Invicta Racing Men's 52mm Dial Electronic Digital Watch

Introduction

This manual provides detailed instructions for the proper use and care of your Invicta Racing Men's 52mm Dial Electronic Digital Watch, Model 47526. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Front view of the Invicta Racing Men's 52mm Dial Electronic Digital Watch.

Key Features:

• 52mm case size for a prominent display.
• Digital movement for precise timekeeping.
• 100 meters (10 ATM) water resistance.
• Durable polyurethane band with buckle clasp.
• Functions include time, date, chronograph, alarm, and backlight.

Setup

Before using your watch, ensure any protective films are removed from the crystal and case back. The watch is pre-set at the factory, but you may need to adjust the time and date.

Button Functions:

Side view illustrating the watch buttons: Light, Mode, Start, and Reset.

• LIGHT: Activates the backlight for visibility in low-light conditions.
• MODE: Cycles through different display modes (Time, Chronograph, Alarm, Timer).
• START: Used to start/stop functions in Chronograph or Timer mode, and to adjust settings.
• RESET: Used to reset functions in Chronograph or Timer mode, and to adjust settings.

Setting Time and Date:

1. From the normal time display, press the MODE button repeatedly until the time setting mode is indicated (often by flashing digits).
2. Use the START button to increase the flashing digit (hours, minutes, seconds).
3. Use the RESET button to move to the next digit or setting (e.g., from hours to minutes, then to date).
4. Continue adjusting until the correct time and date are set.
5. Press MODE again to exit the setting mode and return to the normal time display.

The watch display showing the time and date, which can be adjusted using the side buttons.

Operating Instructions

Time Display:

The default mode displays the current time (hours, minutes, seconds), day of the week, and date.

The watch display with the backlight activated for enhanced visibility.

Press the LIGHT button to illuminate the display for a few seconds.

Chronograph (Stopwatch) Mode:

1. Press MODE until 'CHRONO' or 'STOPWATCH' appears on the display.
2. Press START to begin timing.
3. Press START again to pause timing.
4. Press RESET to clear the stopwatch to zero.
5. To record lap times, press RESET while the stopwatch is running. The lap time will display briefly, and the stopwatch will continue running in the background.

Alarm Mode:

1. Press MODE until 'ALARM' appears.
2. Press START to adjust the alarm hour.
3. Press RESET to move to the alarm minute.
4. Press START to adjust the alarm minute.
5. Press MODE to confirm and exit.
6. To activate/deactivate the alarm, typically press START and RESET simultaneously in alarm mode, or look for an alarm icon on the display.

Timer Mode:

Specific instructions for timer mode may vary. Generally, you will:

1. Press MODE until 'TIMER' appears.
2. Use START and RESET to set the desired countdown time.
3. Press START to begin the countdown.
4. The watch will typically beep when the timer reaches zero.

Maintenance

Cleaning:

To clean your watch, wipe it gently with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly. Avoid harsh chemicals or abrasive materials.

Water Resistance (100 Meters / 10 ATM):

Your watch is water resistant to 100 meters. This means it is suitable for swimming, snorkeling, and showering. However, it is not suitable for scuba diving. Do not operate the buttons while the watch is submerged in water, as this can compromise the water resistance.

The watch case back, indicating '100M Water Resistant'.

Battery Replacement:

When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance. Attempting to replace the battery yourself may void the warranty and damage the watch.

Troubleshooting

Specifications

Detailed view of the watch highlighting key specifications like crystal type, band, date/day display, and case size.

• Model Number: 47526
• Case Size: 52mm
• Movement Type: Digital
• Crystal Type: Mineral Crystak (Scratch resistant)
• Water Resistance: 100 meters (10 ATM)
• Band Material: High-grade silicone/polyurethane
• Clasp Type: Buckle
• Product Dimensions: 3.9 x 4.45 x 3.62 inches
• Item Weight: 2.19 ounces

Illustration emphasizing the electronic digital movement for precise timekeeping.

Warranty and Support

Invicta watches typically come with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty duration and coverage details. Keep your proof of purchase for warranty claims.

For technical support, service, or warranty inquiries, please visit the official Invicta website or contact their customer service department. You can find more information and contact details on the Invicta Store on Amazon.