1. Introduction
This user manual provides essential information for the safe and efficient operation of your SHEHDS 100W LED Moving Head Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed for professional stage lighting applications, offering a variety of dynamic effects to enhance events.
2. Safety Information
- Electrical Safety: Always connect the device to a grounded power outlet. Ensure the voltage matches the product's specifications. Disconnect power before any service or maintenance.
- Installation: Install the fixture in a well-ventilated area, away from heat sources. Ensure secure mounting using appropriate clamps and safety cables. Avoid direct exposure to rain or moisture.
- Operation: Do not look directly into the light source. Avoid operating the device in extreme temperatures. Keep flammable materials away from the fixture.
- Maintenance: Refer to the maintenance section for cleaning and care instructions. Only qualified personnel should perform repairs.
3. Product Features
- Dynamic Stage Effects: Features 8 colors (7 colors + White) with half-color effect and linear rotation. Includes 7 dynamic and 6 static patterns (gobos).
- 6-Facet Prism: Offers a 6-facet prism effect with linear rotation angle and clockwise rotation for diverse beam patterns.
- Beam Angle: A 16-degree beam angle creates uniform strobe and strong visual effects.
- High Brightness: Equipped with a high-quality LED light source, ensuring a lifespan of over 60,000 hours and efficient optics for maximum brightness.
- Control Modes: Supports DMX512, Master/Slave, Sound Activated, Color Jumping, Stand-alone Strobe, and Auto Running modes.
- Movement: Provides 540° pan and 270° tilt with automated position correction.
- Advanced Functions: RDM remote debugging address, 14 DMX channels, 0-25HZ flash frequency strobe, 0-100% linear dimmer, smart start-stop cooling fan, and linear focus.
4. Product Overview
Figure 4.1: Product Dimensions. This image displays the front and side views of the SHEHDS 100W LED Moving Head Light, highlighting its compact dimensions of approximately 250mm width, 200mm depth, and 350mm height. The control panel is visible at the base.
Figure 4.2: Function Introduction - Control Panel and Interface. This image details the front control panel with its LCD display, status indicator, and menu keys. Below it, the rear interface shows the DMX In/Out ports, Power In/Out, and the main power switch, along with the fuse location.
Figure 4.3: High-Quality Internal Components. An internal view of the moving head light, showcasing key components such as the color wheel, optical lens, motherboard, and motor module. This highlights the robust construction and design for stable and reliable performance.
Figure 4.4: Uniform Beam Angle. This image demonstrates the uniform and strong 16-degree beam angle produced by the light, illustrating its ability to create clear and defined light patterns on a surface.
Figure 4.5: High Saturation Color Wheel and Half-Color Effect. This graphic illustrates the 8-color spectrum (7 colors + white) available, along with the half-color mixing capability and linear rotation, providing a wide range of color options.
Figure 4.6: Prism Effect. This image shows the light projecting multiple, rotating patterns due to the 6-facet prism effect, which includes both linear and clockwise rotation, creating complex and dynamic visual displays.
5. Setup
- Unpacking: Carefully unpack the fixture and inspect it for any damage during transit. Ensure all components listed in the "What's in the Box" section are present.
- Mounting:
- Choose a suitable mounting location that can support the weight of the fixture.
- Use appropriate clamps (e.g., quick lock clamps) to secure the fixture to a truss or other stable structure.
- Always attach a safety cable to the fixture and the mounting structure as a secondary safety measure.
- Power Connection: Connect the power cable to the "POWER IN" port on the fixture and then to a grounded power outlet.
- DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port of the first fixture. For multiple fixtures, daisy-chain them by connecting the "DMX OUT" of one fixture to the "DMX IN" of the next.
- Initial Power On: Flip the main power switch to turn on the fixture. The LCD display will illuminate.
6. Operating Modes
The SHEHDS 100W LED Moving Head Light offers several operating modes to suit various applications:
- DMX512 Mode: This is the most common mode for professional control. Connect the fixture to a DMX controller and set the DMX address using the control panel. Refer to the DMX Channel table for specific functions.
- Master/Slave Mode: Link multiple fixtures together. Set one fixture as the "Master" and the others as "Slave." The slave units will mimic the master's movements and effects.
- Sound Activated Mode: The fixture will react to sound and music, changing patterns and colors in sync with the audio input.
- Auto Running Mode: The fixture will cycle through pre-programmed shows and effects automatically.
- Color Jumping Mode: The fixture will rapidly switch between different colors.
- Stand-alone Strobe Mode: The fixture will operate as a standalone strobe light with adjustable flash frequency.
Use the LCD display and menu keys on the control panel to navigate and select the desired operating mode and adjust settings.
