Introduction
The Creliver EMS Foot Stimulator Pro 2 is an advanced device designed to provide relief and improve circulation in the feet and other body parts. It utilizes both Electrical Muscle Stimulation (EMS) and Transcutaneous Electrical Nerve Stimulation (TENS) technologies. This manual provides essential information for safe and effective use of your device.
Image: The Creliver EMS Foot Stimulator Pro 2, showing the main unit, remote control, and included TENS electrode pads.
Important Safety Information
WARNING:
- Do not use on people with pacemakers, implantable defibrillators, or other implanted electronic devices.
- Do not use on cancer sites because of the possibility of spreading cancer cells by enhancing blood circulation.
- Do not use in patients with heart disease, heart failure, or arrhythmia.
- Do not use in pregnant women.
- Do not use in patients being treated for Deep Vein Thrombosis ("DVT").
- Do not use TENS Pads on open wounds or at sites of rash or inflammation.
- If you don't feel much stimulation, it's likely that you haven't cranked up the level high enough.
- This product is designed for long-term use (about 2-3 months) to see results. Consistent use for about 2 months (1 time per day for 25 minutes) is recommended.
Image: Visual warnings indicating contraindications for use, including heart disease, pregnancy, implanted devices, and use by children.
Product Components
The Creliver EMS Foot Stimulator Pro 2 package includes:
- Creliver EMS Foot Stimulator Main Unit
- Remote Control
- 8 TENS Electrode Pads
- Connection Cables for TENS Pads
- Power Adapter
- User Manual
Image: All components included in the product package, laid out neatly: the foot stimulator, remote, TENS pads, cables, power adapter, and user manual.
Setup
- Unpack: Carefully remove all components from the packaging.
- Power Connection: Connect the power adapter to the main unit and plug it into a suitable electrical outlet.
- Placement: Place the foot stimulator on a flat, stable surface where you can comfortably sit and place your bare feet on the footpads.
- TENS Pad Connection (Optional): If using the TENS pads, connect them to the designated ports on the main unit using the provided cables. Apply the pads to clean, dry skin on the desired body areas.
Image: A user demonstrating the use of the TENS pads connected to the foot stimulator, applied to their back for pain relief.
Operating Instructions
Basic Operation
- Power On: Press the power button on the main unit or the remote control to turn on the device. The LCD display will illuminate.
- Foot Placement: Place your bare feet firmly on the footpads of the device. Ensure full contact for optimal stimulation.
- Mode Selection: Use the "MODE" button on the remote or main unit to cycle through the 25 available modes (7 EMS modes and 18 TENS modes).
- Intensity Adjustment: Use the "+" and "-" buttons for "FOOT LEVEL" to adjust the stimulation intensity for your feet (1-99 levels). For TENS pads, use the "+" and "-" buttons for "BODY LEVEL". Start with a low intensity and gradually increase until you feel a comfortable, yet effective, stimulation.
- Session Duration: The device has a default session duration of 25 minutes.
- Power Off: Press the power button again to turn off the device after your session.
Image: A detailed view of the device's display screen, showing mode and intensity settings, along with the control buttons.
Understanding Modes and Levels
The device offers a wide range of stimulation options to cater to individual needs.
- EMS Modes (7): Focus on muscle contraction to improve muscle performance and blood circulation.
- TENS Modes (18): Aim to block pain signals and release endorphins for pain relief.
- Intensity Levels (1-99): Allow for precise control over the strength of the electrical pulses. Higher numbers indicate stronger stimulation.
Image: A graphic representation of the 25 modes and 99 intensity levels, showing various massage techniques like massage, kneading, Tuina, and Shiatsu.
Maintenance
- Cleaning: Wipe the main unit and footpads with a soft, damp cloth after each use. Do not use abrasive cleaners or immerse the device in water.
- TENS Pads: Replace TENS pads when they lose their adhesiveness or become dirty. Store unused pads in their sealed bag.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep it out of reach of children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No stimulation felt. | Intensity level is too low; poor foot contact; TENS pads not properly applied or worn out. | Increase intensity level gradually. Ensure bare feet are fully on the footpads. Check TENS pad connection and replace if necessary. |
| Device does not power on. | Not plugged in; power adapter faulty. | Check power connection. Try a different outlet. Contact customer support if issue persists. |
| Remote control not working. | Batteries low or depleted; obstruction between remote and unit. | Replace remote control batteries. Ensure no obstructions and point remote directly at the unit. |
Specifications
- Product Dimensions: 17.3 x 6.6 x 17.7 inches
- Weight: 6.65 Pounds
- Power Source: AC Powered
- Material: Polypropylene
- Brand: Creliver
- Model: Pro 2
- Modes: 25 (7 EMS, 18 TENS)
- Intensity Levels: 99
- Default Session Time: 25 minutes
Warranty and Support
Creliver products are designed for quality and reliability. For any issues or questions regarding your EMS Foot Stimulator Pro 2, please contact Creliver customer service.
Our customer service team is available 24/7 to help you solve any problems. We can offer you refund or new replacement if you need it.
For support, please visit the official Creliver website or refer to the contact information provided in your product packaging.
This product is FSA/HSA eligible.
Image: A medical professional endorsing the product, highlighting its benefits and eligibility for FSA/HSA.