1. Introduction and Safety Information
This manual provides essential instructions for the safe installation, operation, and maintenance of your KAFF ALBURY DC 60 Kitchen Chimney. Please read this manual thoroughly before using the appliance and retain it for future reference.
Important Safety Instructions:
- Ensure the power supply matches the voltage specified on the rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the oil collector properly installed.
- Regular cleaning is crucial to prevent fire hazards from grease accumulation.
- Keep children away from the appliance during operation and cleaning.
- Do not flambé under the range hood.
- Ensure adequate ventilation in the room when the chimney is used simultaneously with gas or other fuel-burning appliances.
2. Product Overview
The KAFF ALBURY DC 60 is a 60 CM slant kitchen chimney designed for efficient smoke and odor extraction. It features a powerful BLDC motor, filter-less technology, and smart auto-clean functionality for enhanced performance and ease of maintenance.
Key Features:
- BLDC Motor: Offers superior performance, durability, and lower power consumption.
- Filter-less Design: Eliminates the need for traditional filters, simplifying cleaning.
- Dry Heat Auto Clean Technology: Automatically cleans internal components with a single touch, collecting oil in a dedicated tray.
- 1280 m³/hr Suction Capacity: Ensures effective removal of cooking fumes.
- Touch with 9 Speed Gesture Control: Provides intuitive and precise control over suction levels.
- Intuitive Display Panel: For clear indication of settings and operational status.
- Energy Saving Frosted LED: Illuminates the cooking area efficiently.
Components Included:
- 1x KAFF ALBURY DC 60 Slant Kitchen Chimney (60 CM)
- 1x Kitchen Chimney Exhaust Duct Pipe
- 1x User Manual/Warranty Card
- 1x Wall Mounting Bracket
- Screws and Rawl Plugs for installation
Figure 2.1: Front view of the KAFF ALBURY DC 60 Kitchen Chimney, showcasing its sleek black design and control panel.
Figure 2.2: Side view of the KAFF ALBURY DC 60 Kitchen Chimney, illustrating its slant design.
3. Installation Guide
The KAFF ALBURY DC 60 is a wall-mounted chimney. Proper installation is crucial for optimal performance and safety. It is highly recommended that installation be carried out by a certified professional.
Pre-Installation Checklist:
- Verify all components are present and undamaged.
- Ensure the wall structure can support the chimney's weight (approximately 15 kg).
- Confirm availability of a suitable power outlet (220V) within reach.
- Plan the ducting route to the exterior, minimizing bends for efficient airflow.
- Maintain the recommended distance between the cooking surface and the chimney (refer to local safety standards, typically 65-75 cm).
Installation Steps (Summary):
- Mark the drilling points on the wall according to the mounting bracket template.
- Drill holes and insert rawl plugs.
- Secure the wall mounting bracket firmly using the provided screws.
- Carefully lift and mount the chimney onto the bracket.
- Connect the exhaust duct pipe to the chimney outlet and route it to the exterior.
- Ensure all electrical connections are secure and grounded.
- Install the oil collector tray.
Figure 3.1: Front view of the chimney, illustrating the overall structure for mounting reference.
Figure 3.2: Back view of the chimney, showing the exhaust outlet for duct pipe connection.
4. Operating Instructions
The KAFF ALBURY DC 60 features an intuitive touch control panel and gesture control for easy operation.
Control Panel Functions:
Figure 4.1: Detailed view of the control panel, showing touch buttons and display.
- Power Button (ⓘ): Press to turn the chimney ON/OFF.
- Speed Control (⌃ / ⌄): Adjust suction speed from 1 to 9 levels. Use the up/down arrows or gesture control.
- Light Button (💡): Turn the LED cooking light ON/OFF.
- Auto Clean Button (♻): Initiate the Dry Heat Auto Clean cycle.
- Timer Button (⏱): Set a timer for automatic shutdown.
Gesture Control:
Wave your hand in front of the sensor to control basic functions like power ON/OFF and speed adjustment without touching the panel. Refer to the display for current settings.
Auto Clean Function:
Press the Auto Clean button to activate the dry heat cleaning cycle. The chimney will heat its internal components to melt accumulated oil, which then drains into the oil collector. This process typically takes a few minutes. Ensure the oil collector is empty before starting the cycle.
5. Maintenance and Cleaning
Regular maintenance ensures the longevity and efficient operation of your chimney. Always disconnect power before cleaning.
Oil Collector Cleaning:
- The oil collector should be emptied and cleaned regularly, depending on cooking frequency.
- Carefully remove the oil collector tray from its housing.
- Dispose of collected oil responsibly.
- Wash the tray with warm, soapy water. Rinse thoroughly and dry completely before reinserting.
Exterior Cleaning:
- Wipe the exterior surfaces with a soft cloth dampened with mild detergent.
- Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- For stainless steel parts, use a specialized stainless steel cleaner.
Internal Cleaning (Auto Clean):
- Utilize the Dry Heat Auto Clean function as described in the operating instructions.
- This feature significantly reduces manual internal cleaning requirements.
6. Troubleshooting Guide
Before contacting customer service, please refer to the following common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn ON. | No power supply. | Check power cord connection and circuit breaker. |
| Low suction power. | Oil collector full or dirty. Obstruction in ducting. | Empty and clean oil collector. Check ducting for blockages. |
| Unusual noise during operation. | Loose components. Foreign object in fan. | Ensure all parts are securely fastened. Disconnect power and inspect fan area (if safe to do so). Contact service if persistent. |
| Auto Clean function not working. | System error. | Restart the chimney. If the issue persists, contact customer support. |
7. Product Specifications
Detailed technical specifications for the KAFF ALBURY DC 60 Kitchen Chimney.
| Feature | Specification |
|---|---|
| Model | ALBURY DC 60 |
| Air Flow Capacity | 1280 m³/hr (Cubic Meters Per Hour) |
| Material | Stainless Steel |
| Noise Level | 54 Decibels |
| Mounting Type | Wall Mount |
| Controls Type | Touch, Gesture Control |
| Voltage | 220 Volts |
| Number of Speeds | 9 |
| Item Weight | 15 kg (15000 Grams) |
| Light Source Type | LED |
| Wattage | 220 Watts |
| Annual Energy Consumption | 20 Kilowatt Hours |
| Special Features | Auto Clean, BLDC Motor, Built-In Oil Collector, Energy Saving Frosted LED, Smart Auto Clean Feature |
| Product Dimensions (LxWxH) | 60 x 50 x 64 Centimeters |
| Color | Black |
8. Warranty and Customer Support
Warranty Information:
Your KAFF ALBURY DC 60 Kitchen Chimney comes with a 2 Years Comprehensive Warranty on the Product and a 7 Years Warranty on the Motor from the date of purchase. Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions.
Customer Support:
For any queries, technical assistance, or warranty claims, please contact KAFF Customer Care:
- Manufacturer: Kaff Appliances (I) Pvt. Ltd.
- Toll-Free Customer Care: 1800180222
- Email: customercare@kaff.in
When contacting support, please have your product model (ALBURY DC 60) and purchase details ready.