Memobarco 18-Inch Leather Vanity Stool Chair User Manual

Introduction

Thank you for choosing the Memobarco 18-Inch Leather Vanity Stool Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new stool. Designed for ergonomic comfort and versatile use, this stool features premium synthetic leather upholstery, a high-resilience foam cushion, and sturdy X-frame metal legs.

Safety Information

WARNING:

• Children should not climb on or play with the product for safety reasons.
• Ensure all screws are securely tightened before use to prevent instability.
• Do not exceed the maximum weight recommendation of 300 pounds.
• Use on a flat, stable surface. Adjust leveling feet as needed.

Package Contents

Please check the package to ensure all components are present:

• 1 x Upholstered Saddle Seat
• 2 x X-shaped Metal Leg Frames
• 1 x Cross Stretcher Bar
• 6 x M6*30 Screws (for cross stretcher and X-shaped legs)
• 4 x M6*20 Screws (for upholstered seat)
• 1 x Hex Key (Allen wrench)
• Adjustable Leveling Feet (pre-attached to leg frames)

Assembly Instructions

Assembly is quick and easy, typically taking 5 minutes or less. Follow these steps:

1. Step 1: Attach Cross Stretcher to X-shaped Legs

   Align the cross stretcher bar (B) with the pre-drilled holes on the X-shaped leg frames (A). Insert two M6*30 screws (E) and tighten them approximately 70% using the provided hex key. Do not fully tighten yet to allow for adjustments.

   

   Image: Diagram illustrating the initial step of connecting the cross stretcher to the X-shaped leg frames using screws.

2. Step 2: Install the Upholstered Seat

   Place the upholstered saddle seat (C) upside down. Align the assembled leg frame with the four pre-drilled holes on the underside of the seat. Insert four M6*20 screws (D) and tighten them approximately 70%.

   

   Image: Diagram illustrating the second step of attaching the upholstered seat to the leg frame using screws.

3. Step 3: Final Tightening and Stability Check

   Once all screws are in place, fully tighten all 6 M6*30 screws and 4 M6*20 screws. Turn the stool upright and check its stability. Adjust the leveling feet on the bottom of the legs if the stool wobbles on uneven surfaces.

   

   Image: Diagram illustrating the final step of tightening all screws and adjusting leveling feet for stability.

Visual Assembly Guide:

Video: A user demonstrates the assembly process for the Memobarco Leather Vanity Stool Chair, showing how to attach the legs and seat.

Operating Instructions

The Memobarco Vanity Stool is designed for versatile use. Simply place it in your desired location. The adjustable leveling feet can be rotated to compensate for uneven floors, ensuring a stable and secure seating experience.

Image: The stool positioned as a comfortable footrest, highlighting its versatile functionality.

Image: The stool serving as a vanity chair, demonstrating its suitability for makeup and grooming areas.

Video: An overview of the Memobarco Saddle Ottoman Vanity Stool, showcasing its design, features, and various uses in different settings.

Maintenance and Care

To maintain the quality and appearance of your stool:

• Cleaning: Wipe the synthetic leather upholstery with a dry cloth. For minor spills, a damp cloth with mild soap can be used, followed by drying thoroughly.
• Frame Care: The metal X-legs can be wiped clean with a dry cloth.
• Regular Checks: Periodically check all screws and tighten if necessary to ensure continued stability.

Image: A hand wiping the synthetic leather seat, demonstrating the ease of cleaning.

Specifications

Warranty and Support

Memobarco provides professional after-sales service for any inquiries or issues. Do not hesitate to contact us for assistance. We guarantee a response as soon as possible and will deliver satisfactory solutions.

For further support, please refer to the contact information provided with your purchase or visit the official Memobarco store online.