Introduction
The Viconor Laser Hair Growth Cap is designed to provide a convenient and effective solution for hair growth therapy using low-level light therapy (LLLT). This manual provides essential information on how to set up, operate, maintain, and troubleshoot your device to ensure optimal performance and safety.
Safety Information
Please read all safety instructions carefully before using the device. Failure to follow these instructions may result in injury or device damage.
- Eye Safety: Do not look directly into the laser lights. Although the light is low-level, prolonged direct exposure may cause eye discomfort.
- Medical Conditions: Consult with a healthcare professional before use if you have any pre-existing medical conditions, are pregnant, or are taking photosensitizing medications.
- Children and Pets: Keep the device out of reach of children and pets.
- Water Exposure: Do not immerse the device in water or use it in wet environments.
- Damage: Do not use the device if it appears damaged. Contact customer support for assistance.
- Power Source: Use only the provided power adapter or a compatible power bank.
Package Contents
- Viconor Laser Hair Growth Cap
- Controller with integrated cable
- Power Adapter
- User Manual
Product Overview
The Viconor Laser Hair Growth Cap is designed for ease of use and comfort. It features an array of red light LEDs strategically placed within a comfortable cap, connected to an intuitive controller for managing therapy sessions.
Image: The Viconor Laser Hair Growth Cap, showing the cap with internal red lights and the attached controller.
Setup
- Unpack: Carefully remove all components from the packaging.
- Connect Power: Connect the controller cable to the power adapter.
- Power Source: Plug the power adapter into a standard wall outlet. Alternatively, for portable use, connect the controller to a compatible power bank (not included) using a USB cable. Direct plug-in is recommended for stable performance.
Image: Illustration of the two power supply methods: direct wall outlet connection or via a portable power bank.
Operating Instructions
- Wear the Cap: Place the Viconor cap comfortably on your head. The cap features an adjustable Velcro strap at the back to ensure a secure and comfortable fit for most head sizes.
- Power On: Press the power button on the controller to turn on the device. The lights inside the cap will illuminate.
- Select Mode: The cap features four steady light modes and a 10Hz pulse mode. Use the mode selection buttons on the controller to cycle through the available light modes.
- Set Session Time: Use the timer buttons on the controller to set your desired session duration, ranging from 0 to 30 minutes.
- Begin Therapy: Once the mode and time are set, the therapy session will begin. The cap will automatically shut off once the set time has elapsed.
- Recommended Usage: For optimal results, use the cap for 30 minutes, 3-5 times per week. Consistency is key for effective therapy.
Image: The Viconor cap with its adjustable Velcro strap, highlighting its suitability for various head sizes.
Maintenance
- Cleaning: To clean the cap, gently wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the cap in water. Ensure the device is unplugged before cleaning.
- Storage: Store the cap in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use to prevent damage.
- Cable Care: Avoid bending or twisting the power cable excessively. Do not pull on the cable to unplug the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly connected to power source; Power outlet issue; Damaged cable/controller. | Ensure all connections are secure. Try a different power outlet. Inspect cable and controller for visible damage. Contact support if damaged. |
| Lights are dim or flickering. | Insufficient power supply (if using power bank); Device malfunction. | Ensure power bank is fully charged or switch to wall adapter. If problem persists, contact support. |
| Cap feels too warm. | Normal operation; Prolonged use. | A slight warmth is normal. If it becomes uncomfortably hot, discontinue use and allow to cool. Ensure proper ventilation. |
Specifications
- Model: B0D3QH4DVM
- Manufacturer: Viconor
- Package Dimensions: 10.75 x 7.64 x 4.41 inches
- Weight: 1.41 Pounds
- Light Modes: 4 steady modes + 10Hz pulse mode
- Session Timer: 0-30 minutes (adjustable)
Warranty
Viconor products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your purchase or visit the official Viconor website.
Support
For further assistance, technical support, or inquiries about your Viconor Laser Hair Growth Cap, please contact Viconor customer service through the contact information provided on the product packaging or the official Viconor website. Please have your model number (B0D3QH4DVM) ready when contacting support.