Introduction
This instruction manual provides detailed guidance for assembling your JQARCH Rabbit Micro Building Blocks Set. This set allows you to construct a detailed rabbit figure holding a carrot using 5200 micro-sized building blocks. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

Image: The fully assembled JQARCH Rabbit Micro Building Blocks Set, featuring a white rabbit with pink ears, blue eyes, and a red mouth, holding an orange carrot with green leaves.
Safety Information
- Small Parts Warning: This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
- Keep all building blocks and packaging materials away from infants and young children.
- Do not ingest any parts.
- Adult supervision is recommended during assembly, especially for younger builders.
Package Contents
Upon opening the package, please verify that all components are present:
- Approximately 5200 micro building blocks (various colors and shapes)
- Detailed assembly instructions booklet
If any parts are missing or damaged, please refer to the "Troubleshooting" section for customer support contact information.
Assembly Instructions
The JQARCH Rabbit Micro Building Blocks Set requires careful assembly. Follow the included detailed instructions booklet step-by-step. Patience and attention to detail are key for a successful build.
- Preparation: Find a clean, well-lit, and spacious work surface. Organize the micro blocks by color or shape as suggested in the instruction booklet to facilitate easier identification.
- Follow the Booklet: Refer to the numbered steps and diagrams in the provided instruction booklet. Each step will guide you on which blocks to use and where to place them.
- Secure Connections: Ensure each block is firmly pressed into place to create a stable structure. Micro blocks require precise alignment.
- Patience is Key: Due to the small size and high piece count, assembly can be time-consuming. Take breaks if needed and proceed at your own pace.
- Review Each Step: Before moving to the next step, double-check that the current section matches the diagram in the instruction booklet.

Image: A person holding the assembled rabbit model, demonstrating its size and the intricate detail achieved through micro building blocks. This highlights the need for patience during assembly.

Image: The assembled rabbit building block set being held by a person in an outdoor setting, providing a real-world scale reference for the finished model.
Operating and Display
Once assembled, your JQARCH Rabbit Micro Building Blocks Set is designed for display and gentle interaction.
- Display: Place your finished model on a stable, flat surface. It serves as a decorative item for home or office.
- Handling: Handle the model gently to prevent blocks from detaching. Avoid dropping or applying excessive force.
- Interaction: While durable, the model is not intended for rough play. It is primarily a display piece.

Image: The assembled rabbit model displayed as a decorative item on a desk, showcasing its suitability for home or office decor.
Maintenance
To keep your JQARCH Rabbit Micro Building Blocks Set in optimal condition:
- Cleaning: Use a soft, dry cloth or a small, soft brush to gently remove dust from the model. Avoid using water or chemical cleaners, as these may damage the blocks or cause discoloration.
- Storage: If disassembling for storage, keep all blocks in a sealed container to prevent loss and protect them from dust and moisture.
Troubleshooting
- Missing or Damaged Parts: If you find any missing or damaged blocks upon opening the package, or during assembly, please contact customer support immediately.
- Difficulty with Assembly:
- Double-check the instruction booklet to ensure each step is followed precisely.
- Ensure blocks are oriented correctly and pressed firmly.
- If a section is particularly challenging, try disassembling a small portion and re-attempting.
Specifications
| Model Name | Rabbit 5200pcs |
| Brand | JQARCH |
| Piece Count | Approximately 5200 micro building blocks |
| Approximate Dimensions (Assembled) | Height: 12.6 inches, Width: 9.1 inches, Depth: 4 inches |
| Material | High-quality plastic |
| Recommended Age | Adults and older children (due to small parts and complexity) |

Image: The assembled rabbit model with overlaid measurements, indicating a height of 12.6 inches, width of 9.1 inches, and depth of 4 inches.
Customer Support and Warranty
JQARCH is committed to customer satisfaction. For any installation assistance, missing parts, or product concerns, please contact us directly through Amazon Messaging.
- Contact Method: Use the Amazon Messaging system to reach our customer support team.
- Response Time: We pledge to respond to all inquiries within 24 hours.
- Warranty: While specific warranty details are not provided, our customer support guarantee ensures assistance with product concerns.





