Gedsffati [5-in-1] Portable Carbon Monoxide Detector User Manual

1. Introduction

Thank you for choosing the Gedsffati [5-in-1] Portable Carbon Monoxide Detector. This compact and versatile device is designed to provide real-time monitoring of Carbon Monoxide (CO) levels, temperature, humidity, atmospheric pressure, and altitude. Its integrated sensor system and long battery life make it ideal for various environments, including camping, climbing, RV travel, and indoor use. Please read this manual thoroughly to ensure proper operation and safety.

2. Product Overview

2.1 Package Contents

• Gedsffati [5-in-1] CO Detector x1
• 128M SD Card x1
• Lanyard x1
• User Manual x1
• Type-C Charging Cable

2.2 Device Components

Familiarize yourself with the main components of your Gedsffati 5-in-1 detector:

Figure 2.2.1: Front view of the Gedsffati 5-in-1 Portable Carbon Monoxide Detector, showing the display screen, three control buttons (A, Power, B), and a lanyard attached.

• Display Screen: 2.48'' HD screen showing CO concentration, atmospheric pressure, altitude, temperature, and humidity.
• Control Buttons: Three buttons (A, Power, B) for navigation and operation.
• USB-C Port: For charging the device.
• SD Card Slot: For inserting the 128MB SD card to record data.
• Sensor Vents: Located on the sides and back for air intake to the sensors.

2.3 Integrated Sensors

The device integrates five key sensors for comprehensive environmental monitoring:

Figure 2.3.1: Visual representation of the 5-in-1 sensor capabilities, including Carbon Monoxide (CO), Temperature, Humidity, Altitude, and Atmospheric Pressure (Atmos).

• CO Sensor: Detects Carbon Monoxide levels (0-1000 ppm).
• Temperature Sensor: Measures ambient temperature (14℉-140℉).
• Humidity Sensor: Measures relative humidity (5%-95% RH).
• Atmospheric Pressure Sensor: Measures atmospheric pressure (300-1100 hPa).
• Altitude Sensor: Calculates altitude based on atmospheric pressure (-500-9000 m).

3. Setup

3.1 Initial Charging

Before first use, fully charge the device using the provided Type-C charging cable. Connect the cable to the device's USB-C port and a compatible USB power adapter (not included). The battery indicator on the screen will show charging status.

Figure 3.1.1: The device features a 2000 mAh battery, supports sleep mode for power saving, and charges via Type-C, providing up to 144 hours of battery life.

3.2 SD Card Installation

The device comes with a 128MB SD card for data recording. Locate the SD card slot on the side of the device and gently insert the SD card until it clicks into place. Ensure the card is inserted in the correct orientation.

Figure 3.2.1: The device records CO data to the included 128MB SD card, allowing for analysis of historical data on a computer.

3.3 Powering On/Off

Press and hold the central Power button to turn the device on or off. Upon powering on, the device will perform a self-check and then display real-time readings.

3.4 Setting Date and Time

To set or adjust the date and time, ensure the unit is powered on. Remove and then reinsert the SD card. This action activates the date/time setting mode. Use the Power button to cycle through year, date, and time settings. Use the 'A' and 'B' buttons to adjust the values up or down respectively.

4. Operating Instructions

4.1 Real-Time Monitoring

Once powered on, the device continuously monitors and displays the following parameters on its HD screen:

• CO: Carbon Monoxide concentration in Parts Per Million (PPM).
• Atmos: Atmospheric pressure in hPa.
• Altitude: Altitude in meters or feet.
• Temperature: Temperature in Fahrenheit (℉) or Celsius (℃).
• Humidity: Relative humidity in percentage (RH%).

Figure 4.1.1: The device displays real-time environmental data and provides clear indicators for CO hazard levels.

4.2 Carbon Monoxide (CO) Alarm Modes

The device features a multi-stage alarm system for CO detection:

• 0-50 ppm: No alarm. Green indicator light breathes (flashes slowly).
• 51-200 ppm: Alarm sounds "di" every 2 minutes. Orange indicator light illuminates.
• 201-1000 ppm: Alarm sounds continuously. Red indicator light illuminates.

Important: If the CO alarm sounds, immediately move to fresh air and investigate the source of CO. Do not ignore CO alarms.

4.3 Power-Saved Mode (Sleep Mode)

To conserve battery, the screen will automatically turn off after 30 seconds of inactivity. The sensors will continue to operate and monitor the environment in the background. Press any button to reactivate the screen.

Figure 4.3.1: The device's screen auto-off feature provides a comfortable dark environment for sleeping while still monitoring.

4.4 Data Recording

The device automatically records CO and other sensor data to the inserted SD card at 5-minute intervals. This data is stored as daily CSV files, which can be accessed and analyzed on a computer by removing the SD card and inserting it into a card reader.

Note: The USB-C port is for charging only and does not support data transfer from the SD card directly to a computer.

4.5 Usage Scenarios

The portable design and multi-sensor capabilities make this detector suitable for various applications:

Figure 4.5.1: The included lanyard makes the device convenient for outdoor activities like camping and climbing, providing safety on the go.

• Outdoor Activities: Camping, hiking, climbing, RV travel.
• Indoor Environments: Home, hotel rooms, bedrooms, offices.

For optimal monitoring, ensure the device's sensor vents (located on the sides and back) are not obstructed and the device is placed upright.

5. Maintenance

5.1 Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure sensor vents remain clear of dust and debris.

5.2 Battery Care

The device is equipped with a built-in 2000 mAh lithium battery. To prolong battery life:

• Charge the device fully before extended storage.
• Avoid exposing the device to extreme temperatures.
• Use the power-saved mode when not actively viewing the screen.

5.3 SD Card Management

Regularly back up data from the SD card to your computer. If the SD card becomes full or corrupted, replace it with a new one (compatible with microSD format).

6. Troubleshooting

If you encounter issues with your Gedsffati 5-in-1 CO detector, please refer to the following common problems and solutions:

7. Specifications

Figure 7.1.1: Physical dimensions of the Gedsffati 5-in-1 CO Detector.

8. Warranty and Support

8.1 Warranty Information

The Gedsffati 5-in-1 Portable Carbon Monoxide Detector comes with a 3-year free exchange warranty for any quality issues. Please retain your purchase receipt as proof of purchase.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact Gedsffati customer support through the retailer's platform or visit the official Gedsffati store page on Amazon: Gedsffati Store.

9. Product Demonstration Video

Watch this official product video for a visual guide on the Gedsffati 5-in-1 CO detector's features and operation, including a demonstration of its CO detection capabilities.