FIDECO Magnetic M.2 2230 NVMe SSD Enclosure User Manual

1. Introduction

This manual provides detailed instructions for the FIDECO Magnetic M.2 2230 NVMe SSD Enclosure. This device allows you to expand storage and transfer data at high speeds between various compatible devices, including iPhone 15 series and above, MacBooks, iPad Pros, and Android devices. Its magnetic design ensures secure attachment to MagSafe-compatible phones.

The enclosure supports M.2 NVMe SSDs of size 2230 (M-Key or M+B Key) and utilizes USB 3.2 Gen 2 for data transfer speeds up to 10Gbps. It is designed for plug-and-play operation across Windows, Mac OS, and Linux operating systems.

Image 1.1: FIDECO Magnetic M.2 2230 NVMe SSD Enclosure.

2. Package Contents

Verify that all items listed below are included in your package:

• 1x FIDECO NVMe SSD Enclosure
• 1x USB-C to USB-C Cable
• 1x Silicone Thermal Pad
• 1x Screwdriver with Screws
• 1x User Manual

Image 2.1: Package contents including the enclosure, cable, thermal pad, screwdriver, and manual.

3. Specifications

Image 3.1: The enclosure supports M.2 NVMe 2230 SSDs (M-Key or M+B Key) only.

4. Setup

4.1. Installing the M.2 SSD

Follow these steps to install your M.2 2230 NVMe SSD into the enclosure:

1. Unscrew the back cover: Use the provided screwdriver to loosen the screws on the back cover and carefully remove the metal lid.
2. Insert the M.2 SSD: Gently insert your M.2 2230 NVMe SSD into the slot. Ensure it is fully seated. Secure the SSD with the small screw provided.
3. Apply the thermal pad: Peel off the protective film from both sides of the silicone thermal pad. Place the thermal pad directly onto the SSD chip. This helps with heat dissipation.
4. Close the enclosure: Place the back cover back onto the enclosure and tighten the screws securely.

Image 4.1: Visual guide for SSD installation.

4.2. Initial Setup and Formatting

After installing the SSD, it may need to be formatted before use, especially if it's new. The recommended file system for broad compatibility with iPhone, Mac, and PC is exFAT.

For Mac:

1. Connect the SSD in its enclosure to your Mac.
2. Open Disk Utility (found in Applications > Utilities).
3. Select the newly connected SSD from the sidebar.
4. Click Erase in the top bar.
5. In the pop-up window, set the Format to exFAT and the Scheme to GUID Partition Map.
6. Click Erase to confirm. This will format the SSD.

For Windows PC:

1. Connect the SSD in its enclosure to your PC.
2. Open File Explorer (Windows Key + E).
3. Locate the newly connected SSD (it might appear as an unformatted drive).
4. Right-click on the drive and select Format....
5. Under File system, select exFAT.
6. Ensure Quick Format is checked and click Start.

5. Operating Instructions

5.1. Connecting to Devices

The FIDECO SSD enclosure is plug-and-play. Simply connect it to your device using the provided USB-C to USB-C cable. No additional drivers or software are required.

• iPhone 15 Series and Above: Connect directly to the iPhone's USB-C port.
• MacBook/iPad Pro: Connect directly to the USB-C port.
• Android Devices: Connect directly to the USB-C port.
• PCs/Laptops/Gaming Consoles: Connect to an available USB-C port.

Image 5.1: The enclosure offers versatile connectivity with multiple devices.

5.2. Magnetic Attachment (for MagSafe-compatible phones)

The enclosure features built-in magnets for secure attachment to iPhone 15 series and newer models with MagSafe functionality. This allows for convenient, hands-free use, reducing the risk of accidental drops or disconnections during use, such as when recording video.

Note: This magnetic feature is only compatible with mobile phones that have magnetic suction functionality (MagSafe or equivalent).

Image 5.2: Magnetic attachment to an iPhone for simultaneous recording and storage.

5.3. Data Transfer

The enclosure supports USB 3.2 Gen 2, providing data transfer speeds up to 10Gbps. This enables rapid transfer of large files, photos, and videos. It also supports UASP, TRIM, and S.M.A.R.T for optimized performance and drive health monitoring.

For optimal speeds, ensure your host device also supports USB 3.2 Gen 2. Older USB standards will result in lower transfer rates.

Image 5.3: High-speed data transfer capabilities.

6. Maintenance

To ensure the longevity and optimal performance of your FIDECO SSD enclosure:

• Cleaning: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or solvents.
• Heat Dissipation: The aluminum casing and included thermal pad are designed for efficient heat dissipation. Ensure the enclosure is not covered or placed in an area with poor airflow during extended use to prevent overheating.
• Storage: When not in use, store the enclosure in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Handle the enclosure with care to avoid physical damage. While the magnetic attachment is secure, avoid unnecessary force or impacts.

7. Troubleshooting

• SSD Not Recognized:
  • Ensure the SSD is correctly installed and secured within the enclosure.
  • Verify the SSD is an M.2 NVMe 2230 (M-Key or M+B Key). SATA SSDs are not compatible.
  • Check the cable connection to both the enclosure and your device. Try a different USB-C port or cable if available.
  • If it's a new SSD, ensure it has been formatted (refer to Section 4.2).
  • Test the enclosure with a different SSD or on another compatible device to isolate the issue.
• Slow Data Transfer Speeds:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps). Older USB standards will limit speed.
  • Verify the cable used is rated for USB 3.2 Gen 2 speeds.
  • Close any unnecessary applications on your device that might be consuming system resources.
  • Ensure the SSD itself is performing optimally.
• Magnetic Attachment Not Strong Enough:
  • Confirm your phone has MagSafe or equivalent magnetic functionality.
  • If using a phone case, ensure it is MagSafe compatible or thin enough not to interfere with the magnetic connection.
  • Clean the magnetic surfaces on both the enclosure and your phone/case to ensure no debris is weakening the connection.

8. Warranty

The FIDECO Magnetic M.2 2230 NVMe SSD Enclosure comes with a one-year limited warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Please retain your proof of purchase for warranty claims.

9. Support

For technical support, warranty claims, or further assistance, please contact FIDECO customer service through the retailer where you purchased the product or visit the official FIDECO website for contact information.

When contacting support, please provide your product model number (API15) and a detailed description of the issue.