1. Introduction
Thank you for purchasing the W-KING T9-2 Portable Bluetooth Speaker with Wireless Microphone. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not expose the speaker or microphone to extreme temperatures, direct sunlight, or open flames.
- Avoid dropping or subjecting the device to strong impacts.
- Keep the device away from water and liquids. While the speaker has an IPX5 rating, it is not fully submersible.
- Do not attempt to disassemble, repair, or modify the device yourself. Contact qualified service personnel for assistance.
- Use only the provided charging cable and adapter.
- Keep out of reach of children.
- Avoid listening at high volumes for extended periods to prevent hearing damage.
3. Package Contents
Verify that all items are present in your package:
- W-KING T9-2 Portable Bluetooth Speaker
- Wireless Microphone
- USB-C Charging Cable
- 3.5mm AUX Audio Cable
- User Manual (this document)
4. Product Overview
The W-KING T9-2 speaker features dual full-range drivers and a bass reflex tube for powerful audio. It includes a wireless microphone for karaoke and public speaking. The speaker also features vibrant LED lights and multiple connectivity options.
Image: Front view of the W-KING T9-2 speaker, illustrating its two full-range drivers and 80W power output.
Image: The W-KING T9-2 speaker with visual effects representing its 105dB sound output.
Speaker Controls and Ports:
(Refer to the product diagram for exact locations, typically found on the top or rear panel)
- Power Button: Press and hold to turn on/off.
- Volume Up/Next Track: Short press for volume up, long press for next track.
- Volume Down/Previous Track: Short press for volume down, long press for previous track.
- Play/Pause Button: Press to play or pause audio.
- Bluetooth Button: Press to enter Bluetooth pairing mode.
- EQ Button: Press to cycle through EQ modes (e.g., Bass Boost).
- Light Mode Button: Press to change LED light effects.
- TWS Button: Press to initiate True Wireless Stereo pairing.
- USB Port: For USB flash drive playback.
- TF Card Slot: For Micro TF card playback.
- AUX Input: 3.5mm jack for wired audio connection.
- USB-C Charging Port: For charging the speaker.
Microphone Controls:
- Power Button: Press and hold to turn on/off.
- Volume Control: Adjusts microphone volume.
- Reverb Control: Adjusts the reverb effect.
5. Setup
5.1 Charging the Speaker
- Connect the USB-C charging cable to the speaker's USB-C charging port.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. It will turn off or change color when fully charged.
5.2 Charging the Wireless Microphone
- The microphone typically charges via a USB-C port (check microphone for specific port type).
- Connect the charging cable to the microphone and a USB power source.
- The microphone's indicator light will show charging status.
5.3 Powering On/Off
- To Power On: Press and hold the Power button on the speaker for approximately 2-3 seconds until you hear an audible prompt or see the indicator lights illuminate.
- To Power Off: Press and hold the Power button again for approximately 2-3 seconds until the indicator lights turn off.
5.4 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (the Bluetooth indicator light will flash). If not, short press the Bluetooth button.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "W-KING T9-2" from the list of devices.
- Once paired, you will hear a confirmation sound, and the Bluetooth indicator light will remain solid.
Image: Illustration of the W-KING T9-2 speaker's Bluetooth 5.3 connectivity range within a home environment.
5.5 Connecting the Wireless Microphone
- Power on the wireless microphone.
- The microphone should automatically connect to the W-KING T9-2 speaker. A successful connection is usually indicated by a stable light on the microphone.
- If connection fails, ensure both devices are on and within range.
Image: A user demonstrating the wireless microphone in use with the W-KING T9-2 speaker, highlighting its karaoke functionality.
5.6 True Wireless Stereo (TWS) Pairing (Optional)
If you have two W-KING T9-2 speakers, you can pair them for a stereo sound experience:
- Ensure both speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), press the TWS button. It will enter TWS pairing mode.
- The primary speaker will automatically search for and connect to the second speaker.
- Once connected, you will hear a confirmation sound, and the TWS indicator lights on both speakers will be solid.
- Now, connect your device to the primary speaker via Bluetooth as described in section 5.4. Audio will play through both speakers in stereo.
