ATTACK SHARK L60 Lightweight Wireless Gaming Headset User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your ATTACK SHARK L60 Lightweight Wireless Gaming Headset. Designed for multi-platform compatibility, the L60 offers versatile connectivity options and high-fidelity audio for an enhanced gaming and listening experience.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x ATTACK SHARK L60 Wireless Headset
• 1 x Detachable Microphone
• 1 x 2-in-1 2.4G Wireless Receiver (USB-A and Type-C)
• 1 x 3.5mm Audio Cable
• 1 x Type-C Charging Cable
• 1 x User Manual (this document)

Image: The ATTACK SHARK L60 headset shown with its detachable microphone, 2-in-1 wireless receiver, and 3.5mm audio cable.

Image: A visual representation of the ATTACK SHARK L60 headset and all its components as they appear in the product packaging.

3. Product Overview

The ATTACK SHARK L60 headset features a lightweight design, multiple connectivity options, and a detachable microphone for versatile use.

3.1 Key Features

• Tri-Mode Connectivity: Supports 2.4G Wireless, Bluetooth 5.0, and Wired (3.5mm audio cable) connections.
• Superior Audio: Equipped with 40mm dynamic drivers for high-fidelity stereo sound, offering crisp highs, rich mids, and clear bass.
• Lightweight Design: Weighing approximately 230g, designed for extended comfort during long usage sessions.
• Detachable Microphone: Features an AI noise-canceling, 120° flexible microphone for clear communication.
• Long Battery Life: Integrated 600mAh battery provides up to 50 hours of wireless use (at 50% volume) and 200 hours of Bluetooth standby.
• Multi-Platform Compatibility: Compatible with PC, Mac, PS4, PS5, Switch, and mobile devices. Wired mode also supports Xbox.

Image: The ATTACK SHARK L60 headset, emphasizing its lightweight construction of 230 grams, designed for comfort.

Image: A detailed view of the headset's transparent outer shell on the ear cups, showcasing internal components.

Image: An exploded view diagram illustrating the 40mm dynamic drivers, responsible for the headset's audio output.

4. Setup and Connectivity

The ATTACK SHARK L60 offers three connection modes: 2.4G Wireless, Bluetooth, and Wired.

4.1 Charging the Headset

Before first use, fully charge the headset using the provided Type-C charging cable. Connect the Type-C end to the headset's charging port and the USB-A end to a power source (e.g., computer USB port, USB wall adapter).

4.2 Detachable Microphone Installation

Insert the detachable microphone into the designated port on the left ear cup until it clicks into place. Ensure it is firmly connected for proper functionality.

Image: A visual guide demonstrating the attachment of the flexible, AI noise-canceling microphone to the headset.

4.3 2.4G Wireless Connection (PC, Mac, PS4, PS5, Switch)

1. Plug the 2-in-1 wireless receiver (USB-A or Type-C, depending on your device) into an available port on your PC, Mac, PS4, PS5, or Nintendo Switch.
2. Power on the headset. The headset will automatically attempt to connect to the receiver. The indicator light on the headset will show a white flashing light during pairing and turn solid white once connected.
3. Ensure the headset is selected as the audio input/output device in your system settings.

Image: The 2.4GHz wireless receiver, featuring both USB-A and Type-C connectors for broad compatibility.

Image: Illustrations demonstrating how to connect the USB dongle to a PC or PS5, and the Type-C dongle to a mobile phone or tablet for 2.4GHz wireless audio.

4.4 Bluetooth Connection (Mobile, Tablet, Mac, Switch)

1. With the headset powered on, press the power button three times quickly to switch to Bluetooth pairing mode. The indicator light will change from white to blue and flash rapidly.
2. On your device (mobile phone, tablet, Mac, or Switch), go to Bluetooth settings and search for available devices.
3. Select "ATTACK SHARK L60" from the list to pair. The indicator light will turn solid blue once connected.

4.5 Wired Connection (PC, Mac, PS4, PS5, Switch, Xbox)

1. Connect one end of the 3.5mm audio cable to the headset's 3.5mm port.
2. Connect the other end to the 3.5mm audio jack on your device (PC, Mac, PS4, PS5, Switch, or Xbox controller).
3. In wired mode, the headset's volume controls may not function, and volume adjustment will need to be done via the connected device.

Image: The ATTACK SHARK L60 headset with icons representing its three connection modes: Bluetooth for Xbox, Switch, PS4/5, 2.4G for Laptop, PC, and Wired for Smartphone.

Image: A diagram showing the 10m/33ft wireless range for both 2.4GHz (compatible with PS4, PS5, PC, Switch) and Bluetooth 5.2 (compatible with Tablet, Mobile), alongside the wired connection for Xbox platforms via a 3.5mm jack.

5. Operating Instructions

5.1 Power On/Off

Press and hold the power button for approximately 3 seconds to power the headset on or off.

5.2 Volume Control

Use the volume up (+) and volume down (-) buttons located on the ear cup to adjust the audio level. Note: Volume control may not function in wired mode.

5.3 Microphone Usage

When the detachable microphone is connected, it will be active for voice communication. To mute the microphone, use the dedicated mute button on the headset or detach the microphone. The AI noise-canceling feature helps reduce background noise for clearer voice pickup.

Image: A person wearing the ATTACK SHARK L60 headset with the microphone attached, engaged in a gaming session.

Image: A person wearing the ATTACK SHARK L60 headset without the microphone, indicating use for music listening.

5.4 Smart Power Saving

In 2.4G wireless mode, the headset will automatically shut down after more than three minutes of static standby to conserve battery life.

Image: A graphic highlighting the headset's 600mAh battery capacity and its capability for up to 50 hours of playtime.

6. Maintenance

To ensure the longevity and optimal performance of your ATTACK SHARK L60 headset, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the headset. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid sharp bends or excessive pulling on the cables to prevent damage.
• Microphone Care: When not in use, detach the microphone and store it safely to prevent bending or damage.

7. Troubleshooting

If you encounter issues with your ATTACK SHARK L60 headset, refer to the following common solutions:

7.1 No Sound or Low Volume

• Check Volume Levels: Ensure the headset's volume is turned up and the volume on your connected device is also adjusted appropriately.
• Verify Connection: For 2.4G wireless or Bluetooth, ensure the headset is properly paired and connected. For wired mode, ensure the 3.5mm cable is fully inserted into both the headset and the device.
• Device Output Settings: Confirm that the ATTACK SHARK L60 is selected as the default audio output device in your computer's or console's sound settings.

7.2 Microphone Not Working

• Microphone Attachment: Ensure the detachable microphone is securely inserted into its port.
• Microphone Mute: Check if the microphone mute function is activated on the headset or your device.
• Device Input Settings: Verify that the ATTACK SHARK L60 microphone is selected as the default audio input device in your system settings.

7.3 Bluetooth Pairing Issues

• Enter Pairing Mode: Ensure the headset is in Bluetooth pairing mode (press the power button three times quickly; the indicator light should flash blue).
• Device Visibility: Make sure your device's Bluetooth is turned on and discoverable.
• Clear Previous Pairings: If you have previously paired the headset with many devices, try removing "ATTACK SHARK L60" from your device's Bluetooth list and attempt to pair again.
• Distance: Ensure the headset is within the 10-meter (33-foot) Bluetooth range of your device.

7.4 Headset Not Powering On

• Charge Battery: The battery may be depleted. Connect the headset to a power source using the Type-C charging cable and allow it to charge for at least 30 minutes before attempting to power it on again.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official ATTACK SHARK website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.