TREKURE 8-in-1 Jump Starter with Air Compressor

1. Introduction

This manual provides essential information for the safe and effective operation of your TREKURE 8-in-1 Jump Starter with Air Compressor. This device is designed to provide emergency vehicle jump-starting, tire inflation, portable power, and illumination. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Precautions

WARNING: Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Read all instructions before using the product.
• Do not operate the unit if it is damaged. Inspect the unit, cables, and clamps before each use.
• Ensure proper ventilation during use. Do not operate in enclosed areas.
• Keep out of reach of children.
• Do not short-circuit the output terminals.
• Connect the clamps to the battery terminals in the correct polarity (red to positive, black to negative).
• Wear eye protection and gloves when operating the device.
• Do not expose the unit to rain or extreme temperatures.
• Disconnect the clamps from the vehicle battery immediately after jump-starting.

Image: The TREKURE Jump Starter highlighting its 10 smart safety protections, indicating no spark and no damage during operation.

3. Package Contents

Verify that all items are present in the package:

• 1 × 6000A Jump Starter with Air Compressor
• 3 × Gas Nozzles
• 1 × Detachable Air Hose
• 1 × Heavy-Duty Jumper Cable with forced start button
• 1 × USB-C Quick Charging Cable
• 1 × EC Cigarette Lighter Adaptor
• 1 × Rugged Carrying Case
• 1 × Instruction Manual (this document)

4. Product Overview

The TREKURE 8-in-1 Jump Starter integrates multiple functionalities into a portable unit. Key features include a powerful jump starter, an air compressor, a power bank, and an emergency flashlight.

Image: The TREKURE 8-in-1 Jump Starter unit shown with its included jumper cables, air hose, and various nozzles.

5. Charging the Device

Before first use, fully charge the jump starter. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

1. Connect the provided USB-C Quick Charging Cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a suitable USB wall adapter (not included) or a car charger.
3. The LCD display will indicate the charging status. The battery icon will show segments filling up, and the percentage will increase until 100% is reached.
4. Once fully charged, disconnect the charging cable.

6. Operating Instructions

6.1. Jump Starting a Vehicle

This device can start 12V vehicles with up to all gas engines or 10L diesel engines.

1. Ensure the jump starter is sufficiently charged.
2. Turn off the vehicle's ignition and all accessories.
3. Connect the red (+) clamp of the jumper cable to the positive (+) terminal of the vehicle's battery.
4. Connect the black (-) clamp of the jumper cable to the negative (-) terminal of the vehicle's battery.
5. Plug the jumper cable connector into the jump starter's EC output port.
6. Observe the indicator on the jumper cable. If it shows green, proceed to start the vehicle. If it shows red or flashes, check connections or press the 'forced start' button on the cable if the battery is completely dead.
7. Start the vehicle's engine.
8. Once the vehicle starts, immediately disconnect the jumper cable from the jump starter, then remove the black (-) clamp, followed by the red (+) clamp from the vehicle battery.

Image: The TREKURE Jump Starter connected to a vehicle battery, illustrating its use for quickly starting a dead vehicle.

6.2. Using the Air Compressor

The integrated air compressor can inflate tires up to 150 PSI and features intelligent preset tire pressure with automatic shutdown.

1. Connect the detachable air hose to the air output port on the jump starter.
2. Attach the air hose nozzle securely to the tire valve stem.
3. Turn on the jump starter. The LCD display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired tire pressure (PSI, KPA, or BAR).
5. Press the power button to start inflation. The compressor will automatically stop once the preset pressure is reached.
6. Disconnect the air hose from the tire valve and the jump starter.

Image: The TREKURE Jump Starter with its air hose connected to a car tire, demonstrating its 150PSI super fast inflator function.

6.3. Using as a Power Bank

The device features a 23,800mAh capacity with dual USB outputs and a 160W EC output for charging various electronic devices.

1. To charge USB devices: Connect your device's USB charging cable to one of the USB output ports on the jump starter. The jump starter will automatically begin charging.
2. To power 12V DC devices: Connect the included EC Cigarette Lighter Adaptor to the jump starter's EC output port, then plug your 12V DC device into the adaptor.

Image: The TREKURE Jump Starter being used as a portable power bank, charging a smartphone via its USB output.

6.4. Using the LED Light

The integrated LED light offers three modes: Flashlight, Strobe, and Orange SOS.

1. Press the light button once to turn on the flashlight mode.
2. Press the light button a second time for strobe mode.
3. Press the light button a third time for orange SOS mode.
4. Press the light button a fourth time to turn off the light.

Image: The TREKURE Jump Starter with its bright LED light activated, demonstrating its 3-in-1 lighting function in a camping scenario.

7. Care and Maintenance

• Clean the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store the jump starter in its rugged carrying case in a cool, dry place away from direct sunlight and moisture.
• Recharge the unit every 3-6 months to prolong battery life, even when not in use.
• Ensure the ports are free from dust and debris.

8. Troubleshooting

9. Technical Specifications

• Model: Beta06
• Peak Amperage: 6000 Amps
• Air Compressor Pressure: 150 PSI
• Battery Capacity: 23,800mAh (Lithium Polymer)
• Start Capability: All Gas / 10L Diesel 12V vehicles
• Product Dimensions: 9.37 x 6.3 x 4.72 inches
• Item Weight: 1.96 pounds
• Light Modes: Flashlight, Strobe, Orange SOS
• USB Outputs: 2 (for charging smartphones, tablets, etc.)
• DC Output: 160W (via EC Cigarette Lighter Adaptor)
• Safety Protections: Short circuit, overheating, overvoltage, overcharging, deep discharge, overcurrent, reverse current, and more.

10. Warranty and Support

TREKURE provides a 2-year hassle-free warranty for this product. Additionally, lifetime technical support is available.

If you encounter any issues or have questions regarding your TREKURE 8-in-1 Jump Starter with Air Compressor, please contact our support team:

• Support Email: support@trekure.com

Please provide your model number (Beta06) and a detailed description of the issue when contacting support for faster assistance.