Introduction
This manual provides instructions for the VINABTY universal replacement remote control, designed for various Mitsubishi air conditioner models. This infrared remote control requires no programming or complex setup, offering a straightforward replacement for your original unit.
Key Features:
- No Programming Required: Ready to use out of the box.
- Ergonomic Design: Lightweight and comfortable to hold.
- Durable Construction: Made from ABS material for longevity.
- Infrared Technology: Provides reliable transmission up to 10 meters.
Image 1: Front view of the VINABTY Universal Remote Control. This image displays the remote's overall design, including the display screen and primary control buttons for temperature adjustment and power.
Setup
1. Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image 2: Rear view of the remote control with the battery compartment open, showing where to insert two AAA batteries. The protective slide cover is shown detached to the right.
2. Initial Use
Once batteries are installed, the remote is ready for immediate use. Point the remote directly at your Mitsubishi air conditioner unit and press the OFF/ON button to power it on or off.
Operating Instructions
The VINABTY remote control features a sliding cover that reveals additional functions. The primary buttons are always accessible.
Image 3: Full view of the VINABTY Universal Remote Control with the sliding cover retracted, revealing all operational buttons and the LCD screen.
Basic Functions (Cover Closed)
- OFF/ON Button: Powers the air conditioner unit on or off.
- TEMP + / TEMP - Buttons: Adjust the desired temperature setting upwards or downwards.
Advanced Functions (Cover Open)
Slide down the front cover to access additional control options:
- MODE Button: Cycles through operating modes such as Cool, Dry, Fan, and Auto. Note: Some users have reported that the heating mode may not be available or functional on all compatible air conditioner models with this remote.
- FAN Button: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- VANE Button: Controls the vertical airflow direction (louvers).
- WIDE VANE Button: Controls the horizontal airflow direction.
- ECONO COOL Button: Activates the energy-saving cooling mode.
- POWERFUL Button: Initiates rapid cooling or heating (if available).
- i save Button: Recalls a preferred setting.
- TIMER ON / TIMER OFF Buttons: Sets the time for the unit to automatically turn on or off.
- WEEKLY TIMER ON/OFF Button: Activates or deactivates the weekly timer schedule.
- EDIT/SEND Button: Used for confirming timer settings.
- SET Button: Confirms selections or enters setting modes.
- CANCEL Button: Cancels current settings or timer programs.
- DAY Button: Selects the day for weekly timer programming.
- TIME Buttons (Up/Down Arrows): Adjusts the time for timer settings.
- CLOCK Button: Sets the current time on the remote's display.
- RESET Button: Resets the remote control to factory defaults.
- DELETE Button: Deletes programmed timer settings.
Maintenance
Cleaning the Remote Control
To maintain the remote's appearance and functionality:
- Wipe the surface with a soft, dry cloth.
- Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or the display fades. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries or different types of batteries.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Remote not responding |
|
| Air conditioner does not respond to heating mode commands | Some users have reported that this universal remote may not fully support the heating function on all Mitsubishi air conditioner models, even if the original remote did. This remote is primarily designed for cooling functions. If heating is critical, verify compatibility with the manufacturer or consider using the original remote if available. |
| Display is dim or blank | Batteries are low or depleted. Replace with new AAA batteries. |
Specifications
- Brand: VINABTY
- Model Numbers: SG15J, SG15D
- Compatible Devices: Mitsubishi Air Conditioners (various models including MSZ-GE series)
- Connectivity Technology: Infrared
- Color: Black
- Special Feature: Ergonomic design
- Maximum Range: 10 meters
- Number of Buttons: 15 (visible and under cover)
- Power Source: 2 x AAA Batteries (not included)
Compatible Air Conditioner Models:
SG15J, SG15D, MSZ-GE60VA, MSZ-GE71VA, MSZ-GE60VAD, MSZ-GE60VAD-A1, MSZ-GE80VAD, MSZ-GE71VAD, MSZ-GE50VA-A1, MSZ-GE50VAD-A1, MSZ-GE25VAD-A1, MSZ-GE60VA-A1, MSZ-GE22VAD-A1, MSZ-GE35VAD-A1, MSZ-GE80VA-A1, MSZ-GE42VA-A1, MSZ-GE80VA2-A1, MSZ-GE42VAD-A1, MSZ-GE80VAD-A1, MSZ-GE60EA A1/MUZ-GE60EA A1, MSZGE60VA, MSZGE80VA2-A1, MSZGE80VA-A1, MUZGE60VA-A1, E22F28083, MSZ-GE50VA2-A1, MSZ-GE33VA-A1, MSZ-GE25VA-A1, MSZ-GE35VA-A1, MSZ-GE71VA-A1, MSZ-GE35VA2-A1, MSZ-GE71VAD-A1.
Support
If you encounter any issues or have questions regarding the compatibility or functionality of your VINABTY remote control, please contact the seller or manufacturer for assistance. They aim to provide a satisfactory solution within 24 hours.
Note: Specific warranty information is not provided in the product details. Please refer to your purchase documentation or contact the seller for warranty details.
