Sapgaks Storage Bed Frame with LED Lighting and USB Charging

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Sapgaks 160x200 cm Storage Bed Frame. This bed frame features integrated LED lighting, USB charging ports (both wired and wireless), and convenient under-bed storage. Please read all instructions carefully before assembly and use to ensure safe and correct operation.

Safety Information

WARNING:

• Ensure the maximum weight capacity of 300 kg (661 lbs) is not exceeded. Overloading can cause damage to the bed frame and potential injury.
• Handle all parts with care during assembly to avoid injuries from sharp angles or edges.
• Although assembly is designed to be straightforward, always follow the instructions carefully. Ensure the structure is stable and secure after assembly before use.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Do not use power tools for assembly unless explicitly instructed, as this may overtighten screws and damage components.

Product Overview and Dimensions

Familiarize yourself with the main components and dimensions of your bed frame.

Image 1: Detailed dimensions of the bed frame. Overall length is 203.5 cm, width is 160 cm, and headboard height is 109 cm. The mattress area is 160x200 cm.

The bed frame includes:

• Upholstered headboard with integrated LED lighting.
• USB charging ports (wired and wireless) on the headboard.
• Hydraulic lift mechanism for under-bed storage access.
• Sturdy slatted frame for mattress support.
• All necessary hardware for assembly.

Assembly Instructions

Assembly is designed to be straightforward. It is recommended that two adults assemble this bed frame. Please ensure all parts are present before beginning.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify all components against the parts list (usually found in the included paper manual).
2. Assemble the Headboard: Attach the headboard sections as per the diagrams. Connect any wiring for the LED lights and USB ports as indicated.
3. Assemble Side Rails and Footboard: Connect the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not overtighten until the frame is fully assembled.
4. Install Slatted Frame: Place the slatted frame onto the support beams within the bed frame. Secure the slats as instructed, ensuring even spacing and firm attachment.
5. Install Storage Mechanism: Attach the hydraulic lift mechanism for the under-bed storage. Follow the specific instructions for this component carefully to ensure proper function and safety. Note: The hydraulic pistons may require the weight of a mattress to fully engage and operate smoothly.
6. Final Tightening: Once the entire frame is assembled, go back and tighten all screws and bolts securely. Do not overtighten.
7. Connect Power: Plug the power adapter for the LED lights and USB charging into a suitable wall outlet.

Image 2: An assembled Sapgaks bed frame, showcasing the headboard with LED lighting and USB charging capabilities.

Operating Instructions

LED Lighting

The integrated LED lighting provides ambient illumination. It can be controlled via the included remote control.

• Power On/Off: Use the power button on the remote to turn the LED lights on or off.
• Color Adjustment: Select from various colors using the color buttons on the remote.
• Brightness Control: Adjust the brightness levels to your preference.
• Mode Selection: Cycle through different lighting modes (e.g., static, fade, flash) if available on your remote.

Image 3: Close-up of the headboard showing the LED lighting, a wired USB port, and a wireless charging pad. The image indicates that the LED colors can be adjusted.

USB Charging Ports

The bed frame is equipped with both wired and wireless USB charging capabilities.

• Wired Charging: Locate the USB-A port on the headboard. Connect your device's USB cable to this port for charging.
• Wireless Charging: Place your compatible device (e.g., smartphone) on the designated wireless charging pad located on the headboard. Ensure the device is centered on the pad for optimal charging. A charging indicator (if present on your device) will confirm charging has begun.

Under-Bed Storage

The bed frame features a hydraulic lift mechanism to access the spacious under-bed storage area.

• Opening: From the foot of the bed, firmly lift the mattress and slatted frame upwards. The hydraulic pistons will assist in lifting and holding the bed base open.
• Closing: Gently push the mattress and slatted frame downwards until it fully closes. Ensure no items are obstructing the closing mechanism.
• Storage Capacity: This area is ideal for storing bedding, seasonal clothing, or other items, helping to keep your room tidy and organized.

Image 4: The bed frame with the mattress lifted, showcasing the large under-bed storage compartment. This area is suitable for storing various household items.

Maintenance

• Cleaning: The polyurethane upholstery is easy to clean. Wipe with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive cleaners.
• Frame Inspection: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
• Slatted Frame: Inspect the wooden slats for any signs of damage or wear. Replace any broken slats to maintain proper mattress support.
• LED and USB: Ensure the power cable for the LED and USB functions is not pinched or damaged. If any electrical components malfunction, discontinue use and contact customer support.

Image 5: Detail of the PU Lychee-pattern material, emphasizing its durable, easy-to-clean, and waterproof properties.

Image 6: A close-up view of the stable slatted bed base, illustrating the construction of the wooden slats and their secure holders.

Troubleshooting

Specifications

Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. If you encounter any issues or require assistance with assembly or operation, please contact Sapgaks customer support through your purchase platform or the official brand website.

Please have your model number (160x200 cm) and purchase date ready when contacting support.