1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Nylavee SK100 Computer Speakers. Please read this guide thoroughly to ensure optimal performance and longevity of your device.
2. Product Overview
The Nylavee SK100 is a computer sound bar designed to deliver high-fidelity stereo sound. It features multiple driver units and bass diaphragms for a rich audio experience, along with versatile connectivity options.
Figure 2.1: Nylavee SK100 Computer Speakers, front view.
2.1 Key Features
- 6 High-Performance Driver Units: Engineered for clear and rich sound.
- 2 Bass Diaphragms: Enhances low-frequency audio for deeper bass.
- Versatile Connectivity: Supports Bluetooth 5.0, 3.5mm AUX, and USB/Type-C audio input.
- Intuitive Control: Features a multi-function knob for power, volume, and mode selection.
- LED Lighting: Integrated LED lights with touch control.
2.2 Internal Components
Figure 2.2: Internal view of the Nylavee SK100, highlighting the 6 driver units for comprehensive sound delivery.
Figure 2.3: Detail of the two mica fiber bass diaphragms, designed to enhance low-frequency audio.
3. Setup Instructions
3.1 Power and Audio Connection (USB)
The Nylavee SK100 speakers are USB-powered, simplifying setup by using a single cable for both power and audio transmission. Connect the USB cable directly to a USB port on your computer or a compatible USB power adapter.
Video 3.1: USB Connection and Basic Controls. This video illustrates how to connect the speaker to a computer using a single USB cable for power and audio, and how to operate the volume knob and LED lights.
3.2 Alternative Connections (AUX, USB/TF Card)
For devices that support 3.5mm AUX output or require a different USB connection, the speaker offers additional flexibility. The speaker also supports TF card playback.
Video 3.2: SK020 Computer Soundbar User Guide. This video demonstrates various connection methods including AUX, USB, and TF card, along with Bluetooth pairing and light control.
Figure 3.1: Connecting the speaker in Wired Mode using a 3.5mm audio cable.
4. Operating Instructions
4.1 Power On/Off and Volume Control
To power on the speaker, press and hold the power button (integrated into the main knob). Rotate the knob to adjust the volume. The device will typically start in Bluetooth mode.
Figure 4.1: The multi-function knob controls power and volume.
4.2 Bluetooth Pairing
- Ensure the speaker is powered on and the blue light is flashing, indicating it is in Bluetooth pairing mode.
- On your device (smartphone, tablet, computer), navigate to Bluetooth settings.
- Find and select "SK100" (or similar model name) from the list of available devices.
- Once connected, the Bluetooth indicator light will turn solid blue.
Figure 4.2: Wireless connection via Bluetooth 5.0.
4.3 LED Light Control
The speaker features integrated LED lights. These can often be controlled via a touch-sensitive area or a dedicated button on the speaker. Refer to the specific video demonstrations for detailed operation.
4.4 Clearing Bluetooth History
To clear the Bluetooth pairing history, press and hold the play/pause button for 5 seconds. This can be useful for resolving connection issues or pairing with a new device.
5. Maintenance
To maintain the performance and appearance of your Nylavee SK100 speakers, follow these simple guidelines:
- Cleaning: Use a soft, dry cloth to wipe the exterior surfaces. Avoid abrasive cleaners or solvents.
- Storage: Store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the speakers or exposing them to excessive force, which could damage internal components.
6. Troubleshooting
If you encounter any issues with your Nylavee SK100 speakers, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Incorrect input mode, low volume, loose connection. | Check input mode (Bluetooth, AUX, USB). Increase volume on both speaker and source device. Ensure cables are securely connected. |
| Bluetooth pairing failure | Speaker not in pairing mode, device already paired, interference. | Ensure speaker is flashing blue. Clear Bluetooth history (press and hold play/pause for 5 seconds). Move closer to the speaker and away from other wireless devices. |
| Static or distorted sound (wired connection) | Faulty cable, interference, source device issue. | Try a different AUX or USB cable. Test with a different source device. Ensure the cable is not near power cables or other electronics causing interference. |
| LED lights not working | Lights turned off, power issue. | Press the touch control for LED lights to turn them on/off. Ensure the speaker is receiving adequate power. |
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | SK100 |
| Brand | Nylavee |
| Connectivity Technology | Auxiliary, USB, Bluetooth |
| Audio Output Mode | Stereo |
| Mounting Type | Tabletop |
| Material | Plastic |
| Product Dimensions | 176D x 39W x 39H millimeters (17.6 x 3.94 x 3.94 cm) |
| Item Weight | 890 g |
| Power Source | Battery Powered (implies internal battery or USB power) |
| Control Method | App (Note: Manual knob control is also present) |
| Surround Sound Channel Configuration | 2.0 |
8. Warranty and Support
Specific warranty information for the Nylavee SK100 Computer Speakers is not provided in this manual. For warranty details, technical support, or further assistance, please refer to the official Nylavee website or contact their customer service directly.
You can visit the Nylavee Store for more information: Nylavee Store on Amazon
