OXS Storm G2 Wireless Gaming Headset User Manual

1. Introduction

Thank you for choosing the OXS Storm G2 Wireless Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure optimal performance and an immersive audio experience. Please read this manual thoroughly before use.

Image 1.1: The OXS Storm G2 Wireless Gaming Headset, showcasing its design with RGB lighting and the detachable microphone.

2. Package Contents

Verify that all items are present in your package:

• OXS Storm G2 Headset
• 2-in-1 2.4G Wireless Dongle (Type A + Type C)
• 3.5mm AUX Cable
• Detachable Omni-directional Microphone
• Microphone Foam Tip
• Type C Charging Cable
• Headphone Bag
• User Manual (this document)

3. Product Overview

The OXS Storm G2 headset features a 50mm dynamic driver for high-quality audio, multiple connectivity options, and comfortable earcups for extended use.

3.1 Key Features

• 7.1 Virtual Surround Sound: Provides an immersive audio experience.
• Ultra-Low Latency 2.4GHz Wireless: Ensures seamless real-time gaming with less than 25ms latency.
• Bluetooth 5.3: For wireless connection to compatible devices.
• 3.5mm AUX Wired Connection: Universal compatibility.
• Dual Microphones: Detachable omni-directional mic and built-in mic with ENC noise cancellation.
• 3 Preset EQ Modes: Surround, Game, and Music modes for varied audio experiences.
• RGB Lighting: Customizable lighting on earcups.
• Extended Comfort: Protein leather earcups with memory foam padding, lightweight design, and adjustable headband.

Image 3.1: Comfort features of the OXS Storm G2 headset, including adjustable headband and memory foam earcups.

4. Setup Instructions

4.1 Charging the Headset

1. Connect the supplied Type C Charging Cable to the headset's charging port.
2. Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
3. The charging indicator light will illuminate. A full charge takes approximately 4 hours.
4. Note: The headset cannot be used while it is charging.

4.2 Attaching the Microphone

Insert the detachable omni-directional microphone into the designated port on the left earcup until it clicks into place. Ensure the foam tip is securely placed on the microphone for optimal voice clarity.

Image 4.1: The detachable microphone with noise-cancelling technology.

5. Connection Modes

The OXS Storm G2 headset offers three versatile connection options:

Image 5.1: Overview of the three connection modes and compatible devices.

5.1 2.4GHz Wireless Connection

This mode provides ultra-low latency audio for gaming.

1. Plug the 2-in-1 2.4G Wireless Dongle (Type A or Type C) into a compatible port on your PC, laptop, PS4/PS5, Nintendo Switch, or mobile phone.
2. Power on the headset. It will automatically attempt to connect to the dongle.
3. A successful connection is indicated by a stable light on the dongle and headset.

Image 5.2: Demonstrating the ultra-low latency 2.4GHz wireless connection for gaming.

5.2 Bluetooth 5.3 Connection

Ideal for mobile devices, laptops, and Nintendo Switch.

1. Power on the headset.
2. Press and hold the Bluetooth pairing button (refer to headset controls diagram in the physical manual) until the indicator light flashes, indicating pairing mode.
3. On your device, navigate to Bluetooth settings and select "OXS Storm G2" from the list of available devices.
4. Once connected, the indicator light on the headset will become stable.

5.3 3.5mm AUX Wired Connection

For universal compatibility with devices featuring a 3.5mm audio jack, including Xbox consoles.

1. Connect one end of the 3.5mm AUX Cable to the headset's 3.5mm audio port.
2. Connect the other end to the 3.5mm audio jack on your device (e.g., PC, console controller, mobile phone).
3. The headset will automatically switch to wired mode.

Image 5.3: Multi-platform compatibility via 2.4GHz Wireless, Bluetooth, and 3.5mm AUX.

6. Operating Instructions

6.1 Power On/Off

• Power On: Press and hold the Power button for 3 seconds.
• Power Off: Press and hold the Power button for 3 seconds.

6.2 Volume Control

Use the volume roller/buttons located on the earcup to adjust the audio output level.

6.3 EQ Modes

The headset features three preset Equalizer (EQ) modes to optimize your audio experience:

• Surround Mode (7.1 Virtual Surround Sound): Enhances spatial audio for immersive gaming.
• Game Mode: Tuned for gaming audio, emphasizing footsteps and in-game cues.
• Music Mode: Optimized for music playback with balanced audio.

Press the EQ button (refer to headset controls diagram in the physical manual) to cycle through the modes.

Image 6.1: Visual representation of the three preset EQ modes.

6.4 Microphone Usage

• Detachable Mic: Use for clear communication during gaming. Features advanced ENC noise cancellation.
• Built-in Mic: Suitable for daily calls when the detachable mic is not attached. Also features ENC noise cancellation.
• Mute/Unmute: Use the microphone mute button (refer to headset controls diagram in the physical manual) to toggle microphone activity.

6.5 RGB Lighting

The headset features RGB lighting on the earcups. Specific controls for RGB lighting (e.g., on/off, mode change) can be found on the headset (refer to headset controls diagram in the physical manual).

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the headset. Avoid harsh chemicals or abrasive materials.
• Storage: When not in use, store the headset in the provided headphone bag to protect it from dust and damage.
• Battery Care: To prolong battery life, avoid fully discharging the headset frequently. Charge it regularly.

8. Troubleshooting

• No Sound:
  • Ensure the headset is powered on and properly connected (2.4GHz dongle, Bluetooth, or 3.5mm AUX).
  • Check the volume levels on both the headset and your connected device.
  • Verify that the correct audio output device is selected in your device's sound settings.
• Microphone Not Working:
  • Ensure the detachable microphone is securely attached and not muted.
  • Check microphone input settings on your connected device.
  • Test with the built-in microphone if the detachable one is removed.
• Connection Issues:
  • For 2.4GHz wireless, ensure the dongle is firmly plugged in and within range.
  • For Bluetooth, ensure the headset is in pairing mode and your device's Bluetooth is enabled. Try unpairing and re-pairing.
  • For wired connection, ensure the 3.5mm cable is fully inserted into both the headset and the device.
• Headset Does Not Charge or Hold Charge:
  • Ensure the Type C charging cable is connected correctly to a working power source.
  • Important Note: The headset is designed not to operate while charging. This is a safety and battery preservation feature.
  • If battery life is significantly shorter than expected (40H lights off, 24H lights on at 50% volume), contact customer support.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included in your package or visit the official OXS website. You may also contact OXS customer service directly for assistance with product issues or inquiries.