Turtle Beach TBS-5001-05

Turtle Beach Recon 70 Multiplatform Gaming Headset User Manual

Model: TBS-5001-05

1. Introduction

The Turtle Beach Recon 70 Multiplatform Gaming Headset is designed to provide high-quality audio and clear communication across various gaming platforms. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your headset.

This headset features a lightweight design for extended comfort, 40mm speakers for immersive sound, premium noise-isolating ear cushions, and a convenient flip-to-mute microphone. It is compatible with PC, PlayStation (PS5, PS4), Xbox (Xbox Series X|S, Xbox One), and mobile devices via a 3.5mm wired connection.

2. Package Contents

Ensure all items are present in the package:

  • Turtle Beach Recon 70 Gaming Headset
  • PC Splitter Cable
  • User Manual (this document)
  • Turtle Beach Sticker
Turtle Beach Recon 70 headset and PC splitter cable in packaging

Image: Contents of the Turtle Beach Recon 70 headset package, including the headset and PC splitter cable.

3. Setup Instructions

The Recon 70 headset connects directly to your gaming controller or device via a 3.5mm jack. For PC use, a splitter cable is included.

3.1 Connecting to Consoles (PS5, PS4, Xbox Series X|S, Xbox One) & Mobile Devices

  1. Locate the 3.5mm audio jack on your controller or mobile device.
  2. Plug the 3.5mm connector from the Recon 70 headset into the audio jack.
  3. Adjust the volume using the headset's on-ear controls or your device's settings.
Turtle Beach Recon 70 headset connected to a gaming console

Image: The Recon 70 headset connected to a PlayStation 5 console.

Turtle Beach Recon 70 headset connected to a mobile phone

Image: The Recon 70 headset connected to a mobile phone.

3.2 Connecting to PC

  1. Connect the 3.5mm connector from the Recon 70 headset to the PC splitter cable.
  2. Plug the green connector of the PC splitter cable into your computer's headphone jack.
  3. Plug the pink connector of the PC splitter cable into your computer's microphone jack.
  4. Adjust audio settings on your PC as needed.
Turtle Beach Recon 70 headset with PC splitter cable

Image: The Recon 70 headset connected to the included PC splitter cable.

4. Operating Instructions

4.1 Volume Control

The headset features an on-ear volume wheel located on the left earcup. Rotate the wheel up to increase volume and down to decrease volume.

Close-up of the Turtle Beach Recon 70 headset showing the volume control wheel

Image: Detail of the volume control wheel on the left earcup.

4.2 Flip-to-Mute Microphone

The high-sensitivity microphone can be flipped up to mute and flipped down to unmute. Ensure the microphone is fully flipped down for clear communication.

Turtle Beach Recon 70 headset with microphone in the down (unmuted) position

Image: The headset's flip-to-mute microphone in the active position.

Turtle Beach Recon 70 headset with microphone flipped up (muted)

Image: The headset's microphone flipped up, indicating it is muted.

5. Maintenance

To ensure the longevity and optimal performance of your Turtle Beach Recon 70 headset, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe down the headset. For ear cushions, a slightly damp cloth can be used, but avoid excessive moisture. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headset.
  • Cable Care: Avoid sharp bends or kinks in the cable. Do not pull on the cable to disconnect the headset; always grasp the plug.

6. Troubleshooting

If you encounter issues with your Recon 70 headset, try the following solutions:

6.1 No Audio or Low Volume

  • Ensure the 3.5mm jack is fully inserted into your device/controller.
  • Check the headset's volume wheel and ensure it is turned up.
  • Verify your device's audio output settings are configured correctly to use the headset.
  • If using with PC, ensure the PC splitter cable is correctly connected to both headphone and microphone jacks.
  • Test the headset with another device to rule out a device-specific issue.

6.2 Microphone Not Working

  • Ensure the microphone is flipped down to the unmute position.
  • Check your device's microphone input settings to ensure the headset is selected as the input device.
  • If using with PC, confirm the pink connector of the PC splitter cable is securely plugged into the microphone jack.
  • Test the microphone functionality with another application or device.

7. Specifications

FeatureDetail
Model NumberTBS-5001-05
Speakers40mm with Neodymium Magnets
Frequency Response20Hz – 20kHz
Earcup DesignOver-Ear (Closed)
Ear Cushion MaterialSynthetic Leather with Foam Cushioning
Microphone DesignFixed Omni-Directional Flip-to-Mute Microphone
Audio ConnectionWired, 3.5mm jack or PC Splitter Cable
Cable Length2m (6.5ft)
CompatibilityPC, PS5, PS4, Xbox Series X|S, Xbox One, Mobile
Item Weight0.54 lbs (247g)
Dimensions (LxWxH)7.20" x 6.37" x 3.34" (183 x 162 x 85mm)

8. Warranty and Support

For warranty information, technical support, and additional resources, please visit the official Turtle Beach website or contact their customer support directly.

Official Turtle Beach Website: www.turtlebeach.com

9. Product Videos

9.1 Recon 70 PC Video

Video: An official product video from Turtle Beach demonstrating the Recon 70 headset, focusing on its features and compatibility with PC.

9.2 Turtle Beach Recon 70 Headset Product Video

Video: An official product video from Turtle Beach showcasing the various features and design aspects of the Recon 70 headset.