Beats Pill Portable Bluetooth Speaker User Manual

Introduction

This manual provides essential information for the safe and effective use of your Beats Pill Portable Bluetooth Speaker. Please read this manual thoroughly before operating the device.

The Beats Pill is designed to deliver powerful, room-filling sound with up to 24 hours of battery life. It features IP67 dust and water resistance, making it suitable for various environments. It is compatible with both Apple and Android devices, offering seamless connectivity and the ability to pair two speakers for an enhanced audio experience.

Package Contents

Verify that all items are present in your package:

• Beats Pill Portable Bluetooth Speaker
• USB-C Charging Cable
• Quick Start Guide (not included in this digital manual)
• Lanyard (pre-attached or included)

Device Overview

Familiarize yourself with the physical components of your Beats Pill.

Figure 1: Beats Pill Portable Bluetooth Speaker (Champagne Gold) with water droplets, showcasing its water-resistant design.

Controls and Ports:

• Power Button: Located on the side, used for turning the speaker on/off and initiating pairing mode.
• Volume Buttons (+/-): Adjusts audio output level.
• "b" Button (Multi-function Button): Controls playback (play/pause), track skipping, and call management.
• USB-C Port: For charging the speaker and for wired audio connection (lossless audio).
• LED Indicator: Displays battery status and pairing status.

Setup

Charging the Beats Pill

Before first use, fully charge your Beats Pill.

1. Connect the supplied USB-C cable to the USB-C port on the Beats Pill.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer's USB port.
3. The LED indicator will show charging status. A full charge provides up to 24 hours of battery life.

Figure 2: The Beats Pill offers up to 24 hours of battery life on a single charge.

Pairing with a Bluetooth Device

The Beats Pill supports instant one-touch pairing for both Apple and Android devices.

1. Power On: Press and hold the Power button until the LED indicator lights up.
2. Enter Pairing Mode: Press and hold the Power button again for 3 seconds until the LED indicator begins to pulse. The speaker is now discoverable.
3. Connect from Device:
   • For Apple Devices: Bring the Beats Pill close to your unlocked iPhone or iPad. A pop-up will appear on your device's screen. Follow the on-screen instructions to connect.
   • For Android Devices: Go to your device's Bluetooth settings and select "Beats Pill" from the list of available devices.
4. Once paired, the LED indicator will glow solid white.

Figure 3: The Beats Pill is compatible with both Apple and Android devices, supporting charging of external devices via USB-C.

Operating Instructions

Basic Controls

• Power On/Off: Press and hold the Power button for 1 second.
• Play/Pause: Press the "b" button once.
• Skip Forward: Press the "b" button twice.
• Skip Backward: Press the "b" button three times.
• Volume Up: Press the "+" button.
• Volume Down: Press the "-" button.
• Answer/End Call: Press the "b" button once during an incoming call.
• Decline Call: Press and hold the "b" button for 2 seconds during an incoming call.
• Activate Voice Assistant: Press and hold the "b" button for 2 seconds.

Amplify Mode (Pairing Two Beats Pill Speakers)

You can pair two Beats Pill speakers to play audio simultaneously for a louder experience.

1. Ensure both Beats Pill speakers are powered on and not connected to any other device.
2. On the first Beats Pill, press the "b" button and the Power button simultaneously for 3 seconds until you hear a tone.
3. Repeat the same action on the second Beats Pill.
4. The speakers will automatically connect and play audio in Amplify mode.

Figure 4: Sync two Beats Pill speakers for a more immersive audio experience in Amplify or Stereo mode.

Stereo Mode (Pairing Two Beats Pill Speakers)

To achieve a stereo sound experience with two Beats Pill speakers:

1. Follow steps 1-3 for Amplify Mode.
2. Once in Amplify mode, press the "b" button on either speaker once. The speakers will switch to Stereo mode, with one acting as the left channel and the other as the right.
3. To exit Stereo mode, press the "b" button on either speaker once again.

Wired Audio Connection

For high-resolution lossless audio, connect your Beats Pill directly to a compatible device (e.g., laptop) using a USB-C to USB-C cable. The speaker will automatically switch to wired audio input.

Maintenance

Cleaning

To clean your Beats Pill, use a soft, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Do not use abrasive cleaners, alcohol, or chemical solvents.

Water and Dust Resistance

The Beats Pill is IP67-rated for dust and water resistance. This means it can withstand immersion in up to 1 meter of water for 30 minutes. However, it is not permanently waterproof. Always ensure the USB-C port cover is securely closed before exposing the speaker to water or dust.

Figure 5: The Beats Pill is IP67-rated for dust and water resistance, making it durable for outdoor use.

Storage

Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty Information

The Beats Pill Portable Bluetooth Speaker comes with a limited warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Beats website. Keep your proof of purchase for warranty claims.

Support

For further assistance, technical support, or service inquiries, please visit the official Beats support website or contact their customer service.

Online Support: www.beatsbydre.com/support

Product Registration: Register your product online to receive updates and support.