BOTSLAB G980H Hardwire Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation and operation of the BOTSLAB G980H Hardwire Kit. This kit is specifically designed to provide continuous power to your BOTSLAB G300H dashcam, enabling its 24-hour parking monitoring feature and protecting your vehicle's battery from discharge.

2. Package Contents

Verify that all items are present in the package:

• Hardwire Kit x 1
• User Guide x 1

Figure 2.1: Package Contents

3. Product Features

• Secure Parking Protection: Enables up to 24-hour monitoring for your dashcam, utilizing time-lapse recording or collision-triggered normal recording when the vehicle is parked. This ensures continuous surveillance and protection.
• Designed for BOTSLAB G300H Dashcam: Specifically engineered for seamless compatibility with the BOTSLAB G300H dashcam, featuring a Micro-USB port. The 9-foot cable length allows for flexible installation in most vehicle types.
• Battery Drain Prevention: Incorporates under-voltage protection to prevent your vehicle's battery from draining. It supports an input voltage range of DC12V-30V and provides a stable output of 5V/2.4A. Constructed with high-quality materials for reliable performance in various environmental conditions.
• Easy Installation: Designed for a straightforward, three-step installation process: power source testing, wire setup, and dashcam connection. A detailed guide is provided to facilitate a hassle-free setup.
• Safety Standards: Manufactured to meet relevant safety standards and certifications, ensuring the hardwire kit is both safe and effective for use.

4. Safety Information

Please read and understand all safety instructions before installation and use. Improper installation can lead to vehicle damage or personal injury.

• Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical shorts.
• The hardwire kit is designed for DC12V-30V input. Do not connect to other voltage sources.
• The kit includes under-voltage protection to prevent battery drain. However, prolonged parking monitoring in extremely cold conditions or with an old battery may still affect battery performance.
• If you are unsure about any part of the installation process, consult a professional auto electrician.

Figure 4.1: Battery Drain Prevention Overview

5. Installation Guide

Follow these steps for a proper installation of your BOTSLAB G980H Hardwire Kit:

5.1 Identify Components

Figure 5.1: Hardwire Kit Component Overview

• Micro USB Port: Connects to your BOTSLAB G300H dashcam.
• Power Conversion Box: Regulates voltage from the car battery to the dashcam.
• Yellow Wire (ACC): Connects to a fuse that is only powered when the ignition is on (Accessory power).
• Red Wire (VCC+): Connects to a fuse that has constant power (Battery power), even when the ignition is off.
• Black Wire (GND-): Connects to a metal bolt or screw on the vehicle's chassis for grounding.

5.2 Installation Steps

1. Test Power Sources:

   Locate your vehicle's fuse box. Using a circuit tester, identify a fuse that provides constant power (12V when the car is off) for the Red Wire (VCC+) and a fuse that provides accessory power (12V only when the ignition is on) for the Yellow Wire (ACC). Also, identify a suitable grounding point (a metal bolt or screw on the car's chassis) for the Black Wire (GND-).

2. Set Up the Wires:

   Connect the Red Wire (VCC+) to the constant power fuse using a fuse tap (not included). Connect the Yellow Wire (ACC) to the accessory power fuse using another fuse tap. Securely attach the Black Wire (GND-) to the chosen grounding point. Route the wires neatly along the vehicle's interior trim to conceal them and prevent interference with driving controls.

3. Connect the Dashcam:

   Plug the Micro-USB connector from the hardwire kit into the Micro-USB port on your BOTSLAB G300H dashcam. Ensure the connection is secure. Turn on your vehicle's ignition to verify that the dashcam powers on correctly and the parking monitor feature is enabled.

6. Operating Instructions

6.1 24-Hour Parking Monitor

Once the BOTSLAB G980H Hardwire Kit is correctly installed, your BOTSLAB G300H dashcam will automatically activate its 24-hour parking monitoring feature when the vehicle's ignition is turned off.

• Time-Lapse Recording: The dashcam will record continuously in time-lapse mode, capturing extended periods of activity in a compressed format.
• Collision-Triggered Recording: If the vehicle experiences an impact or collision while parked, the dashcam will automatically switch to normal recording mode to capture the event in detail.
• Low Voltage Protection: The hardwire kit monitors your vehicle's battery voltage. If the voltage drops below a safe threshold, the kit will automatically cut power to the dashcam to prevent complete battery discharge, ensuring your vehicle can still start.

Figure 6.1: Parking Monitoring Feature

7. Maintenance

The BOTSLAB G980H Hardwire Kit requires minimal maintenance. Periodically check the connections to ensure they remain secure. Ensure the cable routing does not interfere with vehicle operations or become damaged by moving parts.

8. Troubleshooting

• Dashcam does not power on after installation:
  • Check all wire connections (Red, Yellow, Black) to ensure they are secure and correctly connected to their respective power sources and ground.
  • Verify that the fuse taps are properly installed and the fuses are not blown.
  • Ensure the Micro-USB connector is fully inserted into the dashcam.
• Parking Monitor feature is not active:
  • Confirm that the Red Wire (VCC+) is connected to a constant power source and the Yellow Wire (ACC) is connected to an accessory power source. If the ACC wire is connected to a constant power source, the dashcam may not detect the ignition being off.
  • Check your dashcam's settings to ensure the parking monitor feature is enabled.
• Vehicle battery drains quickly:
  • While the kit has low voltage protection, prolonged use of parking mode on an older or weak battery can still lead to discharge. Consider reducing parking monitor duration if your dashcam allows, or check your vehicle's battery health.
  • Ensure the low voltage cut-off setting on your dashcam (if applicable) is set appropriately.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please contact BOTSLAB customer service. Refer to the contact details provided in the original product packaging or visit the official BOTSLAB website.

Email: service@botslab.com