Introduction
Welcome to your Aroepurt Hybrid Case and Tempered Glass Screen Protector for the ZTE 5G UG Phone U23. This manual provides essential information for the proper installation, use, and maintenance of your new phone accessories.
The hybrid case features a durable polycarbonate back panel and a flexible Thermoplastic Polyurethane (TPU) frame with reinforced corners for enhanced drop protection. Its frosted surface helps resist fingerprints, and the design ensures camera and screen protection when placed on flat surfaces.
The included tempered glass screen protector offers additional defense against scratches and impacts, maintaining screen clarity and touch sensitivity.
What's in the Box
- 1 x Aroepurt Hybrid Phone Case (Red)
- 1 x Tempered Glass Screen Protector
Setup
Installing the Tempered Glass Screen Protector
- Clean your phone screen thoroughly using a microfiber cloth to remove all dust, smudges, and fingerprints. Ensure the screen is completely dry.
- Carefully peel off the protective film from the adhesive side of the tempered glass screen protector. Avoid touching the adhesive surface.
- Align the screen protector precisely with your phone's screen, ensuring the cutouts for the camera and sensors match.
- Gently lower the screen protector onto the screen. It will begin to adhere automatically.
- Use a clean cloth or your finger to gently press out any air bubbles towards the edges of the screen.
The screen protector is designed to be scratch-proof, providing robust protection against daily wear and tear. For visual reference, refer to the image demonstrating its durability.
Installing the Phone Case
- Ensure your phone screen is clean and the tempered glass protector (if installed) is securely in place.
- Insert the phone into the flexible TPU frame of the case, starting with one side.
- Gently press the remaining edges of the phone into the case until it is fully seated and all corners are protected.
- Verify that all ports, buttons, and camera cutouts align correctly with the case.
The case is designed with a PC hard back panel and a soft silicone frame, featuring four-corner shock airbags for enhanced drop protection. This design ensures your device is secure at all times.
Operating Features
Folding Stand Function
The integrated folding stand allows for hands-free viewing of your device in both portrait and landscape orientations. This is ideal for watching videos, video calls, or browsing content.
- To activate, pull out the stand from the back of the case. Adjust the angle as desired for comfortable viewing.
- To retract, simply fold the stand back into its recess until it sits flush with the case.
Magnetic Support
The case features a built-in magnetic plate, allowing it to securely attach to compatible magnetic car mounts or other magnetic holders. This provides convenient access to your phone while driving or in other settings.
- Simply place the back of the case onto a magnetic mount.
- Ensure a strong connection before driving or leaving the device unattended.
Wristband/Hand Strap
The integrated wristband provides a secure grip, reducing the risk of accidental drops during one-handed operation. This feature enhances safety and comfort when using your phone on the go.
- Slide your fingers through the strap on the back of the case for a firm hold.
Maintenance
Proper maintenance ensures the longevity and appearance of your phone case and screen protector.
- To clean the phone case, remove it from your device. Wipe with a soft, damp cloth and mild soap if necessary. Rinse thoroughly and allow to air dry completely before reattaching.
- For the tempered glass screen protector, use a microfiber cloth to gently wipe away smudges and fingerprints. Avoid harsh chemical cleaners, which may damage the oleophobic coating.
Troubleshooting
Here are solutions to common issues you might encounter:
- Screen Protector Bubbles: If small bubbles appear after installation, gently press them towards the edges with a soft cloth. For persistent bubbles, carefully lift the nearest edge of the protector slightly and reapply, ensuring no dust is trapped underneath.
- Case Fit Issues: Ensure your phone model is the ZTE 5G UG Phone U23. If the case does not fit correctly, double-check the phone's orientation within the case. If issues persist, verify the product's compatibility with your specific device model.
Specifications
| Brand | Aroepurt |
| Compatible Phone Model | ZTE 5G UG Phone U23 |
| Material | Polycarbonate (PC) back panel, Thermoplastic Polyurethane (TPU) frame |
| Color | Red |
| Form Factor | Hybrid Case |
| Product Dimensions | Approximately 0.39 x 0.39 x 0.39 inches (L x W x H) |
| Item Weight | Approximately 2.46 ounces |
| Special Features | Fingerprint-resistant frosted surface, Folding multi-angle support, Magnetic fastening, Thickened anti-drop corners |
Warranty and Support
Specific warranty information is not provided with this manual. Please refer to the retailer or manufacturer's website for details regarding warranty coverage and customer support policies.
For further assistance or inquiries regarding your Aroepurt Hybrid Case and Tempered Glass Screen Protector, please contact Aroepurt customer service through the platform where the product was purchased. Ensure you have your purchase details readily available for efficient support.