Product Overview
The FieryRed 2" Hitch Receiver is a Class 3 rear trailer tow hitch designed for specific compatibility with 2019-2024 Dodge Ram 1500 Newbody trucks. It is constructed from heavy-duty alloy steel with an anti-rust gloss powder coat for durability and corrosion resistance. This hitch provides a secure connection point for various towing and hauling accessories.
Image: The FieryRed 2" Hitch Receiver, showcasing its robust construction and black powder-coated finish, ready for installation.
Vehicle Compatibility
This hitch receiver is specifically designed for:
- 2019-2024 Dodge Ram 1500 Newbody
Note: This product is NOT compatible with the Ram 1500 Classic model.
Image: A Dodge Ram 1500 truck with the hitch installed, illustrating its compatibility and potential uses with cargo carriers, bike racks, and weight-distributing hitches.
Specifications
| Feature | Detail |
|---|---|
| Brand | FIERYRED |
| Model Number | RAM19-HITCH-UFA |
| Receiver Size | 2 inches |
| Hitch Class | Class 3 |
| Gross Trailer Weight (GTW) | 6000 LBS |
| Tongue Weight (TW) | 600 LBS |
| Material | Alloy Steel |
| Finish Type | Powder Coated (Anti-Rust Gloss) |
| Item Weight | 6.25 pounds |
| Package Dimensions | 8.46 x 7.72 x 6.69 inches |
Image: Detailed view of the hitch receiver, highlighting its 2-inch opening and specified load capacities of 6000 LBS Gross Trailer Weight and 600 LBS Tongue Weight.
Image: A diagram illustrating the precise dimensions of the hitch receiver and its included components, such as bolts and washers.
Installation (Setup)
The FieryRed 2" Hitch Receiver is designed for a straightforward, direct bolt-on installation without the need for drilling. It perfectly matches the original mounting points of compatible vehicles.
Required Tools:
- Standard wrench set or socket set
- Torque wrench (recommended for proper tightening)
Installation Steps:
- Preparation: Ensure the vehicle is on a level surface and the parking brake is engaged. For safety, consider using jack stands.
- Locate Mounting Points: Identify the existing mounting points on the vehicle's frame where the hitch receiver will attach. These are typically pre-drilled holes.
- Position the Hitch: Carefully lift the hitch receiver into position, aligning its mounting holes with the vehicle's frame holes.
- Insert Bolts: Insert the provided bolts through the aligned holes. Ensure washers are used as specified.
- Hand-Tighten: Hand-tighten all bolts to secure the hitch in place, but do not fully tighten yet.
- Final Tightening: Using appropriate tools, progressively tighten all bolts evenly. Refer to your vehicle's service manual or a professional for specific torque specifications to ensure a secure and safe installation.
- Verify Installation: Double-check all connections to ensure they are tight and the hitch is securely mounted without any wobbling.
Image: A truck towing a boat, illustrating the ease of installation with no drilling required and direct bolt-on attachment to original mounting points.
Image: An infographic highlighting the quick installation time (approximately 30 minutes) and minimal tools required for setting up the hitch receiver.
Video: An official product video demonstrating the installation process and key features of the FieryRed 2" Hitch Receiver for 2019-2024 Dodge Ram 1500 Newbody.
Operation
Once installed, the FieryRed 2" Hitch Receiver provides a secure attachment point for various towing and hauling accessories. Always ensure that the accessory (e.g., ball mount, bike rack, cargo carrier) is properly inserted into the receiver tube and secured with a hitch pin and clip (not included with this product).
Towing Capacity:
- Gross Trailer Weight (GTW): Up to 6000 LBS
- Tongue Weight (TW): Up to 600 LBS
Important: Never exceed the lowest weight rating of any component in your towing system, including the vehicle's rated towing capacity, the hitch receiver's capacity, or the ball mount's capacity. Overloading can lead to serious injury or property damage.
Applications:
The 2-inch receiver opening allows for a wide range of applications, including but not limited to:
- Towing trailers (boats, utility trailers, small campers)
- Attaching bike racks
- Mounting cargo carriers
- Connecting weight distributing hitches
Image: Examples of the hitch receiver's wide application, including towing boats, caravans, carrying bikes, and transporting cargo.
Maintenance
Regular maintenance will ensure the longevity and safe operation of your FieryRed hitch receiver.
- Regular Inspection: Before each use, visually inspect the hitch receiver for any signs of damage, cracks, excessive rust, or loose bolts. Pay close attention to the welds and mounting points.
- Cleaning: Clean the hitch receiver periodically, especially after exposure to harsh weather conditions (salt, snow, mud). Use mild soap and water, then rinse thoroughly.
- Lubrication: Apply a thin layer of grease or anti-corrosion spray to the inside of the receiver tube and any moving parts (if applicable) to prevent rust and ensure smooth insertion of accessories.
- Bolt Tightness: Periodically re-check the tightness of all mounting bolts. Vibrations from driving can cause bolts to loosen over time. Re-torque to manufacturer specifications if necessary.
- Corrosion Protection: The powder coat finish provides excellent corrosion resistance. If any chips or scratches occur, touch up with a rust-inhibiting paint to prevent rust from spreading.
Image: A diagram illustrating the multi-layer coating process (High Quality steel, Special E-Coating, Black Powder Coated) that provides long-lasting corrosion resistance to the hitch receiver.
Troubleshooting
This section addresses common issues you might encounter with your hitch receiver.
Issue: Hitch does not fit the vehicle.
Solution: Verify that your vehicle is a 2019-2024 Dodge Ram 1500 Newbody. This hitch is NOT compatible with the Ram 1500 Classic. Double-check the model year and trim of your truck. Ensure no obstructions are present on the vehicle's frame or bumper that might prevent proper alignment.
Issue: Bolts are difficult to tighten or align.
Solution: Ensure the hitch is correctly aligned with the vehicle's pre-drilled mounting points. Do not force bolts. If alignment is difficult, slightly adjust the hitch's position. Ensure bolts are hand-threaded first to prevent cross-threading before using tools for final tightening. If a bolt is stripped or damaged, replace it with an appropriate grade and size.
Issue: Rust or corrosion appearing on the hitch.
Solution: While the hitch has an anti-rust powder coat, prolonged exposure to harsh elements or physical damage can lead to rust. Clean the affected area thoroughly, remove any loose rust, and apply a rust-inhibiting primer followed by a black automotive paint to match the finish. Regular cleaning and lubrication can prevent this.
Issue: Excessive movement or rattling after installation.
Solution: Re-check the tightness of all mounting bolts. Ensure they are torqued to the vehicle manufacturer's specifications. If the rattling occurs between the hitch receiver and an inserted accessory (e.g., ball mount), a hitch tightener or anti-rattle device may be needed (sold separately).
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please contact FieryRed customer service. Keep your purchase receipt as proof of purchase.
Contact Information:
- Visit the official FieryRed website for contact details and FAQs.
- Refer to the packaging or original purchase documentation for specific warranty terms and conditions.
FieryRed is committed to providing high-quality 4x4 products and customer satisfaction.
