Introduction
This manual provides essential instructions for the proper use and care of your Lorus Woman Analogue Quartz Watch, model RJ270BX9. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.

Image: Lorus Woman Analogue Quartz Watch RJ270BX9. This watch features a silver stainless-steel case and bracelet with gold-tone accents on the bezel and central links. The dial is mother-of-pearl with gold-tone hour markers and hands. The Lorus logo is prominently displayed below the 12 o'clock marker.
Setup
1. Setting the Time
- Pull out the crown: Gently pull the crown (the small knob on the side of the watch case) out to the first click position.
- Adjust the time: Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Push in the crown: Once the time is set, push the crown back into its normal position.
2. Adjusting the Bracelet
The stainless-steel bracelet may require adjustment for a comfortable fit. This typically involves removing or adding links. It is recommended to have this procedure performed by a qualified jeweler or watch technician to prevent damage to the bracelet or watch.
Operating the Watch
Your Lorus RJ270BX9 watch is an analogue quartz timepiece designed for reliable timekeeping. It operates on a battery and features a simple, elegant display.
- Time Display: The watch displays hours, minutes, and seconds via three central hands.
- Quartz Movement: The quartz movement ensures accurate timekeeping with minimal deviation.
Maintenance
1. Cleaning
To maintain the appearance of your watch:
- Wipe the case and bracelet periodically with a soft, dry cloth.
- For stainless-steel components, a slightly damp cloth can be used, followed by drying with a soft, dry cloth.
- Avoid using harsh chemicals, solvents, or abrasive cleaning materials.
2. Battery Replacement
The watch is powered by a product-specific battery. When the battery runs low, the watch may stop or the second hand may move erratically. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
3. Water Resistance
This watch is rated for 5 BAR (50 meters) water resistance. This means it is suitable for everyday use, showering, and swimming in shallow water. However, it is not suitable for diving or prolonged submersion. Avoid operating the crown or pushers when the watch is wet to prevent water ingress.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or runs intermittently. | Battery is depleted. | Replace the battery. Consult a professional watch technician. |
| Time is incorrect. | Time was not set correctly or crown was accidentally pulled out. | Reset the time as described in the "Setting the Time" section. Ensure the crown is fully pushed in. |
| Condensation inside the watch. | Exposure to extreme temperature changes or water ingress. | Immediately take the watch to a qualified watch technician for inspection and repair to prevent internal damage. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Lorus |
| Model Number | RJ270BX9 |
| Movement | Quartz |
| Case Material | Stainless-steel |
| Case Diameter | 28mm |
| Dial Color | Mother-of-pearl |
| Strap Material | Stainless-steel |
| Water Resistance | 5 BAR (50 meters) |
| Battery | 1 Product Specific battery (included) |
| Item Weight | 400 g |
Warranty and Support
Lorus watches are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Lorus website. For technical support or service, please contact an authorized Lorus service center.
Note: Unauthorized repairs or modifications may void your warranty.





