1. Introduction
Thank you for choosing the SANOTO Y30 Open Ear Bluetooth 5.3 Wireless Sport Earbuds. These earbuds are designed to provide a comfortable listening experience while maintaining awareness of your surroundings. Featuring directional sound transmission, IPX6 water resistance, and intuitive touch controls, they are ideal for various activities including work, sports, and exercise.
2. Package Contents
Please check the package to ensure all items are present:
- SANOTO Y30 Open Ear Bluetooth Earbuds x 1
- Charging Case x 1
- USB Charging Cable x 1
- Instruction Manual x 1
Image: The SANOTO Y30 Open Ear Bluetooth Earbuds shown with their charging case.
3. Setup
3.1 Charging the Earbuds and Case
Before first use, fully charge the earbuds and charging case. Connect the provided USB charging cable to the charging port on the case and a power source. The indicator lights on the case will show the charging status.
- Charging Time: Approximately 1.5 hours for a full charge.
- Battery Life: Up to 6 hours of playtime per earbud, and up to 30 hours total with the charging case.
Image: Visual representation of the earbuds' battery life and charging time.
3.2 Pairing with a Device
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "SANOTO Y30" from the list of devices.
- Once connected, the earbud indicator lights will stop flashing.
The earbuds use Bluetooth 5.3 technology for a fast and stable connection.
4. Operating Instructions
4.1 Wearing the Earbuds
The SANOTO Y30 earbuds feature an ergonomic earhook design for a secure and comfortable fit. Gently place the earhook over your ear, ensuring the speaker is positioned correctly near your ear canal for optimal sound transmission without blocking your ear.
Image: A person wearing the SANOTO Y30 earbuds, highlighting the open-ear design and ergonomic fit.
4.2 Touch Controls
The earbuds are equipped with multi-functional touch buttons for easy control of music, calls, and voice assistant. The touch area is located on the outer surface of each earbud.
| Function | Action | Earbud |
|---|---|---|
| Power On | Tap x3 | Either side |
| Shutdown | Tap x5 | Either side |
| Play/Pause | Tap x1 | Either side |
| Previous Song | Tap x2 | Left earbud |
| Next Song | Tap x2 | Right earbud |
| Volume Up | Tap x3 | Left earbud |
| Volume Down | Tap x3 | Right earbud |
| Answer/Hang Up Call | Tap x1 | Either side |
| Reject Call | Tap x2 | Either side |
| Voice Assistant | Tap x2 | Either side |
Image: A diagram illustrating the touch control functions for the SANOTO Y30 earbuds.
5. Maintenance
5.1 Cleaning
Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
5.2 Water Resistance (IPX6)
The SANOTO Y30 earbuds are IPX6 water-resistant, meaning they are protected against high-pressure water jets from any direction. This makes them suitable for sports and outdoor use, including protection against sweat and rain. Note: The charging case is not water-resistant. Do not submerge the earbuds or expose them to saltwater or other liquids.
Image: The SANOTO Y30 earbuds with water droplets, demonstrating their IPX6 water resistance.
5.3 Storage
When not in use, store the earbuds in their charging case to protect them from dust and damage. Store in a cool, dry place away from extreme temperatures.
6. Troubleshooting
If you encounter any issues with your SANOTO Y30 earbuds, please refer to the following common solutions:
- Earbuds not pairing:
- Ensure both earbuds are charged.
- Turn off Bluetooth on your device and turn it back on.
- Delete "SANOTO Y30" from your device's Bluetooth list and try pairing again.
- Place earbuds back in the case, close it, wait a few seconds, then open to re-enter pairing mode.
- No sound or intermittent sound:
- Check the volume level on both your device and the earbuds.
- Ensure the earbuds are within the Bluetooth range of your device (typically 10 meters/33 feet).
- Try reconnecting the earbuds to your device.
- Earbuds not charging:
- Ensure the charging cable is securely connected to both the case and the power source.
- Check if the charging port is clean and free of debris.
- Try using a different USB charging cable or power adapter.
- Microphone issues:
- Ensure the microphone is not obstructed.
- Check your device's settings to ensure the earbuds are selected as the input device for calls.
- The earbuds feature dual-mic noise cancellation for clearer calls.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | Y30 |
| Wireless Technology | Bluetooth 5.3 |
| Driver Size | 14.2 mm |
| Water Resistance | IPX6 (Earbuds only) |
| Earbud Playtime | Up to 6 hours |
| Total Playtime (with case) | Up to 30 hours |
| Charging Time | Approx. 1.5 hours |
| Control Type | Touch Control |
| Microphone | Built-in, with dual-mic noise cancellation |
| Frequency Range | 20 Hz - 20 kHz |
| Impedance | 14.2 ohms |
| Compatible Devices | Smartphones, tablets, laptops, smartwatches |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
8. Warranty and Support
The SANOTO Y30 Open Ear Bluetooth Earbuds come with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or further assistance, please contact SANOTO customer service through the retailer where you purchased the product or visit the official SANOTO website. Please have your proof of purchase and product model number (Y30) ready when contacting support.
Note: Information regarding spare parts availability and software updates is not available at this time.
