iPormis 7-Piece Extendable Dining Table Set Instruction Manual

1. Product Overview

This manual provides detailed instructions for the assembly, operation, and maintenance of your iPormis 7-Piece Dining Table Set. This set includes one extendable dining table and six chairs, designed for versatility and durability in various home environments.

Image 1.1: The iPormis 7-Piece Extendable Dining Table Set in a typical dining room setup.

2. Package Contents

Your dining table set will be delivered in two separate packages, which may arrive at different times. Please ensure all components are present before beginning assembly.

• 1 x Extendable Dining Table
• 6 x Dining Chairs
• Assembly Hardware (screws, bolts, etc.)
• Detailed Installation Manual (this document)

Image 2.1: Overview of package contents, dimensions, and weight capacities. The table and chairs are shipped in two boxes.

3. Specifications

Image 3.1: Visual representation of product specifications.

4. Assembly Instructions

Assembly is required for both the table and chairs. All necessary hardware and tools are included. Please follow the detailed step-by-step instructions provided in the separate assembly manual for each component. Assembly typically takes less than 45 minutes.

4.1 Chair Assembly

• Identify all chair components: seat, backrest, legs, and hardware.
• Attach the chair legs to the seat using the provided screws and wrench.
• Secure the backrest to the chair frame.
• Ensure all connections are tightened securely.

Image 4.1: Chair details highlighting ergonomic backrest, solid metal frame, anti-bump design, and non-slip foot pads.

4.2 Table Assembly

• Unpack all table components: tabletop sections, frame, and hardware.
• Assemble the main table frame according to the instructions.
• Attach the tabletop sections to the frame, ensuring the extension mechanism is correctly aligned.
• Tighten all fasteners.

Image 4.2: Key features for assembly and design, including easy assembly.

5. Operating Instructions: Extendable Table Feature

The dining table features an extendable design, allowing you to easily adjust its length to accommodate 4 to 6 persons. The extension mechanism is designed for smooth and effortless operation by a single person.

5.1 Extending the Table

• Gently pull the two main tabletop sections apart. The internal sliding mechanism will allow them to separate smoothly.
• Locate the hidden extension leaf within the table frame.
• Lift and position the extension leaf into the gap created between the two main tabletop sections.
• Push the main tabletop sections back together until they meet the extension leaf, ensuring a seamless and snug fit.

5.2 Retracting the Table

• Pull the two main tabletop sections apart slightly.
• Remove the extension leaf and store it securely within the table frame.
• Push the two main tabletop sections back together until they are fully closed.

Image 5.1: The table's extension mechanism, demonstrating smooth sliding and a snug fit when closed.

Image 5.2: The dining table shown in its compact (shrunk) and extended configurations.

6. Maintenance

To ensure the longevity and appearance of your dining set, follow these simple maintenance guidelines:

• Cleaning: The tabletop features a splashproof and scratch-resistant surface. For daily cleaning, simply wipe with a dry cloth. For spills, wipe immediately with a damp cloth and then dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
• Protection: While the surface is durable, using placemats and coasters is recommended to protect against heat, scratches, and spills.
• Frame Care: The metal frame can be wiped clean with a damp cloth.
• Regular Checks: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.

Image 6.1: Features contributing to the durability and ease of maintenance, including waterproof MDF board and reinforced steel structure.

7. Safety Information

Your safety is important. Please observe the following precautions:

• Weight Capacity: Do not exceed the maximum weight capacity of 330 lbs for both the table and each chair.
• Corner Protection: The dining table is equipped with corner protection to minimize the risk of injury from sharp collisions.
• Chair Design: The dining chairs feature an arc design in the backrest for ergonomic support and to protect against sharp edges.
• Stability: Ensure the table and chairs are placed on a flat, stable surface. Do not stand on the table or chairs.
• Assembly: Always follow assembly instructions carefully. Incorrect assembly can lead to instability and potential injury.
• Children: Supervise children around the dining set, especially during table extension or retraction.

8. Space-Saving Features

This dining set is designed with space efficiency in mind. When not in use, the dining chairs can be moved and tucked neatly under the dining table, helping to utilize your space effectively and reduce clutter.

Image 8.1: Illustration of chairs being stored under the table to save space.

9. Troubleshooting

If you encounter any issues with your iPormis dining table set, please refer to the following common solutions:

• Wobbly Table/Chairs: Check all assembly screws and bolts. Tighten any loose fasteners. Ensure the furniture is on a level surface.
• Difficulty Extending/Retracting Table: Ensure the sliding mechanism is clear of obstructions. Apply a small amount of silicone lubricant to the slides if movement is stiff. Do not force the mechanism.
• Missing Parts: If any parts are missing upon delivery, please contact customer support immediately with your product model number and a description of the missing components.

10. Customer Support

For further assistance, warranty information, or to report any issues not covered in this manual, please contact iPormis customer support. Have your product model number (B0D4HNGM1R) ready when contacting support.

You can visit the iPormis Store for more information: iPormis Store