Barrina 9FT x 5FT 5568 Remote Series LED Linear Light Rectangular Set Instruction Manual

1. Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Barrina 9FT x 5FT 5568 Remote Series LED Linear Light Rectangular Set, 2nd-Generation. Please read carefully before use.

Key Features:

• 2nd-Generation 5568 Remote Series: Compatible only with the same 2nd-Generation 5568 Remote Series office lights. Not compatible with Old Generation 5568 Remote Light Series, 5568-0-10V Series, or other 5568/5566 Series linear light fixtures.
• Remote Control: Adjust color temperature (3000K-6000K), brightness (0%-100%), and utilize night mode. Features three lighting groups (A, B, C) and a memory function.
• Linkable Design: Seamless connection allows linking up to 9 pieces of 4-foot lights and 4 L-shaped connectors in a series.
• Two Mounting Options: Can be ceiling or pendant mounted. Adjustable hanging chain length from 0" to 59".
• High Performance: Emits 30600 lumens with 306W power consumption and a 120° illumination angle.

2. Safety Information

• Always disconnect power before installation, maintenance, or cleaning.
• Ensure proper grounding to prevent electrical shock.
• Installation should be performed by a qualified electrician if you are unsure.
• Do not modify the product in any way not specified in this manual.
• Keep away from water and moisture. This product is not water resistant.
• Ensure the mounting surface can support the weight of the fixture.

3. What's in the Box

• LED Linear Light Fixture Components (e.g., 4-foot light sections, L-shaped connectors)
• Remote Control
• Mounting Clips
• Instruction Manual
• Light Kit (including necessary wiring and connectors)

Note: The exact number of components may vary based on the specific set purchased.

Image: Overview of included components for the Barrina 5568 Remote Series LED Linear Light.

4. Setup and Installation

The Barrina 5568 Remote Series LED Linear Light offers both hanging (pendant) and ceiling mounting options. Ensure you have the correct tools and follow all safety guidelines.

4.1 Important Compatibility Note

This 2nd-Generation 5568 Remote Series is only compatible with other 2nd-Generation 5568 Remote Series lights. Using incompatible series may cause damage or malfunction.

4.2 Connector Identification

Each connector (L-shaped) will have a Version A or Version B sticker on the back for easy identification:

• Version A connectors: Conduct electricity on both ends.
• Version B connector: Conduct electricity on only one end.

To avoid circuit damage: When connecting lights in a rectangular or closed-loop shape, at least one Version B connector must be used. Using only Version A connectors may cause the lights to short-circuit or burn out.

4.3 Hanging Installation

Follow these steps for pendant mounting:

1. Determine the desired hoisting area (e.g., 56.46 x 103.27 inches for the 9FT x 5FT set).
2. Use a percussion drill to make 35mm holes at the marked points on the ceiling.
3. Insert the anchors and secure the hanging hardware.
4. Adjust the chain height by holding the button on the cable gripper.
5. Remove the PC cover and end caps from the light sections.
6. Align the grooves and push the locking splices in to connect the light sections. Ensure tight connections without gaps or looseness. Secure with screws.
7. Connect the wiring (Black/Brown = Live wire, White/Blue = Neutral wire, Green/Yellow = Earth wire). If lights are connected in series, only one fixture needs to be powered.
8. Install the PC covers starting from the middle of each section.

Image: Detail of the seamless connection for Barrina linear lights.

Image: Visual guide to seamless connection, linking, installation options, and adjustable hanging height.

4.4 Ceiling Mounting

Follow these steps for direct ceiling mounting:

1. Draw a mounting area (e.g., 56.46 x 103.27 inches) and mark the installation position for each Ceiling Mounting Bracket.
2. Use a percussion drill to make 35mm holes at the marked points.
3. Screw the bracket to the ceiling and turn it to the "unlock" position.
4. Secure the light into the brackets.
5. Hold the light and turn the brackets to the "lock" position.
6. Connect the wiring (Black/Brown = Live wire, White/Blue = Neutral wire, Green/Yellow = Earth wire). If lights are connected in series, only one fixture needs to be powered.
7. Install the PC covers starting from the middle of each section.

Image: Step-by-step guide for ceiling mounting the light fixture.

5. Operating Instructions

5.1 Remote Control Overview

The remote control allows for comprehensive management of your linear light fixtures. Familiarize yourself with the button functions:

• ON/OFF: Power the lights on or off.
• Dimmer +/-: Adjust brightness levels.
• Color Variator K-/K+: Adjust color temperature.
• Memory Function (Checkmark icon): Long press for 5 seconds to save current settings.
• Color Change (Cycle icon): Switch between 3000K, 4000K, and 6000K.
• Night Light (Moon icon): Activates a soft light mode (4000K at 10% brightness).
• Series A/B/C: Group control buttons.

Image: Remote control layout and button functions.

5.2 Grouping Operations

You can group and control lights based on your preferences, with a maximum of three groups (A, B, C).

1. Turn off the lights you wish to group via the wall switch.
2. Press and hold the desired group button (A, B, or C) on the remote.
3. Turn on the lights via the wall switch.
4. When the lights stop flashing (after approximately 5 seconds), it indicates successful grouping. Release the group button.
5. To control a specific group, press its corresponding button (A, B, or C) on the remote. At this time, color temperature, brightness, and memory functions will only affect the selected group.
6. To control all lights simultaneously, press the ON/OFF button on the remote.

5.3 Memory Function

The memory function allows you to save your preferred light settings (brightness and color temperature).

1. Adjust the light mode to your desired brightness and color temperature.
2. Press and hold the Memory Function button (checkmark icon) for more than 5 seconds until the light flashes once. This indicates the current state has been saved.
3. The remote control can only memorize the mode of the latest operation.
4. When you press the Memory Function button next time, the light will switch to the previously set light mode.

5.4 Color Temperature and Brightness Adjustment

• Use the K- and K+ buttons to fine-tune the color temperature between 3000K (warm white) and 6000K (cool white).
• Use the Dimmer +/- buttons to adjust the brightness from 0% to 100%. Long press for stepless dimming.
• Press the Color Change button (cycle icon) to quickly switch between 3000K, 4000K, and 6000K. Regardless of the current brightness, pressing this button once will set the brightness to 100%. Wait for more than 2 seconds between each press to avoid confusion in color temperature.

Image: Demonstrates adjustable color temperature from 3000K to 6000K.

Image: Illustrates the 0%-100% dimmable feature of the light.

5.5 Clear Connection Between Remote and Lights

Under normal circumstances, there is no need to clear the connection between the lights and the remote control. However, if you need to reset the connection:

1. Turn off the lights via the wall switch.
2. Keep pressing the ON button on the remote.
3. Turn on the lights via the wall switch.
4. The light will change color automatically.
5. Stop pressing the ON button. The light is now disconnected from the remote.
6. To use the remote to control the lights again, perform the grouping operation (Section 5.2) first.

6. Maintenance

To ensure the longevity and optimal performance of your Barrina LED Linear Light, follow these maintenance guidelines:

• Cleaning: Gently wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Inspection: Periodically check all connections and mounting hardware to ensure they are secure.
• Light Source: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need replacement.

7. Troubleshooting

If you encounter issues with your Barrina LED Linear Light, refer to the following common troubleshooting steps:

If the problem persists after trying these solutions, please contact Barrina customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Barrina website. If you require technical assistance, have questions about installation, or need to report a defect, please contact Barrina customer support directly.

Contact information can typically be found on the product packaging or the manufacturer's website.