1. Introduction
Thank you for choosing the Bed Bath & Beyond 5-Piece Modern Industrial Dining Set. This set is designed to provide a functional and stylish dining solution for small spaces, featuring a durable metal frame and rustic brown MDF tabletop and chair seats. This manual provides essential information for assembly, safe use, and maintenance to ensure the longevity and enjoyment of your dining set.
Image 1.1: The 5-Piece Modern Industrial Dining Set, showcasing the table and four chairs in a kitchen environment. The set features a rustic brown tabletop and black metal frames.
2. Safety Instructions
- Read all instructions carefully before assembly and use.
- Keep all small parts and packaging materials away from children and pets to prevent choking hazards.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the table or chairs.
- Distribute weight evenly on the table surface.
- Avoid placing hot items directly on the tabletop without protection.
- Use on a flat, stable surface to prevent tipping.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- 1 x Dining Table
- 4 x Dining Chairs
- 1 x Hardware Pack (screws, bolts, Allen wrench, etc.)
- 1 x Assembly Instruction Sheet (this document)
4. Assembly Instructions
Assembly typically requires two adults. Lay out all parts on a soft, clean surface to prevent scratches. Do not fully tighten screws until all components are loosely assembled.
- Unpack Components: Carefully remove all parts from the packaging and identify them against the package contents list.
- Assemble Chairs:
- Attach the chair backrest to the chair frame using the provided hardware.
- Secure the chair seat to the assembled frame.
- Attach any crossbars or support beams to the chair legs.
- Repeat for all four chairs.
- Assemble Table:
- Attach the table legs to the tabletop using the provided hardware.
- Connect any horizontal support bars between the table legs.
- Final Tightening: Once all components are loosely assembled, carefully place the table and chairs upright. Systematically tighten all screws and bolts using the Allen wrench until secure. Do not overtighten.
- Check Stability: Gently shake the table and chairs to ensure they are stable and level. Adjust as needed.
Image 4.1: The assembled dining set, ready for use, featuring a rustic brown tabletop and black metal frames, shown with place settings in a dining room.
5. Usage Guidelines
- Space-Saving Design: The chairs are designed to tuck neatly under the table when not in use, maximizing space in smaller areas.
- Ergonomic Comfort: The chairs feature ergonomic curved backrests for comfortable seating during meals.
- Indoor Use Only: This dining set is intended for indoor use in dining rooms, kitchens, or breakfast nooks.
6. Care and Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Clean spills immediately to prevent staining, especially on the MDF tabletop.
- Protection: Use placemats or coasters to protect the tabletop from heat, moisture, and scratches.
- Hardware Check: Periodically check and re-tighten all screws and bolts to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the materials.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chair is wobbly | Loose hardware; uneven floor. | Ensure all screws and bolts are tightened. Move to a level surface or use furniture pads to stabilize. |
| Parts do not fit together | Incorrect orientation; wrong parts used. | Review assembly instructions carefully. Ensure parts are oriented correctly. Do not force components. |
| Scratches on surface | Rough handling during assembly or use. | Use a soft cloth during assembly. Use placemats/coasters during use. Minor scratches may be touched up with furniture repair pens (not included). |
8. Specifications
- Product Name: 5-Piece Modern Industrial Dining Set
- Brand: Bed Bath & Beyond
- Model Identifier (ASIN): B0D486WHMY
- Materials: Anti-rust powder-coated steel frame, MDF boards
- Components: 1 Dining Table, 4 Dining Chairs
- Features: Space-saving design, ergonomic curved backrests, sturdy build
- Date First Available: May 15, 2024
9. Warranty and Support
For warranty information or customer support, please refer to your purchase documentation or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.
For further assistance, you may visit the Bed Bath & Beyond brand page on Amazon.