1. Introduction and Overview
The ExpertPower 10KW 48V Hybrid Solar Inverter is a versatile power solution designed for both off-grid and grid-tied applications. It integrates a built-in MPPT solar charger with a 12KW maximum solar input and a 200A utility battery charger, ensuring optimal energy utilization. This inverter supports two 6000W PV inputs, each capable of handling up to 600V open circuit voltage from solar panels, providing flexibility and high efficiency in solar energy collection.
Featuring dual 100A MPPT charge controllers and a 10KW pure sine wave inverter, it delivers a robust 10KW rated output (20KW surge) compatible with 120/208/240Vac. Its split-phase operation allows for powering both standard 120V and high-voltage 240V appliances, including HVAC systems, from a single unit. The inverter is compatible with various battery types, such as SLA, AGM, GEL, and Lithium LiFePO4, and can efficiently power loads directly from PV arrays or the AC grid even without a connected battery.
For enhanced scalability, the inverter supports parallel connection of up to 6 units, boosting the system's capacity to a maximum of 60KW. Advanced connectivity options include built-in Wi-Fi for remote monitoring via a dedicated app (iOS/Android), a detachable LCD control module, and multiple communication ports (RS485, CAN-BUS, RS232) for seamless integration with Battery Management Systems (BMS).
2. Safety Information
This inverter is designed with safety as a priority, adhering to UL1741 and IEEE1547 standards for secure interconnection with the grid. It is rated IP65 for protection against dust and water, ensuring durability in various environmental conditions. Always ensure proper installation and follow local electrical codes.
- UL1741 & IEEE1547 Compliance: Certified for safety and performance in grid-tied applications.
- IP65 Rating: Provides protection against dust and water ingress.
- Arc Fault Detection (AFCI): Automatically detects and mitigates dangerous electrical arcs.
- Leakage Current Protection: Monitors for AC leakage current and disconnects the inverter if a fault is detected.
- Over Temperature Protection: Shuts down the inverter to prevent overheating.
- Over Voltage/Under Voltage Protection: Safeguards against voltage fluctuations.
- Over Current/Overload Protection: Prevents damage from excessive current draw.
- Short Circuit Protection: Protects against short-circuit conditions.
For detailed safety settings and configurations, refer to the 'Other' section in the Advanced Setup menu on the inverter's display or the mobile application.
Video: ECO-WORTHY 48V Server Rack Battery with UL1973 & UL9540A. This video highlights the UL certifications and safety features of a compatible server rack battery, emphasizing the importance of certified components in a solar system.
3. Product Features
The ExpertPower Hybrid Solar Inverter is packed with features to provide reliable and efficient power management:
- Dual MPPT Solar Charger: 12KW max solar input with two 6000W PV inputs, each up to 600V open circuit voltage.
- Pure Sine Wave Output: 10KW rated output (20KW surge), compatible with 120/208/240Vac for sensitive electronics.
- Grid-Tie & Off-Grid Capabilities: Supports both remote off-grid use and grid-tied residential/commercial applications.
- Battery Compatibility: Works with SLA, AGM, GEL, and Lithium LiFePO4 batteries. Can operate without batteries.
- Split Phase Operation: Delivers both 120V and 240V from a single unit, simplifying installation for various appliances.
- Parallel Functionality: Connect up to 6 units for a maximum capacity of 60KW.
- Advanced Connectivity: Built-in Wi-Fi for remote monitoring via app, detachable LCD, RS485, CAN-BUS, RS232 ports for BMS integration.
- High Charging Current: 200A utility battery charger for rapid battery replenishment.
Image: ExpertPower Hybrid Solar Inverter Features. This graphic summarizes the key features of the inverter, including battery compatibility, scalability, grid connection, certifications, flexible settings, versatile design, and wireless communication.
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your ExpertPower Hybrid Solar Inverter. Always ensure all power sources are disconnected before beginning installation.
4.1 Physical Installation and Wiring
Mount the inverter in a suitable location, considering its dimensions and weight (109 pounds). Ensure adequate ventilation and protection from environmental elements, as indicated by its IP65 rating. Connect the PV arrays, battery bank, and AC input/output lines according to the wiring diagram provided in the manual.
Image: ExpertPower Hybrid Solar Inverter Diagram. This diagram illustrates the front, side, and bottom views of the inverter, detailing the location of the LCD display, side buttons, and various connection ports within the cable box, including breakers, communication ports, battery terminals, PV terminals, and AC terminals.
