amazon basics P80

amazon basics TWS in-Ear Earbuds P80 User Manual

Introduction

Welcome to your amazon basics TWS in-Ear Earbuds P80. This manual provides essential instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. These earbuds feature Bluetooth 5.3 connectivity, powerful 12mm dual drivers, IPX4 water resistance, and an extended playtime of up to 80 hours with the charging case.

Composite image showing amazon basics P80 earbuds, charging case, 80 hours playtime, Bluetooth 5.3, 10 min charge for 100 min playtime, in-built mic, smart touch control, 12mm dual drivers, IPX4 rating, and low latency gaming mode.

Figure 1: Overview of amazon basics TWS in-Ear Earbuds P80 features.

Setup

Charging the Earbuds and Case

Before initial use, fully charge both the earbuds and the charging case. Connect the charging case to a power source using a compatible USB cable. The indicator light on the case will display the charging status. A quick 10-minute charge can provide approximately 100 minutes of playtime.

Image showing amazon basics P80 earbuds in charging case with 'Up to 80 Hrs Playtime' and '10 min Charge = 100 min Playtime' indicators.

Figure 2: Charging and Playtime capabilities.

Pairing with a Device

  1. Open the charging case. The earbuds will automatically power on and enter pairing mode.
  2. On your Bluetooth-enabled device (e.g., smartphone, tablet), navigate to the Bluetooth settings.
  3. Search for available devices and select "amazon basics P80" from the list.
  4. Once connected, the earbuds will provide an audio confirmation, and the device will show them as paired. Instant Wireless Pairing (IWP) ensures quick connection upon opening the case.
Image illustrating Bluetooth v5.3 connectivity and fast pairing with an earbud in a person's ear and the charging case nearby.

Figure 3: Bluetooth 5.3 Fast Pairing.

Operating Instructions

Wearing the Earbuds

Gently insert each earbud into the corresponding ear canal. Rotate slightly to achieve a comfortable and secure fit. Proper fit is crucial for optimal sound quality and noise isolation.

Close-up image of a person wearing an amazon basics P80 earbud in their ear, demonstrating proper fit.

Figure 4: Proper earbud placement.

Smart Touch Controls

The earbuds are equipped with intuitive touch controls on their outer surface. Refer to the following guide for common functions:

  • Single Tap: Play/Pause music, Answer/End a phone call.
  • Double Tap: Adjust volume (typically left for volume down, right for volume up, or context-dependent).
  • Triple Tap: Skip to the Next Song or Previous Song.
  • Hold Finger: Activate your device's voice assistant or reject an incoming call.
Image detailing smart touch controls for amazon basics P80 earbuds: single tap for play/pause, double tap for volume up/down, triple tap for next/previous song.

Figure 5: Smart Touch Control functions.

Music Playback

Once paired, your earbuds will automatically connect to your device. You can enjoy up to 80 hours of continuous music playback with the combined charge of the earbuds and the fully charged charging case.

Maintenance

Cleaning Your Earbuds

To maintain optimal performance and hygiene, regularly clean your earbuds and charging case. Use a soft, dry, lint-free cloth. Avoid using liquids, sprays, or harsh cleaning agents. Gently remove any earwax or debris from the ear tips and speaker mesh.

Water Resistance

The amazon basics P80 earbuds are rated IPX4, meaning they are resistant to splashing water from any direction and perspiration. This makes them suitable for workouts and light rain. Important: They are not waterproof and should not be submerged in water. Ensure the earbuds are completely dry before placing them back into the charging case to prevent damage.

Image showing amazon basics P80 earbuds with water droplets, indicating IPX4 water resistant and sweat proof rating.

Figure 6: IPX4 Water Resistance.

Troubleshooting

If you encounter issues with your earbuds, please refer to the following common solutions:

No Sound or Disconnection

  • Ensure both earbuds and the charging case have sufficient charge.
  • Verify that Bluetooth is enabled on your device and that the earbuds are selected as the audio output.
  • Try turning Bluetooth off and on again on your device, then attempt to reconnect.
  • If the issue persists, unpair the earbuds from your device's Bluetooth list and then re-pair them following the instructions in the Setup section.
  • Ensure the earbuds are within the effective Bluetooth range (typically 10 meters or 33 feet) of your connected device.

Earbuds Not Charging

  • Check that the charging cable is securely connected to both the charging case and the power adapter.
  • Ensure the power adapter is functioning correctly and connected to a live power outlet.
  • Clean the charging contacts on both the earbuds and inside the charging case with a dry cotton swab to remove any dust or debris that might be obstructing the connection.
  • Try using a different USB charging cable and power adapter.

Specifications

FeatureDetail
ModelP80
Brandamazon basics
Ear PlacementIn Ear
Form FactorIn Ear
Bluetooth Version5.3
Driver SizeDual 12mm
Impedance32 Ohms
Total PlaytimeUp to 80 hours (with charging case)
Fast Charging10 minutes charge for 100 minutes playtime
Water Resistance RatingIPX4
MicrophoneQuad Mic with ENC

Warranty Information

The amazon basics TWS in-Ear Earbuds P80 are covered by a 1-year limited warranty from the original date of purchase. This warranty covers manufacturing defects. Please retain your purchase receipt or proof of purchase for any warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Support

For additional support, frequently asked questions, or to contact customer service, please visit the official amazon basics store page or refer to the support section on Amazon.in.

Visit the amazon basics Store on Amazon.in

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.