IFANNY HU10689
Contents
IFANNY Twin Over Twin Bunk Bed Instruction Manual
Model: HU10689
Introduction
This instruction manual provides comprehensive guidance for the safe assembly, operation, and maintenance of your IFANNY Twin Over Twin Bunk Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1: IFANNY Twin Over Twin Bunk Bed (Silver)
Important Safety Information
Failure to follow these warnings and instructions could result in serious injury or death.
- Maximum Weight Capacity: The upper bunk and lower bunk each have a maximum weight capacity of 330 lbs (150 kg). Do not exceed this limit.
- Mattress Requirements: Use only twin-size mattresses (74.5"L x 39"W). The mattress surface of the upper bed must be at least 5 inches (13 cm) below the top edge of the guardrail.
- Guardrails: Always use the guardrails on the upper bunk. Ensure they are properly installed and secured.
- Ladder Safety: Always use the ladder for entering and exiting the upper bunk. Do not use the bed as a play structure.
- Children: The upper bunk is not suitable for children under 6 years of age.
- Assembly: Assemble the bed on a soft, clean surface to prevent damage. Ensure all connections are tight before use. Periodically check and tighten all bolts.
- Ventilation: Ensure adequate ventilation around the bed.
- No Jumping: Do not jump on the bed.
- Modifications: Do not modify the bed structure in any way. Use only manufacturer-approved replacement parts.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer service immediately.
- 1 x IFANNY Twin Over Twin Bunk Bed Frame (Silver)
- All necessary hardware (bolts, nuts, washers, etc.)
- Assembly Tools (e.g., Allen wrench)
- 1 x User Guide (this manual)
Product Specifications
| Feature | Detail |
|---|---|
| Brand | IFANNY |
| Model Number | HU10689 |
| Color | Silver |
| Material | Metal |
| Overall Dimensions | 78"L x 41"W x 54"H (198.12 x 104.09 x 137.16 cm) |
| Applicable Mattress Size | 74.5"L x 39"W (Twin Size, not included) |
| Weight Capacity (Upper Bed) | 330 lbs (150 kg) |
| Weight Capacity (Lower Bed) | 330 lbs (150 kg) |
| Guardrail Height | 10 inches (25.4 cm) |
| Net Weight | 75 lbs (34 kg) |
| Special Features | Ladder, No Box Spring Needed, Safety Guard Rails, Powder Coated Finish |

Figure 2: Product Dimensions and Key Features
Assembly Instructions
Before you begin, ensure you have enough space and all parts are accounted for. It is recommended to have two adults for assembly.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Identify Parts: Refer to the included parts list and diagrams to identify each component.
- Assemble Base Frames: Begin by assembling the headboard and footboard sections for both the upper and lower bunks. Secure connections with the provided bolts and tools.
- Attach Side Rails: Connect the side rails to the assembled headboard and footboard sections for both the upper and lower bunks. Ensure all bolts are finger-tight at this stage.
- Install Slats: Place the heavy-duty metal slats onto the support rails for both the upper and lower bunks. Secure them according to the diagram. These slats provide mattress support and eliminate the need for a box spring.

Figure 3: Heavy-Duty Metal Slats and Firm Bolt Connections
- Connect Bunks: Carefully lift the upper bunk frame and place it onto the lower bunk frame, aligning the connection points. Secure with the designated bolts.
- Install Guardrails: Attach the full-length guardrails to the upper bunk. Ensure they are securely fastened to prevent falls.
- Attach Ladder: Securely attach the ladder to the designated side of the bunk bed. Verify that it is stable and can support weight safely.

Figure 4: Guardrails and Ladder for Safe Access
- Final Tightening: Once all components are in place, systematically tighten all bolts and screws using the provided tools. Do not overtighten.
- Placement: Position the bunk bed against a wall for added stability, if possible.
Operating Instructions
This section outlines the proper use of your IFANNY Bunk Bed.
- Mattress Installation: Place a twin-size mattress on both the upper and lower bunks. Ensure the upper mattress does not exceed the guardrail height requirement (at least 5 inches below the top edge).

Figure 5: Correct Mattress Placement for Upper Bunk Safety
- Accessing Upper Bunk: Always use the integrated ladder to climb to and descend from the upper bunk. Face the ladder when climbing.
- Lower Bunk Use: The lower bunk is designed as a floor bed, making it easily accessible for younger children. It can also be used for storage of blankets or quilts if a mattress is not present.
- Space-Saving Design: The compact twin-over-twin design is ideal for maximizing space in smaller rooms or for accommodating multiple users. The low height of 54 inches is suitable for rooms with lower ceilings.

Figure 6: Low Profile Design for Easy Access
Maintenance and Care
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish.
- Regular Checks: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Tighten any loose fasteners to maintain structural integrity and safety.
- Moving the Bed: When moving the bunk bed, lift it rather than dragging it to prevent damage to the frame or flooring.
- Environmental Conditions: Avoid placing the bed in direct sunlight or near heat sources, which could affect the material over time.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose bolts or improper assembly. | Check all bolts and connections. Tighten any loose fasteners. Ensure all parts are correctly aligned according to the assembly instructions. |
| Squeaking noises. | Loose connections or friction between metal parts. | Tighten all bolts. Apply a small amount of lubricant (e.g., silicone spray) to connection points if squeaking persists. |
| Missing parts. | Packaging error. | Contact IFANNY customer service with your purchase details and the specific missing parts. |
| Difficulty assembling. | Misinterpretation of instructions or parts misalignment. | Review the assembly instructions carefully. Ensure parts are oriented correctly. Do not force components together. If issues persist, contact customer service. |
Warranty and Customer Support
IFANNY products are designed for quality and durability. For specific warranty details, please refer to the documentation included with your purchase or visit the official IFANNY website. If you encounter any issues or have questions regarding your bunk bed, please contact our customer service team.
Customer Service: For assistance, please contact IFANNY customer service. Have your model number (HU10689) and purchase date ready.
Online Support: Visit the IFANNY Store on Amazon for more product information and support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.