1. Introduction
Thank you for choosing the DYNASONIC DYNAPRO 10 Plus Portable Bluetooth Speaker. This powerful 500W audio system is designed for versatile use, featuring TWS (True Wireless Stereo) technology for pairing two units, Bluetooth connectivity, USB/SD playback, and inputs for microphones and instruments. This manual provides essential information for safe and effective operation of your speaker.
2. Important Safety Information
- Read all instructions before using the product.
- Keep this manual for future reference.
- Do not expose the speaker to water or excessive moisture.
- Do not block any ventilation openings.
- Use only attachments/accessories specified by the manufacturer.
- Protect the power cord from being walked on or pinched.
- Unplug the speaker during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
3. Package Contents
Please check that all items listed below are included in your package:
- DYNASONIC DYNAPRO 10 Plus Bluetooth Speaker
- Wireless Microphone
- Headset Microphone
- Tablet Stand
- Remote Control
- Charging Cable
4. Setup
4.1 Charging the Speaker
Before first use, fully charge the speaker. Connect the provided charging cable to the speaker's charging port and to a suitable power outlet. The charging indicator will show the charging status. A full charge provides approximately 4-5 hours of autonomy.
4.2 Attaching the Tablet Stand
The DYNAPRO 10 Plus includes a tablet stand for convenient placement of your device. Insert the tablet stand into the designated slots on top of the speaker. Ensure it is securely fastened before placing a tablet.
Figure 1: Speaker with tablet stand attached, displaying a tablet.
4.3 Rear Panel Overview
Familiarize yourself with the rear control panel, which provides access to various inputs and audio adjustments.
Figure 2: Rear control panel with power switch, input ports, and audio controls.
- Power Switch: Turns the speaker on or off.
- USB/SD Card Slots: For playing audio files directly from USB drives or SD cards.
- Microphone Inputs: Connect the wireless or headset microphones.
- Instrument Input: For connecting instruments like guitars.
- Audio Controls: Knobs for adjusting Bass, Treble, Echo, and Master Volume.
5. Operating Instructions
5.1 Powering On/Off
To power on the speaker, flip the main power switch located on the rear panel to the "ON" position. To power off, flip the switch to "OFF".
5.2 Bluetooth Pairing
- Turn on the DYNAPRO 10 Plus speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED.
- On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "DYNAPRO 10 Plus" from the list of devices.
- Once paired, the LED indicator will stop flashing and remain solid. You can now play audio from your device through the speaker.
5.3 True Wireless Stereo (TWS) Function
The TWS function allows you to connect two DYNAPRO 10 Plus speakers wirelessly for a stereo sound experience.
- Ensure both DYNAPRO 10 Plus speakers are powered on and not connected to any other Bluetooth device.
- On one of the speakers (this will be the primary speaker), press and hold the TWS button (if available, or follow specific instructions on the speaker's control panel for TWS pairing).
- The primary speaker will search for the secondary speaker. Once connected, you will hear an audible confirmation.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in section 5.2. Audio will play in stereo through both speakers.
5.4 USB/SD Card Playback
Insert a USB flash drive or SD card containing MP3 audio files into the respective slot on the rear panel. The speaker will automatically detect the media and begin playback. Use the control buttons on the speaker or remote control to navigate tracks and adjust volume.
5.5 Microphone and Instrument Use
Connect the wireless or headset microphones to the designated microphone inputs. Connect instruments to the instrument input. Use the "Echo" knob to add vocal effects and the "Bass" and "Treble" knobs to fine-tune the sound. Adjust individual microphone volumes as needed.
Figure 3: Speaker in use during an event, demonstrating its karaoke capabilities.
5.6 Portability
The DYNAPRO 10 Plus is designed for easy transport. It features integrated wheels and an extendable handle, similar to a suitcase, allowing you to move it conveniently for outdoor events, parties, or professional audio setups.
Figure 4: Speaker positioned outdoors, highlighting its robust design and portability for various environments.
6. Maintenance
6.1 Cleaning
Wipe the speaker's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the speaker's openings.
6.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in use for extended periods (e.g., once every 3 months).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery is depleted; Power switch is off. | Charge the speaker; Ensure the power switch is in the "ON" position. |
| No sound | Volume is too low; Incorrect input source selected; Device not paired correctly. | Increase master volume and source volume; Select the correct input mode (Bluetooth, USB, SD); Re-pair Bluetooth device. |
| Bluetooth not connecting | Speaker is too far from device; Speaker is already paired with another device; Bluetooth on device is off. | Move device closer to speaker; Disconnect from other devices; Enable Bluetooth on your device. |
| Microphone not working | Microphone is off; Volume knob for microphone is low; Battery in wireless mic is low. | Ensure microphone is switched on; Increase microphone volume; Replace batteries in wireless microphone. |
8. Specifications
- Model: DYNAPRO 10 PLUS
- Brand: DYNASONIC
- Output Wattage: 500 Watts
- Connectivity Technology: Bluetooth, USB
- Power Source: Battery Powered (1 Lithium-polymer battery included)
- Battery Life: Approximately 4-5 hours
- Dimensions (L x W x H): 50 x 50 x 40 cm (19.7 x 19.7 x 15.7 inches)
- Weight: 8 kg (17.6 lbs)
- Material: Polypropylene (PP)
- Color: Black
- Audio Input: Microphones, Instruments
- Recommended Uses: PA Systems, Sound Reinforcement, Professional Audio Applications, Outdoor Events, Parties
- Country of Origin: China
9. Warranty Information
Specific warranty details for the DYNASONIC DYNAPRO 10 Plus are not provided in this manual. Please refer to the warranty card included with your product or contact DYNASONIC customer support for detailed information regarding warranty coverage and terms.
10. Customer Support
If you encounter any issues or have questions not covered in this manual, please contact DYNASONIC customer support. Contact information can typically be found on the manufacturer's website or on the product packaging.