4.2 Parallel Connection
For increased power capacity, multiple inverters can be connected in parallel. The parallel kit allows up to 6 units to operate together, achieving up to 60KW. Follow the specific instructions for parallel communication cabling and configuration.
Video: 10kW Inverter Parallel Connection And Parameter Setting. This video demonstrates the physical steps for connecting two 10kW inverters in parallel and configuring their settings for synchronized operation.
Video: POWLAND 12000W Grid-Tied Hybrid Solar Inverter. This video provides an unboxing and overview of a similar hybrid solar inverter, showing its components and initial setup steps.
Video: SPH8K 10K AND100P battery. This video demonstrates the power and communication connections for a battery pack, which is essential for integrating with the inverter.
5. Operating Instructions
The inverter features a detachable LCD control module for local operation and a Wi-Fi module for remote monitoring and management via a mobile app.
5.1 Display and Controls
The LCD display provides real-time system status, including PV input, battery charge/discharge, AC output, and load consumption. Use the operation buttons on the module to navigate menus and adjust settings.
5.2 System Preferences
Configure charging priority (Solar Priority, Solar and AC Input, Solar Only) and load priority (Solar Priority, AC Priority, DC Priority) to optimize energy flow based on your needs. The inverter also supports load shifting based on Time-of-Use (TOU) energy rates.
Image: ExpertPower Hybrid Solar Inverter Preferences. This graphic illustrates the various charging and load priority settings available on the inverter, allowing users to customize how power is sourced and distributed.
Video: PowMr 12000W Inverter Menu & Setup Guide-3. This video demonstrates how to navigate the inverter's menu, including battery setup and advanced settings, which are crucial for proper operation.
5.3 Remote Monitoring
Utilize the built-in Wi-Fi and dedicated mobile app (iOS/Android) to monitor and manage your inverter remotely. This allows for convenient adjustments and oversight of your energy usage from anywhere.
Image: ExpertPower Hybrid Solar Inverter Wi-Fi Monitoring. This image illustrates the remote monitoring capabilities of the inverter via a dedicated app on various devices, showing system data and control options.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter. Keep the unit clean and free from dust and debris. Periodically check all electrical connections for tightness and signs of wear. Ensure ventilation openings are unobstructed. For any internal maintenance, always consult a qualified technician.
7. Troubleshooting
If you encounter issues with your inverter, refer to the troubleshooting section in the full product manual for specific error codes and solutions. Common issues often relate to loose connections, incorrect settings, or environmental factors. Always ensure all safety precautions are followed before attempting any troubleshooting steps.
- No Power Output: Check AC input, battery connections, and inverter's ON/OFF switch.
- Fault Codes on Display: Consult the manual for specific fault code meanings and corrective actions.
- Battery Not Charging: Verify PV input, battery type settings, and charging current limits.
- Remote Monitoring Issues: Ensure Wi-Fi connectivity, correct app configuration, and strong signal strength.
8. Specifications
| Feature | Value |
|---|---|
| Model Name | 10KW Hybrid Solar Inverter Grid-Tie / Off-Grid |
| Item Model Number | IVV48V10KW |
| Product Dimensions | 20.3 x 20.3 x 31.4 inches (51.56 x 51.56 x 79.76 cm) |
| Item Weight | 109 pounds (49.44 kg) |
| Power Source | Solar Powered |
| Max. Solar PV Input | 12KW (Two 6000W PV inputs, up to 600V open circuit voltage each) |
| AC Output Power | 10000W (10KW rated, 20KW surge) |
| AC Output Voltage | 120V/240V/208V (Split Phase) |
| Battery Charger | 200A Utility Battery Charger |
| MPPT Charge Controllers | Dual 100A |
| Parallel Capability | Up to 6 units (Max. 60KW) |
| Certifications | UL1741, IEEE1547 |
| Protection Rating | IP65 |
| Connectivity | Built-in Wi-Fi, Detachable LCD, RS485, CAN-BUS, RS232 |
9. Warranty and Support
ExpertPower is committed to providing reliable products and excellent customer service. For specific warranty details, please refer to the warranty card included with your product or contact ExpertPower customer support directly. Support is available to assist with setup, troubleshooting, and any product-related inquiries.
You can find customer support information on the ExpertPower website or through your purchase platform. Many users have reported positive experiences with ExpertPower's customer service, particularly for assistance with initial setup and technical questions.
- Customer Support: Available for setup assistance and technical inquiries.
- Returns: 30-day easy returns policy.