Image: Two W-KING T9-2 speakers shown in a True Wireless Stereo setup, indicating a combined 160W output.
6. Operating Instructions
6.1 Playing Audio
The W-KING T9-2 supports multiple audio input methods:
- Bluetooth: After successful pairing (Section 5.4), play audio from your connected device.
- AUX Input: Connect one end of the 3.5mm AUX cable to your audio source and the other end to the speaker's AUX port. The speaker will automatically switch to AUX mode.
- USB Playback: Insert a USB flash drive containing MP3 audio files into the USB port. The speaker will automatically detect and play the files.
- TF Card Playback: Insert a Micro TF card containing MP3 audio files into the TF card slot. The speaker will automatically detect and play the files.
Image: The W-KING T9-2 speaker highlighting its versatile playback options including Bluetooth 5.3, USB, TF Card, and AUX input.
6.2 Microphone Usage
- Ensure the microphone is powered on and connected to the speaker.
- Adjust the microphone's volume using its dedicated control.
- Adjust the reverb effect using the microphone's reverb control to suit your preference.
6.3 EQ Modes
Press the EQ button on the speaker to cycle through different equalization modes. This allows you to enhance the bass or adjust the sound profile according to your audio content.
6.4 LED Light Modes
Press the Light Mode button on the speaker to change the visual effects of the built-in LED lights. There are typically seven color modes available.
6.5 Volume Control
Adjust the main speaker volume using the Volume Up and Volume Down buttons on the speaker. You can also control the volume from your connected Bluetooth device.
7. Maintenance
7.1 Cleaning
- Wipe the speaker and microphone surfaces with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, benzene, or other chemical solvents, as these may damage the casing.
- Ensure all ports are free of dust and debris.
7.2 Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50% every three months to prolong battery life.
7.3 Battery Care
- The speaker contains a built-in rechargeable battery. Do not attempt to replace it yourself.
- Avoid fully discharging the battery frequently, as this can reduce its lifespan.
- Charge the speaker regularly, even if not in frequent use.
Image: The W-KING T9-2 speaker in an outdoor setting near water, emphasizing its IPX5 rating and long battery life.
8. Troubleshooting
If you encounter issues with your W-KING T9-2 speaker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery; Power button not held long enough. | Charge the speaker fully. Press and hold the Power button for 2-3 seconds. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; Device Bluetooth off; Too far from speaker. | Ensure speaker Bluetooth light is flashing. Turn on Bluetooth on your device. Move device closer to speaker (within 10 meters). Forget "W-KING T9-2" on your device and try pairing again. |
| No sound. | Volume too low; Incorrect input mode; Device not playing audio. | Increase speaker and device volume. Check if the correct input mode (Bluetooth, AUX, USB, TF) is selected. Ensure audio is playing on your source device. |
| Microphone not working. | Microphone off; Low microphone battery; Microphone not paired. | Ensure microphone is powered on and charged. Check microphone volume. Re-pair microphone if necessary. |
| TWS pairing fails. | Speakers already connected to other devices; Speakers too far apart. | Disconnect both speakers from any Bluetooth devices. Ensure both are in TWS pairing mode. Place speakers closer together. |
9. Specifications
| Model Number | T9-2 |
| Brand | W-KING |
| Speaker Maximum Output Power | 80 Watts |
| Connectivity Technology | Bluetooth 5.3, Auxiliary |
| Audio Output Mode | Stereo |
| Mounting Type | Tabletop Mount |
| Enclosure Material | Aluminum |
| Speaker Type | Multimedia |
| Water Resistance | IPX5 |
| Control Method | Buttons, Voice (via connected device) |
| Number of Microphones | 1 (Wireless) |
| Audio Driver Type | Dynamic Driver (Full-Range) |
| Built-In Media | Microphone |
| Power Source | Battery Powered |
| Compatible Devices | Smartphone, Tablet, PC, TV (via AUX) |
10. Warranty and Support
W-KING products typically come with a limited warranty. Please refer to the warranty card included in your package or visit the official W-KING website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or customer service inquiries, please contact W-KING customer support through their official website or the contact information provided with your purchase.
You can visit the W-KING Store on Amazon for more information: W-KING Amazon Store