Recharge the light if the battery level is low.
  • Ensure the power button is pressed correctly and held for the appropriate duration if required.
• Light Not Holding Charge:
  • Verify that the charging cable and the USB power source are functioning correctly.
  • Ensure the charging port on the light is clean and free of any debris that might obstruct the connection.
• Horn Not Working:
  • Check the connection of the speaker button cable to the headlight. Ensure it is securely plugged in.
  • Inspect the horn button for any visible damage.
• Water Ingress: While the lights are IP65 rated for water resistance, avoid submerging them in water. If water accidentally enters the unit, allow it to dry completely in a well-ventilated area before attempting to use it again.

Safety Information

• Always ensure the bicycle lights are securely mounted to your bicycle before each ride to prevent them from falling off.
• Adjust the headlight beam angle to illuminate the path effectively without dazzling oncoming pedestrians or vehicle drivers.
• Do not look directly into the light beam for extended periods, as the high lumen output can cause temporary eye strain or discomfort.
• The IP65 waterproof rating provides protection against splashes and rain but does not guarantee protection against submersion in water.
• Regularly check the battery level to ensure sufficient power for your planned ride, especially during night cycling.

Image: This image illustrates the design of the URAQT headlight beam, which is intended to be considerate of other road users by minimizing glare.

Warranty and Support

For warranty information, technical assistance, or any product-related inquiries, please contact URAQT customer service. It is recommended to retain your proof of purchase for any warranty claims.