VINABTY A998

VINABTY A998 Universal AC Remote Control Instruction Manual

Model: A998

1. Introduction

Thank you for choosing the VINABTY A998 Universal AC Remote Control. This remote is designed to operate a wide range of air conditioning units from various manufacturers, offering a convenient replacement or upgrade for your existing remote. This manual provides detailed instructions on how to set up, operate, and maintain your new remote control.

2. Product Overview

The VINABTY A998 remote control is a versatile device compatible with over 5000 different air conditioner models. It features an ergonomic design and a clear LCD display for easy operation.

VINABTY A998 Universal AC Remote Control with LCD screen and various function buttons

Image 1: Front view of the VINABTY A998 Universal AC Remote Control. The remote features a rectangular LCD screen at the top, followed by several circular buttons. Key buttons include 'SET' (yellow), 'TEMP +' and 'TEMP -' (blue), 'TIME.ON', 'CLOCK', 'TIME.OFF' (gray), 'MODE', 'SWING', 'F.SPEED', 'M.WIND' (gray), and a central red power button. The bottom of the remote indicates 'Universal Remote Control A998 5000 in 1'.

Button Functions:

  • Power (Red Button): Turns the air conditioner unit on or off.
  • TEMP + / - (Blue Buttons): Adjusts the temperature setting up or down.
  • SET (Yellow Button): Used for code setting and confirming selections.
  • MODE: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • F.SPEED (Fan Speed): Adjusts the fan speed (e.g., Low, Medium, High, Auto).
  • SWING: Controls the air conditioner's louver swing function.
  • TIME.ON: Sets a timer for the air conditioner to turn on automatically.
  • TIME.OFF: Sets a timer for the air conditioner to turn off automatically.
  • CLOCK: Sets the current time on the remote's display.
  • M.WIND (Manual Wind): Activates or adjusts a manual wind direction feature, if supported by the AC unit.

3. Setup

3.1. Battery Installation

  1. Open the battery compartment cover on the back of the remote control.
  2. Insert two (2) AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
  3. Close the battery compartment cover securely.

Note: If the remote is not used for an extended period, remove the batteries to prevent leakage.

3.2. Code Setting for Your AC Unit

The VINABTY A998 remote can be programmed using either an auto-search method or manual code entry. Refer to the code list provided with your physical remote for specific brand codes.

Auto-Search Method:

  1. Ensure your air conditioner unit is powered on.
  2. Point the remote control towards your AC unit.
  3. Press and hold the SET button for approximately 3-5 seconds until the code on the remote's display starts flashing.
  4. Release the SET button. The remote will now automatically cycle through codes. During this process, the remote will send power signals to your AC unit.
  5. When your AC unit responds (e.g., turns on, off, or makes a sound), immediately press any button (e.g., Power or SET) to stop the auto-search.
  6. Test the remote's functions (Power, Temp, Mode) to ensure it controls your AC unit correctly. If not, repeat the auto-search process.

Manual Code Entry Method:

  1. Locate the brand code for your air conditioner unit in the provided code list (usually a small booklet or sheet included with the remote).
  2. Ensure your air conditioner unit is powered on.
  3. Press and hold the SET button for approximately 3-5 seconds until the code on the remote's display starts flashing.
  4. Use the TEMP + or TEMP - buttons to manually enter the 3-digit code for your AC brand.
  5. Once the correct code is displayed, press the SET button to confirm.
  6. Test the remote's functions (Power, Temp, Mode) to ensure it controls your AC unit correctly. If not, try another code from the list for your brand, or use the auto-search method.

4. Operating Instructions

4.1. Basic Functions

  • Power On/Off: Press the Power (red) button once to turn the AC unit on or off.
  • Temperature Adjustment: Use the TEMP + or TEMP - buttons to increase or decrease the desired temperature.
  • Mode Selection: Press the MODE button repeatedly to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto). The current mode will be displayed on the remote's LCD screen.

4.2. Advanced Functions

  • Fan Speed: Press the F.SPEED button to adjust the fan speed. Options typically include Auto, Low, Medium, and High.
  • Swing Function: Press the SWING button to activate or deactivate the automatic louver swing, which helps distribute air evenly.
  • Timer On (TIME.ON):
    1. Press the TIME.ON button. The time display will flash.
    2. Use TEMP + or TEMP - to set the desired turn-on time.
    3. Press TIME.ON again to confirm.
  • Timer Off (TIME.OFF):
    1. Press the TIME.OFF button. The time display will flash.
    2. Use TEMP + or TEMP - to set the desired turn-off time.
    3. Press TIME.OFF again to confirm.
  • Clock Setting:
    1. Press the CLOCK button. The time display will flash.
    2. Use TEMP + or TEMP - to set the current time.
    3. Press CLOCK again to confirm.
  • Manual Wind (M.WIND): Press the M.WIND button to activate or adjust specific manual wind direction settings, if supported by your AC model.

5. Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace batteries when the remote's display becomes dim or the remote stops responding. Always replace both batteries at the same time with new AAA batteries.
  • Storage: If the remote will not be used for an extended period, remove the batteries to prevent corrosion and store it in a cool, dry place.

6. Troubleshooting

  • Remote not working:
    • Check if batteries are inserted correctly and have sufficient charge. Replace if necessary.
    • Ensure there are no obstructions between the remote and the AC unit's receiver.
    • Verify that the remote is programmed with the correct code for your AC unit. Re-attempt code setting if unsure.
  • AC unit not responding to all commands:
    • Some advanced functions may not be supported by all AC models.
    • Try re-programming the remote with a different code for your AC brand, if available.
  • Display is dim or blank:
    • Replace the batteries with new ones.

7. Specifications

  • Model: A998
  • Compatibility: Over 5000 AC models, including LG, Gree, Midea, Toshiba, Haier, Daikin, Sharp, Panasonic, Samsung, Sanyo, Hisense, Carrier, York, Fujitsu.
  • Power Source: 2 x AAA batteries (not included)
  • Dimensions: 5 x 2 x 0.7 inches (approximately)
  • Weight: 2 ounces (without batteries)

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.