7. DMX Channels
The SHEHDS 100W LED Moving Head Light utilizes 14 DMX channels. Below is a general guide to typical DMX channel assignments. Please refer to the specific DMX chart provided with your product for exact channel functions and values.
| Channel | Function | Description |
|---|---|---|
| 1 | Pan | Horizontal movement (0-540 degrees) |
| 2 | Pan Fine | Fine adjustment for Pan movement |
| 3 | Tilt | Vertical movement (0-270 degrees) |
| 4 | Tilt Fine | Fine adjustment for Tilt movement |
| 5 | Pan/Tilt Speed | Adjust speed of Pan and Tilt movements |
| 6 | Color Wheel | Select colors (7 colors + white, half-colors) |
| 7 | Static Gobo Wheel | Select static gobos (6 patterns + open) |
| 8 | Dynamic Gobo Wheel | Select dynamic gobos (7 patterns + open) |
| 9 | Gobo Rotation | Control rotation of dynamic gobos |
| 10 | Prism | Activate 6-facet prism |
| 11 | Prism Rotation | Control rotation of the prism |
| 12 | Dimmer | Adjust brightness (0-100% linear) |
| 13 | Strobe | Adjust strobe speed (0-25Hz) |
| 14 | Focus | Adjust beam focus (linear) |
8. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS 100W LED Moving Head Light.
- Cleaning:
- Periodically clean the exterior casing with a soft, dry cloth.
- Clean the optical lens and gobos with a soft, lint-free cloth and a mild glass cleaner. Ensure no liquid enters the fixture.
- Keep ventilation openings clear of dust and debris to ensure proper cooling.
- Inspection: Regularly check all mounting hardware, cables, and connections for signs of wear or damage. Replace any damaged parts immediately.
- Software Updates: Check the manufacturer's website for any available firmware or software updates.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not power on | No power supply; Blown fuse; Faulty power cable | Check power connection; Replace fuse; Test/replace power cable |
| No DMX control | Incorrect DMX address; Faulty DMX cable; Incorrect DMX mode | Verify DMX address; Check/replace DMX cable; Ensure DMX mode is selected |
| Light output is dim or inconsistent | Dirty lens/gobo; Overheating; LED issue | Clean lens/gobo; Ensure proper ventilation; Contact support if LED is faulty |
| Movement (Pan/Tilt) is erratic or non-responsive | Motor issue; DMX signal problem; Mechanical obstruction | Check DMX signal; Clear obstructions; Contact support for motor issues |
10. Specifications
| Attribute | Value |
|---|---|
| Model Number | 100w moving light |
| Brand | SHEHDS |
| Light Source Type | Light Emitting Diode |
| Wattage | 100 Watts |
| Light Output Maximum | 40000 Lumens |
| Beam Angle | 16 Degrees |
| Product Dimensions | 9.8"L x 7.8"W x 12.8"H |
| Item Weight | 14.52 pounds |
| Material | Plastic |
| Power Source | Corded Electric |
| Mounting Type | Table Mount (also suitable for truss mounting with clamps) |
| Bulb Features | Color-changing, Prism effect, Lighting effects (Strobe, Patterns, Gobos) |
11. What's in the Box
The product package typically includes the following items:
- SHEHDS 100W LED Moving Head Light (1 unit)
- Power Cable (1 unit)
- DMX Cable (1 unit)
- Quick Lock Clamp (1 unit)
- User Manual (1 unit)
Figure 11.1: Packing List. This image illustrates the typical contents of the product package, showing the main light unit, power cable, DMX cable, quick lock clamp, and the user manual.
12. Product Videos
Watch these official product videos to see the SHEHDS 100W LED Moving Head Light in action and understand its various effects and capabilities.
SHEHDS 100W Gobo Moving Head Light 6 Face Prism Stage Lights
This video demonstrates the various gobo patterns, color changes, and the 6-facet prism effect of the SHEHDS 100W Moving Head Light. It showcases the dynamic capabilities of the fixture in a dark environment.
100W LED Moving Head Lights - Lighting Effects Showcase
This video provides a comprehensive showcase of the lighting effects, including different colors, gobos, and movement sequences, demonstrating the versatility of the 100W LED Moving Head Light in a stage setting.
SHEHDS moving head 100W
This video features the SHEHDS 100W Moving Head Light in a live music venue, demonstrating its performance and visibility alongside other stage lighting. It highlights how the light cuts through other stage effects effectively.
13. Warranty and Support
SHEHDS provides friendly after-sale service and technology support for every customer. For warranty information, technical assistance, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official SHEHDS website.
Note: The product comes with a standard return policy of 30 days for refund/replacement. Protection plans are available for extended coverage (e.g., 3-Year or 4-Year Protection Plan).
