Peakeep Projection Alarm Clock MHP6050 User Manual

1. Safety Information

Please read these instructions carefully before using the Peakeep Projection Alarm Clock. Keep this manual for future reference.

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the clock to strong impacts.
• Use only the provided power adapter.
• Keep out of reach of children.
• Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel.

2. Product Overview

The Peakeep Projection Alarm Clock MHP6050 is designed to provide convenient time display, alarm functions, and additional features for your bedroom or office.

2.1 Key Features

• 180° Rotatable Projection: Projects time onto ceiling or wall with adjustable brightness and focus.
• Colorful Nightlight: RGB color-changing nightlight for ambient lighting.
• Large LED Display: 5.5-inch display with 2.1-inch numbers and 6 levels of adjustable brightness.
• Adjustable Alarm Volume: 5 alarm volume levels (60-108 dB) for heavy sleepers.
• Battery Backup: Maintains time and alarm settings during power outages (requires 2 AAA batteries, not included).
• USB Charging Port: Conveniently charge your mobile devices.

2.2 Components and Controls

Familiarize yourself with the clock's components and control buttons.

Figure 1: Rear view of the alarm clock with labeled buttons.

• DIMMER: Adjusts display brightness.
• TIME SET (2S): Press and hold for 2 seconds to enter time setting mode.
• 12/24HR: Toggles between 12-hour and 24-hour time format.
• VOLUME (+/-): Adjusts alarm volume.
• ALARM SET ON/OFF: Sets and activates/deactivates the alarm.
• NIGHTLIGHT ON/OFF: Controls the colorful nightlight.
• PROJECTION DIMMER: Adjusts projection brightness.
• PROJECTION ON/FLIP/OFF: Turns projection on/off and flips the projected image.
• FOCUS Wheel: Adjusts the clarity of the projected time.
• USB OUT (5V): USB charging port.
• 5V IN: Power input port.
• Battery Compartment: For AAA backup batteries.

3. Setup

3.1 Power Connection

1. Connect the included AC/DC adapter to the "5V IN" port on the back of the clock.
2. Plug the adapter into a standard wall outlet. The display will light up.

Figure 2: Power connection and USB charging port.

3.2 Battery Backup Installation

For backup during power outages, install 2 AAA batteries (not included).

1. Open the battery compartment cover on the back of the clock.
2. Insert 2 AAA batteries, observing the correct polarity (+ and -).
3. Close the battery compartment cover.

Note: Batteries only provide backup for time and alarm settings; the display and projection will not function during a power outage.

3.3 Initial Time Setting

1. Press and hold the TIME SET (2S) button for 2 seconds. The hour digits will flash.
2. Use the VOLUME + or VOLUME - buttons to adjust the hour.
3. Press TIME SET again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the VOLUME + or VOLUME - buttons to adjust the minutes.
5. Press TIME SET once more to confirm and exit time setting mode.
6. To switch between 12-hour and 24-hour format, press the 12/24HR button.

4. Operating Instructions

4.1 Setting the Alarm

1. Press and hold the ALARM SET ON/OFF button for 2 seconds. The alarm hour digits will flash.
2. Use the VOLUME + or VOLUME - buttons to adjust the alarm hour.
3. Press ALARM SET ON/OFF again to confirm the hour and move to minute setting. The alarm minute digits will flash.
4. Use the VOLUME + or VOLUME - buttons to adjust the alarm minutes.
5. Press ALARM SET ON/OFF once more to confirm and exit alarm setting mode.
6. To activate or deactivate the alarm, short press the ALARM SET ON/OFF button. An alarm icon will appear/disappear on the display.

4.2 Adjusting Alarm Volume

The alarm clock offers 5 volume levels (60-108 dB).

1. During normal time display, press the VOLUME + or VOLUME - buttons to cycle through the 5 alarm volume levels.
2. The current volume level (U01-U05) will be shown on the display.

Figure 3: Alarm volume levels.

4.3 Using the Projection Feature

The clock can project the time onto a ceiling or wall.

Figure 4: High definition projection features.

• Turn On/Off Projection: Short press the PROJECTION ON/FLIP/OFF button to turn the projection on or off.
• Rotate Projection: The projection arm can be rotated 180 degrees to adjust the projection angle.
• Adjust Projection Brightness: Press the PROJECTION DIMMER button to cycle through 5 brightness levels (L01-L05).
• Adjust Projection Focus: Rotate the FOCUS Wheel on the side of the projection arm to achieve a clear image.
• Flip Projection: Press and hold the PROJECTION ON/FLIP/OFF button to flip the projected image 180 degrees.

Figure 5: Adjustable projection brightness levels.

4.4 Using the Colorful Nightlight

The clock features an RGB color-changing nightlight.

1. Press the NIGHTLIGHT ON/OFF button to turn the nightlight on or off.
2. When on, the nightlight will cycle through various colors.

Figure 6: Colorful nightlight feature.

4.5 Adjusting Display Brightness

The main LED display has 6 levels of adjustable brightness, including an OFF setting.

1. Press the DIMMER button to cycle through the 6 brightness levels (L1-L5 and OFF).

Figure 7: Display brightness levels.

4.6 Using the USB Charging Port

The clock includes a USB-A output port (5V) for charging external devices.

1. Connect your device's USB charging cable to the "USB OUT" port on the back of the clock.
2. Ensure the alarm clock is powered via the AC/DC adapter.

Note: The USB charging port will not function when the clock is running on battery backup.

5. Maintenance

• Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the projection lens clean for optimal clarity.
• Replace backup batteries annually or when they are depleted to ensure settings are retained during power interruptions.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Peakeep customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the Peakeep Store on Amazon.