1. Introduction
Thank you for choosing the Vitafit 500g Digital Pocket Scale. Designed with over 20 years of professional experience, this high-precision scale provides accurate measurements for a wide range of applications, from laboratory use to kitchen, coffee, and jewelry weighing. Its compact and user-friendly design makes it an ideal tool for both indoor and outdoor precision weighing needs.
2. Key Features
- High Accuracy: Guaranteed 0.01g gram division up to 500g capacity.
- Portable Design: Pocket-sized with a crafted hinge for convenient opening and closing, ideal for on-the-go use.
- Versatile Units: Supports 6 different weight units: g (grams), ozt (troy ounces), ct (carats), gn (grains), tl (taels), and dwt (pennyweights).
- Clear LCD Display: Extra-large 1.6x0.8 inch (40x20mm) blue backlit LCD for easy viewing in any conditions.
- User-Friendly Operation: Soft-touch buttons for Power/Tare and Unit Switch.
- Stainless Steel Tray: Comfortable 3.1x2.7 inch (78x68mm) stainless steel weighing platform.
3. Package Contents
- 1 x Vitafit 500g Digital Pocket Scale (Model: VT737)
- 3 x AAA Batteries (pre-installed or included separately)
4. Setup
4.1 Battery Installation
The Vitafit Pocket Scale requires 3 AAA batteries for operation. These are typically included. To install or replace batteries, open the battery compartment cover located on the underside of the scale. Insert the batteries, ensuring correct polarity (+/-), then close the cover securely.
4.2 Initial Placement
For accurate measurements, place the scale on a firm, flat, and horizontal surface. Avoid placing it on soft, uneven, or vibrating surfaces, as this can affect precision.
5. Operating Instructions
5.1 Basic Weighing
- Place the scale on a horizontal and secure surface.
- Press the 'POWER' button to power on the scale.
- Wait until '0.00' is displayed on the LCD screen. This indicates the scale is ready for use.
- Gently place the object you wish to weigh onto the stainless steel weighing tray. The weight will be displayed on the screen.
5.2 Unit Conversion
The scale supports multiple units of measurement. To switch between units (g, ozt, ct, gn, tl, dwt, oz):
- Press the 'UNIT' button repeatedly until your desired unit is displayed. The current unit will be shown on the LCD.
Image: The scale's display cycling through various measurement units like grams, ounces, carats, and pennyweights, demonstrating the unit conversion feature.
5.3 Tare Function
The Tare function allows you to subtract the weight of a container or other items to get the net weight of your desired object.
- Place an empty container on the weighing tray.
- Press the 'TARE' button. The display will reset to '0.00'.
- Now, place the items you wish to weigh into the container. The display will show only the weight of the items, excluding the container.
Image: A small bowl containing jewelry being weighed on the scale, illustrating its use for precise measurements of small items.
5.4 Power Off
To power off the scale, keep pressing the 'POWER' button for approximately 3 seconds. The scale will also automatically power off after a period of inactivity to conserve battery life.
6. Maintenance and Care
6.1 Cleaning
To clean the scale, wipe it with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water. Ensure the scale is dry before storage or next use.
Image: A hand gently wiping the scale's surface with a soft cloth, demonstrating proper cleaning technique.
6.2 Storage
Store the scale in a cool, dry place. If the scale will not be used for an extended period, it is recommended to remove the batteries to prevent leakage and damage.
Image: The Vitafit Pocket Scale shown in its closed, compact state, highlighting its user-friendly design for easy storage and portability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale does not turn on | Low or dead batteries; Incorrect battery installation | Replace batteries; Check battery polarity |
| Inaccurate readings | Unstable surface; Overload; Object not centered; Drafts | Place on a stable, flat surface; Do not exceed max capacity; Center object; Avoid air currents |
| Display shows 'EEEE' or 'O-Ld' | Overload | Remove excess weight immediately to prevent damage |
| Display shows 'Lo' | Low battery | Replace batteries |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 4.33 x 3.35 x 0.79 inches |
| Item Model Number | VT737 |
| Weight Limit | 500 Grams |
| Graduation | 0.01g |
| Batteries | 3 AAA batteries (included) |
| Display Type | LCD with Blue Backlight |
| Manufacturer | Vitafit |
9. Product Applications
The Vitafit Digital Pocket Scale is designed for high-precision weighing across various fields:
- Laboratory: Ideal for precise measurements of chemicals, powders, and small components.
- Kitchen & Food: Perfect for portion control, baking ingredients, spices, and coffee beans.
- Jewelry: Accurately weigh precious metals, gemstones, and small jewelry pieces.
- Hobby & Craft: Useful for weighing small parts, pigments, or other materials requiring exact quantities.
Image: A visual representation of the scale's versatility, showing its application in weighing coffee, kitchen ingredients, fruits, items for hair salons, jewelry, and laboratory samples.
10. Official Product Video
Video: An official demonstration of the Vitafit digital pocket scale, showcasing its features, ease of use, and precision in various scenarios.
11. Warranty and Support
Vitafit is committed to providing high-quality products and customer satisfaction. All Vitafit products are supported by our US customer service center. For specific warranty details, technical assistance, or any inquiries, please refer to the product packaging or visit the official Vitafit website. You can also reach out to our customer service team for support.
Vitafit: Inspired by Life, for Better Life.
