KOFIRE UG-06 Wireless Gaming Headset Instruction Manual

1. Product Overview

The KOFIRE UG-06 Wireless Gaming Headset offers a versatile audio solution for gaming and entertainment across multiple platforms. Featuring 50mm drivers for 3D stereo sound, 2.4GHz wireless and Bluetooth 5.3 connectivity for low-latency performance, and a retractable noise-cancelling microphone, this headset is designed for comfort and extended use. Dynamic RGB lighting enhances the gaming atmosphere.

Figure 1: KOFIRE UG-06 Wireless Gaming Headset

2. What's in the Box

• KOFIRE UG-06 Wireless Gaming Headset
• 0.8m TYPE-C Charging Cable
• 3.5mm Audio Cable
• Foam Mic Cover
• USB Dongle (2.4GHz Wireless Transmitter)
• User Manual

3. Product Features and Controls

The UG-06 headset is equipped with intuitive controls for ease of use during gaming or media consumption.

Figure 2: Headset Controls Layout

• Power ON/OFF Button: Press and hold to power on/off.
• Volume Control Wheel: Adjusts audio output volume.
• Microphone Mute Button: Toggles microphone on/off.
• RGB Light Button: Cycles through or turns off RGB lighting effects.
• Previous Track Button: Skips to the previous audio track.
• Next Track Button: Skips to the next audio track.
• USB-C Charging Port: For charging the headset.
• 3.5mm Audio Jack: For wired connection.
• Retractable Microphone: Can be extended for use or retracted into the earcup when not needed.

4. Setup

4.1 Charging the Headset

Before first use, fully charge the headset. Connect the supplied USB-C charging cable to the headset's USB-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show charging status and turn off when fully charged. A full charge provides up to 65 hours of playback (without RGB lights) or 40 hours in 2.4GHz gaming mode.

4.2 Connecting the Headset

The UG-06 offers three connection modes: 2.4GHz Wireless, Bluetooth 5.3, and 3.5mm Wired.

Figure 3: Multi-Platform Connectivity Options

4.2.1 2.4GHz Wireless Connection (for PS4, PS5, PC, Switch, Mac)

1. Insert the USB dongle into an available USB port on your gaming console (PS4, PS5, Switch) or computer (PC, Mac).
2. Power on the headset by pressing and holding the Power ON/OFF button.
3. The headset will automatically attempt to connect to the USB dongle. A voice prompt will confirm "2.4G mode connected" upon successful pairing.
4. Ensure the headset is selected as the audio output device in your system settings if it doesn't automatically switch.

Figure 4: USB Dongle

4.2.2 Bluetooth 5.3 Connection (for Phone, Tablet, Mac, Switch)

1. Power on the headset.
2. Triple-press the Power ON/OFF button quickly to switch to Bluetooth pairing mode. A voice prompt will indicate "Bluetooth mode" and the indicator light will flash.
3. On your device (phone, tablet, Mac, Switch), go to Bluetooth settings and search for "UG-06".
4. Select "UG-06" to pair. A voice prompt will confirm "Bluetooth connected" upon successful pairing.

4.2.3 3.5mm Wired Connection (for PS4, PS5, PC, Switch, Phone, Tablet)

1. Connect one end of the 3.5mm audio cable to the headset's 3.5mm audio jack.
2. Connect the other end to the 3.5mm audio port on your device.
3. The headset will operate in wired mode, bypassing wireless functions.

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the Power ON/OFF button for approximately 3 seconds until the indicator light illuminates and a voice prompt says "Power On".
• Power Off: Press and hold the Power ON/OFF button for approximately 3 seconds until the indicator light turns off and a voice prompt says "Power Off".

5.2 Volume Control

Use the Volume Control Wheel located on the earcup to adjust the audio volume up or down.

5.3 Microphone Usage

The headset features a retractable noise-cancelling microphone. Pull the microphone out from the earcup for use. Push it back in to retract it when not needed. Use the Microphone Mute Button to quickly mute or unmute your voice.

Figure 5: Retractable Noise-Cancelling Microphone

5.4 RGB Lighting

The headset features dynamic RGB lighting on the earcups. Press the RGB Light Button to cycle through different lighting modes or to turn the lights off. Note that enabling RGB lighting will increase power consumption.

Figure 6: Dynamic RGB Lighting on Earcups

5.5 Mode Switching

To switch between 2.4GHz wireless and Bluetooth modes, triple-press the Power ON/OFF button quickly. A voice prompt will confirm the active mode.

6. Maintenance

• Clean the headset regularly with a soft, dry cloth.
• Avoid exposing the headset to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or repair the headset yourself, as this may void the warranty.
• Store the headset in a cool, dry place when not in use.

7. Troubleshooting

7.1 No Sound

• Ensure the headset is powered on and properly connected (2.4GHz dongle, Bluetooth, or 3.5mm cable).
• Check the volume level on both the headset and your connected device.
• Verify that the headset is selected as the default audio output device in your device's sound settings.
• If using 2.4GHz, ensure the USB dongle is securely inserted and its indicator light is active.
• If using Bluetooth, ensure the headset is paired and connected to your device.

7.2 Microphone Not Working

• Ensure the microphone is extended and not muted (check the Microphone Mute Button).
• Verify that the headset microphone is selected as the input device in your device's sound settings or communication application.
• Check the microphone volume level in your device's settings.

7.3 Connectivity Issues

• 2.4GHz: Ensure the USB dongle is within range and there are no significant obstructions. Try re-pairing by powering off/on the headset and re-inserting the dongle.
• Bluetooth: Ensure the headset is in pairing mode (flashing indicator) and your device's Bluetooth is enabled. Try unpairing and re-pairing the headset.
• Wired: Ensure the 3.5mm cable is fully inserted into both the headset and the device.

8. Specifications

9. Warranty and Support

KOFIRE provides a reliable one-year warranty service for the UG-06 Wireless Gaming Headset. For any product inquiries, technical assistance, or warranty claims, please contact KOFIRE customer support. We are committed to providing excellent customer support to ensure your satisfaction.

10. Product Video