Important Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Keep the inflatable away from all heat sources, including open flames, heaters, and direct sunlight for prolonged periods.
- Ensure proper ventilation around the blower to prevent overheating. Do not obstruct the air intake or exhaust.
- Securely anchor the inflatable using the provided stakes and ropes to prevent it from becoming a projectile in high winds or adverse weather conditions.
- Do not operate the inflatable in extreme weather, such as heavy rain, snow, or strong winds.
- Keep children and pets away from the inflatable during inflation and deflation to prevent entanglement or injury.
- Always unplug the inflatable when not in use or during maintenance.
- Inspect the power cord and plug regularly for any signs of damage. Do not use if damaged.
Package Contents
Verify that all components are present before assembly:
- 1 x 8FT Christmas Inflatable (Snowman, Santa, Gingerbread Man with LED Countdown Clock)
- 1 x Blower (Premium Fan for quick inflation)
- 7 x Ground Stakes
- 3 x Ropes
- 1 x 3m Long Power Cord
- 1 x Instruction Manual (This document)
- 1 x Storage Box

Figure 1: Included components for the Alupssuc Christmas Inflatable.
Setup Instructions
Follow these steps to set up your Alupssuc Christmas Inflatable:
- Unpack: Carefully remove the inflatable and all accessories from the storage box.
- Position: Choose a flat, clear area in your yard or indoor space, free from sharp objects or debris.
- Unfold: Lay the inflatable flat on the ground, ensuring the fabric is spread out and not tangled.
- Secure Zipper: Locate the zipper at the bottom of the inflatable and ensure it is fully closed to prevent air leakage during inflation.
- Connect Blower: Ensure the blower is upright and connected to the inflatable's air intake.
- Power On: Plug the power cord into a suitable outdoor-rated electrical outlet. The inflatable will begin to inflate automatically.
- Anchor: Once fully inflated, use the provided ground stakes to secure the base of the inflatable to the ground. Attach the ropes to the designated loops on the inflatable and secure them to additional stakes in the ground, pulling taut to maintain stability.

Figure 2: Securing the inflatable with ground stakes and ropes.

Figure 3: Visual guide for inflatable setup steps.
Operating Instructions
LED Christmas Countdown Clock
The integrated LED countdown clock allows you to display the remaining days until Christmas. Follow these steps to set the countdown:
- Remove Insulation: Before first use, locate and remove the transparent insulating piece from the countdown clock unit.
- Connect DC Cable: Ensure the DC cable for the countdown clock is properly connected.
- Start Setting: Press the "SET" button for 3 seconds to enter the setting mode. The year (yr) will flash.
- Set Year: Press "+" or "-" to adjust the year.
- Set Month: Press "SET" to switch to the Month (M) interface. Press "+" or "-" to adjust the month.
- Set Day: Press "SET" to switch to the Day (D) interface. Press "+" or "-" to adjust the day.
- Set Hour: Press "SET" to switch to the Hour (H) interface. Press "+" or "-" to adjust the hour.
- Set Minute: Press "SET" to switch to the Minute (Min) interface. Press "+" or "-" to adjust the minute.
- Set Second: Press "SET" to switch to the Second (Sec) interface. Press "+" or "-" to adjust the second.
- Exit Setting: After completing all steps, press the "SET" button to exit the setting mode. The countdown timer (CDT) will flash, indicating the settings are saved and the countdown has started.
The countdown time can be set for up to 98 days (e.g., from September 19th to December 25th).

Figure 4: Instructions for setting the LED Countdown Clock.
Maintenance
- Cleaning: To clean the inflatable, wipe it with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Ensure it is completely dry before storing.
- Storage: Deflate the inflatable completely. Fold it neatly and place it back into its original storage box or a similar protective container. Store in a cool, dry place away from direct sunlight and pests.
- Inspection: Periodically check the fabric for tears or punctures. Small holes can often be repaired with a patch kit (not included). Inspect the blower and power cord for any damage before each use.
- Blower Care: Ensure the blower's air intake is free from debris (leaves, dirt, etc.) to maintain optimal inflation speed and prevent motor strain.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inflatable does not inflate or inflates slowly. |
|
|
| Inflatable sways or falls over. |
|
|
| LED Countdown Clock not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | RH-120-1700U4-1 |
| Brand | Alupssuc |
| Dimensions (Inflated) | Approximately 8 feet wide (2.4 meters) |
| Product Dimensions (Packaged) | 25.8 x 14.8 x 32.8 cm |
| Item Weight | 1.6 kg (3.52 Pounds) |
| Material | Durable Polyester |
| Special Features | LED Christmas Countdown Clock, Internal LED Lights, Integrated Blower |
| Characters | Snowman, Santa, Gingerbread Man |
| Power Cord Length | 3 meters |

Figure 5: Approximate dimensions of the inflatable.
Warranty and Support
Alupssuc is committed to providing high-quality products and customer satisfaction. For any questions, concerns, or support needs regarding your Christmas inflatable, please contact our customer service team.
You can reach us through the "Contact Sellers" option on the platform where you purchased the product. Please provide your order number and a detailed description of the issue for prompt assistance. We aim to resolve all inquiries within 24 hours.
Specific warranty details may vary by region and retailer. Please retain your proof of purchase for warranty claims.